How to create the system recovery disk,
USB flash drive or recovery ISO file?
0
Prepared by MSI NB FAE Team | Version: 1.0 | Date: 2014/07/16
Note:
I.
II.
III.
Before using the System Recovery Function, please backup the important data saved in the
system driver to other storage devices.
If an USB flash driver is used for performing the Recover Function, please be noted that it is
always necessaryf to backup the data saved in the USB flash drive to other storage devices.
Please make sure that the Optical Drive on your system supports the function of burning DVD
writable disks. If not, you will be suggested to make the Recovery ISO image files instead, and
then make the Recovery disk shortly after an Optical Drive is available.
BurnRecovery Tool
1.
Find the shortcut of BurnRecovery on the Start Screen or Windows desktop.
2.
Double click on the shortcut to execute the Recovery Image Backup Tool.
| 1
Create and Burn a Recovery Disk
1.
To create and burn a Recovery Disk, select [Recovery Disk], and then follow the on-screen
instructions to continue.
2.
Prepare the number of the writable disk as requested.
3.
4.
Place the disk into the optical drive device, and then select [Burn].
*Note: Closing the other applications while burning the recovery disk is suggested.
Click [Close] when a disk is successfully created.
| 2
5.
6.
Click [Next] to continue the procedure of creating and burning recovery disks.
Exchange and place the rest disks into the optical drive device as instructed.
7.
All recovery disks created successfully.
| 3
Create a Recovery USB Flash Disk
1.
To create a Recovery USB Flash Disk, select [USB], and then follow the on-screen instructions
to continue.
2.
Insert an USB flash disk with the capacity required.
3.
Select the directory path of the inserted USB flash disk, and then select [Next].
4.
Recovery disks burned successfully.
| 4
Create a Recovery ISO File
1.
To create a Recovery ISO file, select [ISO], and then follow the on-screen instructions to
continue.
2.
Select the directory path of where the ISO file will be saved, and then select [Next] and [OK]
to continue.
3.
Recovery ISO file created and saved successfully.
4.
This ISO file can be used to make a recovery disk with a burning software.
| 5