DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange
suitable for downlighting and accent applications. Utilizes 12V AR111 halogen
lamps in 1 - 6 light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing, Plaster Frame: 14 gauge CRS.
Trim assembly: 18 gauge CRS, J-Box
Assembly: 16 gauge CRS (galvanized).
One piece plasterframe construction
for added stability. Fixture utilizes a
removable trim sleeve to provide a 0.75”
(19mm) flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” (13mm) to 1.00”
(25mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Dimensions in inches / mm
Config.
A
B
D
C
E
CO1
24.39” 6.40” 6.53” 9.50” 8.35”
620
163
166
241
212
CO2
31.93” 13.94” 6.53” 9.50” 8.35”
811
354
166
241
212
CO3
38.78” 20.79” 6.53” 9.50” 8.35”
985
528
166
241
212
CO4
50.63” 27.64” 6.53” 9.50” 8.35”
1286 702
166
241
212
CO5
57.53” 35.54” 6.53” 9.50” 8.35”
1461 903
166
241
212
CO6
64.38” 41.39” 6.53” 9.50” 8.35”
1635 1051 166
241
212
COX
36.73” 13.74” 14.21” 17.25” 8.35”
932
349
361
438
212
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame
with easy below-ceiling access. Wiring
is passed through fixture using flexible,
conduit.
Electrical
Integral electronic or magnetic low voltage
transformers. 11.5V. Dimmable*. Transformers and electrical accessible through
ceiling opening.
Lamps
One, two, three, four, five, or six 12V AR111
lamps mounted in standard yokes. Lamp
can accept optical accessories. 380º x
45º locking lamp adjustment. Lamps not
included.
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers.
COMBOLIGHT®
CO SERIES
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Recessed Multi-Lamp
Fixture
Ceiling Cut-Outs
CO1 = 7.35” x 7.76”
CO2 = 7.35” x 15.30”
CO3 = 7.35” x 22.15”
CO4 = 7.35” x 29.00”
CO5 = 7.35” x 35.90”
CO6 = 7.35” x 42.75”
COX = 15.10” x 15.03”
1, 2, 3, 4, 5, or 6 Light
12V AR111
New Construction
Recessed Housing
w/ 0.75” (19mm) trim
D
A
Low Voltage
Transformers
E
Trim
Detail
380º x 45º
locking adjustment
B
6.75”
171mm
6.75”
171mm
Thermal
Protector
C
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
Housing
N = New Construction
Lamp Type / Wattage
035A11= 12V AR111 35W
050A11= 12V AR111 50W
075A11= 12V AR111 75W
100A11= 12V AR111 100W
Power Supply
E = Electronic Transformer
M = Magnetic Transformer
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240V
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
W = White
B = Black
S = Industrial
Silver
rev 062110