DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange
suitable for downlighting and accent applications. Utilizes PAR30MH metal halide
lamps in 1 - 6 light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing, Plaster Frame: 14 gauge CRS.
Trim assembly: 18 gauge CRS, J-Box
Assembly: 16 gauge CRS (galvanized).
One piece plasterframe construction
for added stability. Fixture utilizes a
removable trim sleeve to provide a 0.75”
(19mm) flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” (13mm) to 1.00”
(25mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Dimensions in inches / mm
Config.
A
B
D
C
E
CO1
24.39” 6.40” 6.53” 9.50” 9.30”
620
163
166
241
236
CO2
31.93” 13.94” 6.53” 9.50” 9.30”
811
354
166
241
236
CO3
38.78” 20.79” 6.53” 9.50” 9.30”
985
528
166
241
236
CO4
50.63” 27.64” 6.53” 9.50” 9.30”
1286 702
166
241
236
CO5
57.53” 34.54” 6.53” 9.50” 9.30”
1461 877
166
241
236
CO6
64.38” 41.39” 6.53” 9.50” 9.30”
1635 1051 166
241
236
COX
36.73” 13.74” 14.21” 17.25” 9.30”
932
349
361
438
236
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame
with easy below-ceiling access. Wiring
is passed through fixture using flexible,
conduit.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical accessible through
ceiling opening.
Lamps
One, two, three, four, five, or six PAR30MH
lamps mounted in standard yokes. Lamp
can accept optical accessories. 380º x 45º
locking lamp adjustment. Includes Med.
base sockets. Lamps not included.
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers.
COMBOLIGHT®
CO SERIES
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Recessed Multi-Lamp
Fixture
Ceiling Cut-Outs
CO1 = 7.32” x 7.73”
CO2 = 7.32” x 15.27”
CO3 = 7.32” x 22.12”
CO4 = 7.32” x 28.97”
CO5 = 7.32” x 35.87”
CO6 = 7.32” x 42.72”
COX = 15.00” x 15.07”
1, 2, 3, 4, 5, or 6 Light
PAR30MH
New Construction
Recessed Housing
w/ 0.75” (19mm) trim
D
A
Metal Halide
Ballasts
E
Trim
Detail
380º x 45º
locking adjustment
B
6.75”
171mm
Thermal
Protector
6.75”
171mm
C
1 - 6 light configurations
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
Housing
N = New Construction
E
Lamp Type / Wattage
039M30 = 39W PAR30MH
070M30 = 70W PAR30MH
Power Supply
E = Electronic Metal Halide
Ballast
Power Supply Voltage
1 = 120V
2 = 277V
3 = 347V
4 = 240V
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
W = White
B = Black
S = Industrial
Silver
rev 092111