NZQA Expiring unit standard
2537 version 10
Page 1 of 3
Title
Manufacture and fix flat pressings
Level
3
Credits
10
Purpose
People credited with this unit standard are able to manufacture
flat pressings, and fix flat pressings.
Classification
Joinery > Cabinetry
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Manufacture flat pressings.
This unit standard is
The flat pressing is identified from the working drawings.
expiring
The quantity of material needed
(including adhesives) is calculated and an
Evidence requirements
1.1
1.2
order is placed in accordance with workplace practice.
1.3
The substrate is machined and prepared in accordance with the specifications.
1.4
Adhesive is applied and the laminate is pressed or rolled to the substrate in
accordance with the adhesive manufacturer’s specifications.
1.5
Trimming, finishing, edging, and protection of the top are completed to the
requirements of the specifications or in accordance with workplace practice.
Outcome 2
Fix flat pressings.
Evidence requirements
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2537 version 10
Page 2 of 3
2.1
Fixing methods are identified from the working drawings and the fixings are
ordered in accordance with workplace practice.
2.2
The flat pressings are attached to the carcase or frame in accordance with the
working drawings and specifications.
2.3
Protective measures to ensure workplace safety are employed in accordance
with workplace practice.
Replacement information
This unit standard, unit standard 2527, unit standard
2528, unit standard 2529, and unit standard 25598 have
been replaced by unit standard 28215.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Revision
2
24 October 1995
31 December 2018
Revision
3
16 August 1995
31 December 2018
Revision
4
16 August 1995
31 December 2018
Revision
5
21 October 1997
31 December 2018
Revision
6
20 December 1999
31 December 2018
Revision
Review
Review
Rollover
7
16 June 2005
31 December 2018
This
unit
standard
is
8
23 January 2009
31 December 2018
9
24 October 2014
31 December 2018
expiring
10
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2537 version 10
Page 3 of 3
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016