DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a trimless opening suitable for
downlighting and accent applications. Utilizes CMHMR16 metal halide lamps in 1 - 6
light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing and Plaster Frame Assembly:
18 gauge CRS. J-Box Assembly: 16
gauge CRS (galvanized). One piece
plasterframe construction for added
stability. Perforated mesh plaster frame
adheres to ceiling compound for seamless
trimless installation in drywall ceilings.
Beveled fixture opening provides easy
mudding compound application. Can
accommodate 0.50” (13mm) to 1.25”
(32mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame with
easy below-ceiling access.
Electrical
Integral electronic metal halide ballasts accessible through ceiling opening.
Lamps
One, two, three, four, five, or six CMHMR16
metal halide lamps mounted in standard
yokes. Lamp can accept optical
accessories. 380º x 45º locking lamp
adjustment. Includes GX10 TAL sockets.
Lamps not included.
A
B
D
C
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
CO1
22.18” 3.80” 3.80” 9.14” 5.89”
563
97
97
232
150
CO2
26.28” 7.94” 3.80” 9.14” 5.89”
668
202
97
232
150
CO3
34.60” 11.74” 3.80” 9.14” 5.89”
879
298
97
232
150
CO4
38.36” 15.50” 3.80” 9.14” 5.89”
974
394
97
232
150
Electrical Wiring Compartment
accessible through fixture opening.
42.12” 19.35” 3.80” 9.14” 5.89”
1069 491
97
232
150
CO6
46.02” 23.16” 3.80” 9.14” 5.89”
1169 588
97
232
150
COX
26.30” 7.94” 8.06” 13.40” 5.89”
668
201
205
340
150
Removable Electrical
Maintenance Doors
(both ends)
E
Ceiling mudding
compound is applied
directly to the edge
of the aperture.
B
Trimless
Detail
3.85”
98mm
CO5
CO SERIES
Recessed Multi-Lamp
Fixture
New Construction
Recessed Housing
Trimless
A
E
COMBOLIGHT®
1, 2, 3, 4, 5, or 6 Light
CMHMR16 Metal Halide
Ceiling Cut-Outs
CO1 = 6.75” x 6.65”
CO2 = 6.75” x 10.79”
CO3 = 6.75” x 14.79”
CO4 = 6.75” x 18.35”
CO5 = 6.75” x 22.20”
CO6 = 6.75” x 26.01”
COX = 11.01” x 10.79”
D
Dimensions in inches / mm
Config.
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers.
3.85”
98mm
3.85”
98mm
380º x 45º
locking adjustment
Thermal
Protector
Butterfly
Brackets
for Black Iron
Mounting
C
Electronic Metal Halide Ballasts
1 - 6 light configurations
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
Housing
N = New Construction
N
Lamp Type / Wattage
020C16 = 20W CMHMR16
039C16 = 39W CMHMR16
Power Supply
E = Electronic Metal Halide
Ballast
Power Supply Voltage
1 = 120V
2 = 277V
3 = 347V
4 = 240V
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Installation
N = Trimless
rev 092111