DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange
suitable for downlighting and accent applications. Utilizes CMHMR16 metal
halide lamps in 1 - 6 light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing, Plaster Frame: 14 gauge CRS.
Trim assembly: 18 gauge CRS, J-Box
Assembly: 16 gauge CRS (galvanized).
One piece plasterframe construction
for added stability. Fixture utilizes a
removable trim sleeve to provide a 0.75”
(19mm) flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” (13mm) to 1.00”
(25mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame
with easy below-ceiling access. Wiring
is passed through fixture using flexible,
conduit.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical accessible through
ceiling opening.
Lamps
One, two, three, four, five, or six CMHMR16
lamps mounted in standard yokes. Lamp
can accept optical accessories. 380º x
45º locking lamp adjustment. Lamps not
included. Pre-wired GX10 TAL sockets
included.
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers.
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Outs
CO1 = 4.69” x 5.21”
CO2 = 4.69” x 9.20”
CO3 = 4.69” x 12.94”
CO4 = 4.69” x 16.77”
CO5 = 4.69” x 20.58”
CO6 = 4.69” x 24.39”
COX = 8.55” x 8.55”
A
B
D
C
CO SERIES
Recessed Multi-Lamp
Fixture
1, 2, 3, 4, 5, or 6 Light
CMHMR16 Metal Halide
New Construction
Recessed Housing
w/ 0.75” (19mm) trim
29.48”
Dimensions in inches / mm
Config.
COMBOLIGHT®
749mm
E
CO1
21.69” 3.55” 3.83” 7.75” 6.70”
551
90
97
197
170
CO2
25.68” 7.69” 3.83” 7.75” 6.70”
652
195
97
197
170
CO3
29.48” 11.49” 3.83” 7.75” 6.70”
748
291
97
197
170
CO4
38.25” 15.26” 3.83” 7.75” 6.70”
972
389
97
197
170
CO5
42.09” 19.10” 3.83” 7.75” 6.70”
1069 485
97
197
170
CO6
45.90” 22.91” 3.83” 7.75” 6.70”
1166 582
97
197
170
COX
30.53” 7.95” 7.95” 10.71” 6.70”
775
202
202
272
170
D
A
Metal Halide
Ballasts
E
Trim
Detail
380º x 45º
locking adjustment
B
3.75”
95mm
3.75”
95mm
Thermal
Protector
9.38”
C
238mm
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
Housing
N = New Construction
E
Lamp Type / Wattage
020C16 = CMHMR16 20W
039C16 = CMHMR16 39W
Power Supply
E = Electronic Metal Halide
Ballast
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240V
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
W = White
B = Black
S = Industrial
Silver
rev 063010