DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75” (19mm) trim flange suitable for downlighting and accent applications. Utilizes CDMR111 metal halide lamps in 1 - 6 light configurations.
Catalog #
Project
Comments
For new construction applications. Insulation must be kept 3” (76mm) from all sides and at least 1” (25mm) above the housing.
Prepared by
SPECIFICATION FEATURES
Housing
Housing, Plaster Frame: 14 gauge CRS.
Trim assembly: 18 gauge CRS, J-Box
Assembly: 16 gauge CRS (galvanized).
One piece plasterframe construction for added stability. Fixture utilizes a removable trim sleeve to provide a 0.75”
(19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling.
Can accommodate 0.50” (13mm) to 1.00”
(25mm) ceiling thickness.
System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing allow greater airflow.
Junction Box
Junction box is UL listed for through branch wiring, (access above ceiling not required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame with easy below-ceiling access. Wiring is passed through fixture using flexible, conduit.
Electrical
Integral electronic metal halide ballasts.
Ballasts and electrical accessible through ceiling opening.
Lamps
One, two, three, four, five, or six CDMR111 lamps mounted in standard yokes. Lamp can accept optical accessories. 380º x
45º locking lamp adjustment. Lamps not included.
Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar hangers.
Labels cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Outs
CO1 = 7.35” x 7.76”
CO2 = 7.35” x 15.30”
CO3 = 7.35” x 22.15”
CO4 = 7.35” x 29.00”
CO5 = 7.35” x 35.90”
CO6 = 7.35” x 42.75”
COX = 15.10” x 15.03”
Type
Date
®
Dimensions in inches / mm
Config.
A
CO1
B
24.39”
620
6.40”
163
C D
6.53”
166
9.50”
241
E
8.35”
212
CO2
31.93”
811
13.94”
354
6.53”
166
9.50”
241
8.35”
212
CO3
38.78”
985
20.79”
528
6.53”
166
9.50”
241
8.35”
212
CO4
50.63”
1286
27.64”
702
6.53”
166
9.50”
241
8.35”
212
CO5
57.53”
1461
35.54”
903
6.53”
166
9.50”
241
8.35”
212
CO6
64.38”
1635
41.39”
1051
6.53”
166
9.50”
241
8.35”
212
COX
36.73”
932
13.74”
349
14.21”
361
17.25”
438
8.35”
212
D
E
Trim
Detail
C
A
6.75”
171mm
B
6.75”
171mm
Metal Halide
Ballasts
380º x 45º locking adjustment
Thermal
Protector
ORDERING INFORMATION
N
Configuration
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
Housing
N = New Construction
Lamp Type / Wattage
039C11 = CDMR111 39W
070C11 = CDMR111 70W
Power Supply
E = Electronic Metal Halide
Ballast
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240V
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal www.cooperlighting.com
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Trim Finish
W = White
B = Black
S = Industrial
Silver rev 091510