NZQA Expiring unit standard
984 version 5
Page 1 of 3
Title
Plan an automotive department layout
Level
5
Credits
6
Purpose
This unit standard is for people in automotive service and sales
areas. People credited with this unit standard are able to:
gather information on the business required for an automotive
department; determine the layout of an automotive department;
and plan the work flow for an automotive department.
Classification
Motor Industry > Automotive Administration
Available grade
Achieved
Entry information
Explanatory notes
The following legislation, regulations, and their amendments are required to be consulted
and followed where applicable:
–
Building Act, 1991
–
Dangerous Goods Act, 1974
–
Health and Safety in Employment Act, 1992
–
Resource Management Act, 1991
–
Local Body Regulations.
Outcomes and evidence requirements
Outcome 1
Gather information on the business required for an automotive department.
Evidence requirements
1.1
Type of product and service required for the department is identified from the
company's management.
1.2
A budget for the planned department is obtained from management.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
984 version 5
Page 2 of 3
Outcome 2
Determine the layout of an automotive department.
Evidence requirements
2.1
A timetable for producing a layout plan is verified with management.
2.2
The space available for the department is verified with management.
2.3
The equipment and fittings required to carry out the department's business are
determined and verified with management.
2.4
The layout meets management criteria.
Range
company image, work flow, energy efficiency, interface with other
departments.
Outcome 3
Plan the work flow for an automotive department.
Evidence requirements
3.1
A flow chart is produced which meets the needs of all facilities for the
department and is accepted by management.
Replacement information
This unit standard has been replaced by unit standard
22788.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
9 November 1993
31 December 2016
Review
2
4 October 1996
31 December 2016
Review
3
26 February 1999
31 December 2016
Review
4
25 June 2007
31 December 2016
Rollover
5
19 November 2010
31 December 2016
Accreditation and Moderation Action Plan (AMAP) reference
0014
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
984 version 5
Page 3 of 3
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016