NZQA Expiring unit standard
Title
Manufacture timber gates
Level
3
2542 version 9
Page 1 of 3
Credits
4
Purpose
People credited with this unit standard are able to: set out
gates; machine timber for gates; and assemble the gates.
Classification
Joinery > Door and Window Joinery
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Set out gates.
1.2
This unit standard is
The type of gate is identified from the working drawings.
expiring
Timber profiles are determined
from the working drawings.
1.3
The gates are set out to conform to the working drawings.
1.4
A cutting list is prepared in accordance with workplace practice.
Evidence requirements
1.1
Outcome 2
Machine timber for gates.
Evidence requirements
2.1
Timber is selected and cut with minimum waste in accordance with workplace
practice.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2542 version 9
Page 2 of 3
2.2
Timber is machined and joints are worked to conform to the set out rods in
accordance with workplace practice.
2.3
Inside edges are finished as specified in accordance with workplace practice.
Outcome 3
Assemble the gates.
Evidence requirements
3.1
Cramps are positioned to suit the configuration of the gate in accordance with
workplace practice.
3.2
A dry assembly check meets set out rod requirements in accordance with
workplace practice.
3.3
Adhesive is applied and the gates are assembled in accordance with workplace
practice.
3.4
The gates are completed to specifications or customer requirements.
3.5
Protective measures to ensure workplace safety are employed in accordance
with workplace practice.
Replacement information
This unit standard, unit standard 2518, unit standard
2519, unit standard 2520, unit standard 2523, unit
standard 2524, and unit standard 2525 have been
replaced by unit standard 28218.
This unit standard is
expiring
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2542 version 9
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Revision
2
16 August 1995
31 December 2018
Revision
3
16 August 1995
31 December 2018
Revision
4
21 October 1997
31 December 2018
Revision
5
20 December 1999
31 December 2018
Revision
6
16 June 2005
31 December 2018
Review
7
23 January 2009
31 December 2018
Review
8
24 October 2014
31 December 2018
Rollover
9
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
This unit standard is
expiring
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016