DESCRIPTION An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange suitable for downlighting and accent applications. Utilizes 120V PAR20 incandescent lamps in 1 - 6 light configurations. For new construction applications. Insulation must be kept 3” (76mm) from all sides and at least 1” (25mm) above the housing. Catalog # Type Project Comments Date Prepared by SPECIFICATION FEATURES Housing Housing, Plaster Frame: 14 gauge CRS. Trim assembly: 18 gauge CRS, J-Box Assembly: 16 gauge CRS (galvanized). One piece plasterframe construction for added stability. Fixture utilizes a removable trim sleeve to provide a 0.75” (19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50” (13mm) to 1.00” (25mm) ceiling thickness. Junction Box Junction box is UL listed for through branch wiring, (access above ceiling not required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame with easy below-ceiling access. Wiring is passed through fixture using flexible, conduit. System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing allow greater airflow. Lamps One, two, three, four, five, or six PAR20 120V lamps mounted in standard yokes. Lamp can accept optical accessories. 380º x 45º locking lamp adjustment. Includes Med. base sockets. Lamps not included. Dimensions in inches / mm Config. A B D C E CO1 24.39” 6.40” 6.53” 9.50” 8.35” 620 163 166 241 212 CO2 31.93” 13.94” 6.53” 9.50” 8.35” 811 354 166 241 212 CO3 38.78” 20.79” 6.53” 9.50” 8.35” 985 528 166 241 212 CO4 50.63” 27.64” 6.53” 9.50” 8.35” 1286 702 166 241 212 CO5 57.53” 35.54” 6.53” 9.50” 8.35” 1461 903 166 241 212 CO6 64.38” 41.39” 6.53” 9.50” 8.35” 1635 1051 166 241 212 COX 36.73” 13.74” 14.21” 17.25” 8.35” 932 349 361 438 212 Electrical Electrical accessible through ceiling opening. J-Box mounted to plasterframe. Mounting Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. COMBOLIGHT® CO SERIES Labels cULus listed for non-type IC applications, suitable for use in damp locations. Recessed Multi-Lamp Fixture Ceiling Cut-Outs CO1 = 7.35” x 7.76” CO2 = 7.35” x 15.30” CO3 = 7.35” x 22.15” CO4 = 7.35” x 29.00” CO5 = 7.35” x 35.90” CO6 = 7.35” x 42.75” COX = 15.10” x 15.03” 1, 2, 3, 4, 5, or 6 Light 120V PAR20 New Construction Recessed Housing w/ 0.75” (19mm) trim D A E Trim Detail 380º x 45º locking adjustment B 6.75” 171mm 6.75” 171mm Thermal Protector C ORDERING INFORMATION N Configuration CO1 = One (1) Light CO2 = Two (2) Light CO3 = Three (3) Light CO4 = Four (4) Light CO5 = Five (5) Light CO6 = Six (6) Light COX = Four (4) Light Sq. www.cooperlighting.com Housing N = New Construction Lamp Type / Wattage 050P20= 50W Max. 120V PAR20 Power Supply N = None - Line Voltage Power Supply Voltage 1 = 120V Yoke Y = Standard Yoke R = Retractable Yoke D = Double Gimbal Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801 Housing Interior Finish W = White B = Black S = Industrial Silver Trim Finish W = White B = Black S = Industrial Silver rev 070610