NZQA Expiring unit standard
2540 version 9
Page 1 of 3
Title
Demonstrate knowledge of remedying defects in joinery items
Level
3
Credits
3
Purpose
People credited with this unit standard are able to identify
defects, and describe the process for remedying defects.
Classification
Joinery > Stairs and Other Joinery Trade Skills
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Identify defects.
This unit standard is
Joinery items are inspected and defective parts are identified and documented
in accordance with workplace practice.
expiring
Evidence requirements
1.1
1.2
Replacement materials are identified and measured in accordance with
workplace practice.
Outcome 2
Describe the process for remedying defects.
Evidence requirements
2.1
The process for cutting away defects is described in terms of workplace
practice.
2.2
The process for machining new material to match the existing profiles is
described in terms of workplace practice.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2540 version 9
Page 2 of 3
2.3
The process for working joints is described in accordance with workplace
practice.
2.4
The process for fixing replacement components to match existing profiles is
described in terms of workplace practice.
2.5
The process for trimming and finishing joinery items to the requirements of the
specifications is described in terms of workplace practice.
Replacement information
This unit standard has been replaced by unit standard
28207.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Review
2
16 August 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Revision
4
21 October 1997
31 December 2018
Revision
5
20 December 1999
31 December 2018
Revision
6
16 June 2005
31 December 2018
Review
7
23 January 2009
31 December 2018
This
unit
is2018
9
17
Septemberstandard
2015
31 December
expiring
Consent and Moderation Requirements
(CMR) reference
0073
Review
8
24 October 2014
31 December 2018
Rollover
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2540 version 9
Page 3 of 3
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016