NZQA Expiring unit standard
2528 version 10
Page 1 of 3
Title
Manufacture cupboard doors and drawers
Level
3
Credits
5
Purpose
People credited with this unit standard are able to: manufacture
cupboard doors; manufacture drawers; and install proprietary
attachments.
Classification
Joinery > Cabinetry
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Manufacture cupboard doors.
This unit standard is
The type of door is identified from the working drawings.
expiring
Evidence requirements
1.1
1.2
Material quantities are determined and an order placed in accordance with
workplace practice.
1.3
The doors are set out to conform to the carcase dimensions.
1.4
The material for the doors is machined to comply with the requirements of the
working drawings and specifications.
1.5
The doors are assembled to conform to the set-out in accordance with
workplace practice.
1.6
The doors are fitted to the carcases in accordance with the specifications.
Outcome 2
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2528 version 10
Page 2 of 3
Manufacture drawers.
Evidence requirements
2.1
The type of drawer is identified from the working drawings and specifications.
2.2
Material quantities are determined and an order placed in accordance with
workplace practice.
2.3
The drawers are set out to conform to the carcase dimensions.
2.4
The materials for the drawers are machined in accordance with workplace
practice.
2.5
The drawers are assembled to conform to the set-out in accordance with
workplace practice.
2.6
Drawer guides are fitted in accordance with the manufacturer's specifications.
2.7
The drawers are fitted to the carcases in accordance with workplace practice.
Outcome 3
Install proprietary attachments.
Evidence requirements
3.1
The attachments are identified from the working drawings.
3.2
Attachments are installed according to the manufacturer’s specifications.
This unit
standard is
This unit standard, unit standard 2527, unit standard
2529, unit standard 2537, and unit standard 25598 have
been
replaced by unit standard 28215.
expiring
Replacement information
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2528 version 10
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Revision
2
24 October 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Review
4
16 August 1995
31 December 2018
Revision
5
21 October 1997
31 December 2018
Revision
6
20 December 1999
31 December 2018
Revision
7
16 June 2005
31 December 2018
Review
8
23 January 2009
31 December 2018
Review
9
24 October 2014
31 December 2018
Rollover
10
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
This unit standard is
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
expiring
CMR also includes useful information
about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016