NZQA Expiring unit standard
1041 version 10
Page 1 of 2
Title
Render artwork to prepared surface
Level
3
Credits
Purpose
10
This unit standard is for people in the signmaking industry.
People credited with this unit standard are able to prepare to
render artwork to prepared surface, and render artwork to
prepared surface.
Classification
Graphic Arts > Signmaking
Available grade
Achieved
Explanatory notes
All work practices shall meet the requirements of relevant legislation, including Health and
Safety in Employment Act 1992, Resource Management Act 1991, and the requirements
of industry codes of practice and documented enterprise procedures in respect to health,
safety, and environmental matters.
Outcomes and evidence requirements
Outcome 1
Prepare to render artwork to prepared surface.
This unit standard is
Confirmation of job requirements is obtained before proceeding.
expiring
Evidence requirements
1.1
1.2
Materials and equipment are selected and set up as per job requirements.
Outcome 2
Render artwork to prepared surface.
Evidence requirements
2.1
Rendering method/s selected are consistent with requirements for substrate and
to job specifications.
Range
2.2
includes but is not limited to – brush, spray, vinyl, pens.
Finished artwork complies with brief and is to client satisfaction.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2.3
1041 version 10
Page 2 of 2
Even, complete coverage is achieved with protective coating compatible with
selected rendering method.
Replacement information
This unit standard and unit standard 1040 have been
replaced by unit standard 27576.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
27 April 1995
31 December 2014
Review
2
25 March 1996
31 December 2014
Revision
3
31 January 1997
31 December 2014
Revision
4
9 March 1999
31 December 2014
Revision
5
12 December 2000
31 December 2014
Review
6
16 December 2003
31 December 2014
Rollover and
Revision
7
23 January 2009
Review
8
19 January 2012
31 December 2014
Reinstatement
9
16 April 2015
31 December 2019
Rollover
10
10 December 2015
31 December 2019
31 December 2014
This unit standard is
Please note
expiring
Providers must be granted consent to assess against standards (accredited) by NZQA,
Consent and Moderation Requirements (CMR) reference
0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016