One component polyurea moisture cure coating for concrete and steel in the application of anticorrosion & waterproofing as well as a general high performance single part coating.
A high-performance one component polyurea prepolymer resin integrating various technologies together. The film of coating contains large amounts of carbamate bonds, biuret bond and urea bond.
It specially includes Hydrogen bonds to contribute large cohesive force among molecules inside the film. It causes the coating to possess super strong properties of anticorrosion, waterproof, wear resistance, temperature variation, aging resistance, chemicals resistance and UV resistance.
:
Adhesive strength
Impact strength
Tensile strength
Elongation
Penetrate resistance
Temperature variation
Wear resistance （ 700g/500r ）
Acid resistance (20%H2SO4 or 10%HCI, 30d)
Alkali resistance 40%NaOH, 30d
Salt resistance 100g/L, 30d
Salt spray resistance 1500h
Oil resistance (diesel crude oil 30d)
3.5 Mpa( or substrate broken)
≥ 50kg• cm
18Mpa
350%
2.6Mpa
-40 to +160
8mg no rust no bubbles no peel no rust no bubbles no peel no rust no bubbles no peel no rust no bubbles no peel no rust no bubbles no peel
Page 1 of 3

Color
Luster
Density
Volume solid content
VOC
Recommended dry film thickness
Theoretical coverage
Multiple colours as customers’ need
Supplied as a Matt or Gloss Finish as per request.
1.06g/cm
81%± 2%
≤ 178g/L
200-
350μ m
0.23kg/sqm (calculated by the above solids percentage and dry film thickness of 175 microns)
Dry time
Over coating interval min:
Coating method
Flash point
1-3h
3h, max: 28h
Airless spray, Air spray, Brush, Roller
61 ℃
No.
Name of products
1 Primer 614 Sealant
FlexiSeal 112 G or M
2
3
Total
FlexiSeal 112 G or M
Layers
Dry film thickness （ μm ）
50
1
1 80-150
1 80-150
210-350
3
Page 2 of 3

Buildings, bridges, tunnels, terminals and a variety of large concrete and steel structures as well as various other surface and substrates.
10 months (Indoor with dry and cool conditions)
20 lt open top steel tins
Do not apply on wet surfaces.
The information provided in this data sheet and otherwise supplied to users is based on our general experience and upon tests which are believed to be reliable However, because we have no control over the exact manner in which the information is used, we cannot guarantee the results to be obtained. Furthermore we make no express or implied warranty of merchantability or fitness of the product for a particular use.
The information contained in this data sheet is correct and accurate to the best of our knowledge but without warranty or liability.
Page 3 of 3