NZQA Expiring unit standard Title Embellish signs Level 3 Purpose 1048 version 10 Page 1 of 3 Credits 5 This unit standard is for people in the signmaking industry. People credited with this unit standard are able to embellish signs. Classification Graphic Arts > Signmaking Available grade Achieved Explanatory notes All work practices shall meet the requirements of relevant legislation, including Building Act 2004, Health and Safety in Employment Act 1992, Resource Management Act 1991, and the requirements of industry codes of practice and documented enterprise procedures in respect to health, safety, and environmental matters. Outcomes and evidence requirements Outcome 1 Embellish signs. This unit standard is Evidence requirements expiring Range examples include but are not limited to – lines, scrolls, blends, borders, panels, decorative effects. 1.1 Client requirements are established and confirmed prior to commencement of work. 1.2 Embellishment incorporates layout principles and design brief requirements. Range includes but is not limited to – balance, symmetry, proportion, harmony. 1.3 Colours of embellishments are harmonious with other colour elements in design and comply with design brief. 1.4 Decorative effects are executed according to design brief. Range Competenz SSB Code 101571 examples include but are not limited to – blending, stipple, brushed, sprayed, taped, ripple discs. New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 1.5 1048 version 10 Page 2 of 3 All embellishments are completed in accordance with job specification. Replacement information This unit standard, unit standard 1034, unit standard 1035, and unit standard 1036 have been replaced by unit standard 27575. This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below. Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 27 April 1995 31 December 2014 Review 2 25 March 1996 31 December 2014 Revision 3 31 January 1997 31 December 2014 Revision 4 9 March 1999 31 December 2014 Revision 5 12 December 2000 31 December 2014 Review 6 16 December 2003 31 December 2014 Rollover and Revision 7 23 January 2009 31 December 2014 Review 8 19 January 2012 31 December 2014 Reinstatement 9 16 April 2015 31 December 2019 Rollover 10 10 December 2015 31 December 2019 This unit standard is expiring Consent and Moderation Requirements (CMR) reference 0005 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 1048 version 10 Page 3 of 3 to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. This unit standard is expiring Competenz SSB Code 101571 New Zealand Qualifications Authority 2016