DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange
suitable for downlighting and accent applications. Utilizes PAR38MH metal halide
lamps in 1 - 6 light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing, Plaster Frame: 14 gauge CRS.
Trim assembly: 18 gauge CRS, J-Box
Assembly: 16 gauge CRS (galvanized).
One piece plasterframe construction
for added stability. Fixture utilizes a
removable trim sleeve to provide a 0.75”
(19mm) flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” (13mm) to 1.00”
(25mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame
with easy below-ceiling access. Wiring
is passed through fixture using flexible,
conduit.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical accessible through
ceiling opening.
Lamps
One, two, three, four, five, or six PAR38MH
lamps mounted in standard yokes. Lamp
can accept optical accessories. 380º x 45º
locking lamp adjustment. Includes Med.
base sockets. Lamps not included.
Dimensions in inches / mm
Config.
A
B
D
C
26.39” 8.40” 8.53” 10.45” 10.35”
670
213
217
265
263
CO2
35.13” 16.99” 8.53” 10.45” 10.35”
892
432
217
265
263
CO3
43.83” 25.84” 8.53” 10.45” 10.35”
1113 656
217
265
263
CO4
57.73” 34.74” 8.53” 10.45” 10.35”
1466 882
217
265
263
CO5
66.59” 43.59” 8.53” 10.45” 10.35”
1691 1107 217
265
263
CO6
75.48” 52.49” 8.53” 10.45” 10.35”
1917 1333 217
265
263
COX
40.73” 17.50” 17.38” 20.25” 10.35”
1034 445
441
514
263
COMBOLIGHT®
CO SERIES
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Recessed Multi-Lamp
Fixture
1, 2, 3, 4, 5, or 6 Light
PAR38MH
Ceiling Cut-Outs
CO1 = 9.44” x 9.85”
CO2 = 9.44” x 18.44”
CO3 = 9.44” x 27.29”
CO4 = 9.44” x 36.19”
CO5 = 9.44” x 45.04”
CO6 = 9.44” x 53.94”
COX = 18.37” x 18.46”
D
E
CO1
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers.
New Construction
Recessed Housing
w/ 0.75” (19mm) trim
A
Metal Halide
Ballasts
E
380º x 45º
locking adjustment
B
Trim
Detail
8.75”
8.75”
222mm
222mm
Thermal
Protector
C
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
Housing
N = New Construction
E
Lamp Type / Wattage
070M38 = 70W PAR38MH
100M38 = 100W PAR38MH*
*Up to four lamps only
Power Supply
E = Electronic Metal Halide
Ballast
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
S = Retractable Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
W = White
B = Black
S = Industrial
Silver
rev 061710