DESCRIPTION An adjustable Multi-lamp Recessed fixture with a trimless opening suitable for downlighting and accent applications. Utilizes PAR38MH Metal Halide lamps in 1 - 6 light configurations. For new construction applications. Insulation must be kept 3” (76mm) from all sides and at least 1” (25mm) above the housing. Catalog # Type Project Comments Date Prepared by SPECIFICATION FEATURES Housing Housing and Plaster Frame Assembly: 18 gauge CRS. J-Box Assembly: 16 gauge CRS (galvanized). One piece plasterframe construction for added stability. Perforated mesh plaster frame adheres to ceiling compound for seamless trimless installation in drywall ceilings. Beveled fixture opening provides easy mudding compound application. Can accommodate 0.50” (13mm) to 1.25” (32mm) ceiling thickness. System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing allow greater airflow. Junction Box Junction box is UL listed for through branch wiring, (access above ceiling not required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame with easy below-ceiling access. Electrical Integral electronic metal halide ballasts accessible through ceiling opening. Lamps One, two, three, four, five, or six PAR38MH lamps mounted in standard yokes. Lamp can accept optical accessories. 380º x 45º locking lamp adjustment. Includes Med. base sockets. Lamps not included. Dimensions in inches / mm Config. A B D C 27.14” 8.65” 8.50” 13.91” 8.93” 689 220 216 353 226 CO2 35.73” 17.24” 8.50” 13.91” 8.93” 908 438 216 353 226 CO3 44.94” 26.09” 8.50” 13.91” 8.93” 1141 663 216 353 226 CO4 53.84” 35.00” 8.50” 13.91” 8.93” 1368 889 216 353 226 CO5 67.24” 43.84” 8.50” 13.91” 8.93” 1708 1114 216 353 226 CO6 76.14” 52.74” 8.50” 13.91” 8.93” 1934 1340 216 353 226 COX 35.73” 17.38” 17.50” 22.81” 8.93” 908 441 445 579 226 COMBOLIGHT® CO SERIES Labels cULus listed for non-type IC applications, suitable for use in damp locations. Recessed Multi-Lamp Fixture Ceiling Cut-Outs CO1 = 11.65” x 11.55” CO2 = 20.24” x 11.55” CO3 = 29.45” x 11.55” CO4 = 38.35” x 11.55” CO5 = 47.25” x 11.55” CO6 = 56.15” x 11.55” COX = 20.24” x 20.45” D E CO1 Mounting Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. 1, 2, 3, 4, 5, or 6 Light PAR38MH New Construction Recessed Housing Trimless Electrical Wiring Compartment accessible through fixture opening A Removable Electrical Maintenance Doors (both ends) Metal Halide Ballast Metal Halide Ballast E Trimless Detail Ceiling mudding Thermal compound is applied Protector directly to the edge of the aperture. B 8.75” 8.75” 222mm 222mm 380º x 45º locking adjustment Butterfly Brackets for Black Iron Mounting C ORDERING INFORMATION N Configuration CO1 = One (1) Light CO2 = Two (2) Light CO3 = Three (3) Light CO4 = Four (4) Light CO5 = Five (5) Light CO6 = Six (6) Light COX = Four (4) Light Sq. www.cooperlighting.com Housing N = New Construction E Lamp Type / Wattage 070M38 = 70W PAR38MH 100M38 = 100W PAR38MH Power Supply E = Electronic Metal Halide Ballast N Power Supply Voltage 1 = 120V 2 = 277V 4 = 240V Yoke Y = Standard Yoke R = Retractable Yoke D = Double Gimbal Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801 Housing Interior Finish W = White B = Black S = Industrial Silver Installation N = Trimless rev 102710