NZQA Expiring unit standard
2538 version 10
Page 1 of 3
Title
Manufacture special laminated pressings
Level
4
Credits
24
Purpose
People credited with this unit standard are able to demonstrate
knowledge of installation requirements for laminated pressings,
and manufacture special laminated pressings.
Classification
Joinery > Laminate Fabrication
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of installation requirements for special laminated pressings.
This unit standard is
Template requirements are interpreted in accordance with working drawings
and job specifications. expiring
Evidence requirements
1.1
1.2
Template is made in accordance with working drawings and job specifications.
1.3
Fixing methods are identified in accordance with working drawings and job
specifications.
1.4
The procedures for attaching pressings to the carcase or frame are outlined in
accordance with working drawings and job specifications.
1.5
Any potential problems associated with on-site attachment of pressings are
identified, and solutions outlined in accordance with workplace practices.
1.6
Any protective measures required for the finished product are identified and
outlined in accordance with workplace practices.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2538 version 10
Page 2 of 3
Outcome 2
Manufacture special laminated pressings.
Evidence requirements
2.1
The special pressings are identified from working drawings and job
specifications.
2.2
The quantity of material needed, including adhesives and attachments, is
calculated, and an order placed, in accordance with workplace practices.
2.3
Templates are used to ensure job specifications are met, where required, in
accordance with workplace practices.
2.4
The substrate is set-out, machined and prepared in accordance with working
drawings and job specifications.
2.5
The press is set up in accordance with workplace practices and manufacturer’s
specifications.
2.6
Adhesive is applied and the laminate is pressed to the substrate in accordance
with manufacturer’s specifications.
2.7
Trimming, finishing and edging is completed in accordance with working
drawings and job specifications.
2.8
Attachments are fitted to the pressing in accordance with manufacturer’s
specifications.
Range
includes but is not limited to – bowls, basins, inserts, draining
trays.
This unit standard is
Replacement information
This
unit standard and unit standard 14481 have been
expiring
replaced by unit standard 28223.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2538 version 10
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Revision
2
24 October 1995
31 December 2018
Revision
3
16 August 1995
31 December 2018
Revision
4
16 August 1995
31 December 2018
Revision
5
21 October 1997
31 December 2018
Revision
6
20 December 1999
31 December 2018
Review
7
28 June 2005
31 December 2018
Review
8
20 February 2009
31 December 2018
Review
9
24 October 2014
31 December 2018
Rollover
10
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
This unit standard is
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
expiring
CMR also includes useful information
about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016