NZQA Expiring unit standard
1057 version 10
Page 1 of 3
Title
Install neon or illuminated signs
Level
4
Purpose
Credits
10
This unit standard is for people in the signmaking industry.
People credited with this unit standard are able to plan the
installation, and install neon or illuminated signs.
Classification
Graphic Arts > Signmaking
Available grade
Achieved
Explanatory notes
All work practices shall meet the requirements of relevant legislation, including Health and
Safety in Employment Act 1992, Resource Management Act 1991, Electricity Regulations
1997, and the requirements of industry codes of practice and documented enterprise
procedures in respect to health, safety, and environmental matters.
Outcomes and evidence requirements
Outcome 1
Plan the installation.
This unit standard is
Job specifications are determined and confirmed prior to commencement.
expiring
Planned job sequence meets
agreed completion time and is coordinated with
Evidence requirements
1.1
1.2
other personnel.
1.3
Materials and equipment required for installation are determined and arranged
to meet job schedule.
1.4
Permit and clearance requirements are obtained prior to commencement.
1.5
Position of sign is confirmed by inspection of worksite prior to installation.
Outcome 2
Install neon or illuminated signs.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1057 version 10
Page 2 of 3
Evidence requirements
2.1
Visible faults and deterioration in wiring system are identified, and reported to
supervisor prior to installation.
2.2
Wiring is connected to transformer in accordance with Electricity Regulations.
2.3
Lighting system is installed, tested and operational in compliance with electrical
safety regulations, local by-laws, and electricity supply authority regulations.
2.4
Completed installation complies with job specifications.
2.5
Site clean-up is completed as specified in the contract.
Replacement information
This unit standard, unit standard 1050, unit standard
1051, unit standard 1052, and unit standard 1056 have
been replaced by unit standard 27580.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
27 April 1995
31 December 2014
Review
2
25 March 1996
31 December 2014
Revision
3
31 January 1997
31 December 2014
Revision
This
unit standard
is
5
12 December 2000
31 December 2014
6
16 December 2003
expiring 31 December 2014
4
9 March 1999
31 December 2014
7
23 January 2009
31 December 2014
Review
8
19 January 2012
31 December 2014
Reinstatement
9
16 April 2015
31 December 2019
Rollover
10
10 December 2015
31 December 2019
Revision
Review
Rollover and
Revision
Consent and Moderation Requirements (CMR) reference
0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1057 version 10
Page 3 of 3
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016