NZQA Expiring unit standard
2539 version 10
Page 1 of 3
Title
Manufacture and install timber and sheet panelling
Level
4
Credits
7
Purpose
People credited with this unit standard are able to manufacture
timber and sheet panelling, and assemble and fix timber and
sheet panelling.
Classification
Joinery > Cabinetry
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Manufacture timber and sheet panelling.
This unit standard is
The panelling is identified from the working drawings.
expiring
Evidence requirements
1.1
1.2
The quantity of material needed is calculated and an order is placed in
accordance with workplace practice.
1.3
Site conditions are inspected, measured, and documented in accordance with
workplace practice.
1.4
Panels and mouldings are set out and machined to conform to the working
drawings.
1.5
Panels and mouldings are finished to conform to the requirements of the
specifications.
Outcome 2
Assemble and fix timber and sheet panelling.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2539 version 10
Page 2 of 3
Evidence requirements
2.1
On-site conditions are checked in accordance with workplace practice, and
prepared to receive panelling.
2.2
Fixing methods are identified from the working drawings.
2.3
The quantity of fixings needed is calculated and an order is placed in
accordance with workplace practice.
2.4
Panelling and mouldings are fixed to the carcase or frame to conform to the
requirements of the working drawings and specifications.
2.5
Trimming, finishing, and protection of the panelling are completed in
accordance with workplace practice.
Replacement information
This unit standard, unit standard 2522, unit standard
2535, unit standard 25159, unit standard 25602, and unit
standard 25604 have been replaced by unit standard
28224.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
This
unit
standard
is2018
2
24
October 1995
31 December
3
16 August 1995
31 December 2018
expiring
4
16 August
1995
31 December 2018
1
16 August 1995
31 December 2018
Revision
5
21 October 1997
31 December 2018
Revision
6
20 December 1999
31 December 2018
Revision
7
16 June 2005
31 December 2018
Review
8
23 January 2009
31 December 2018
Review
9
24 October 2014
31 December 2018
Rollover
10
17 September 2015
31 December 2018
Revision
Revision
Revision
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2539 version 10
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016