JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA – 533 003. Andhra Pradesh
Tender Notice No. JNTUK/DAP/IST/NT
Dated 18-04-2013
Sealed Tenders are invited for the supply of Lab Equipment and Software for
(i)Synthesis laboratory ii) Simulation laboratory for Nanotechnology program.
For
specifications and details, visit www.jntuk.edu.in. Last date for receipt of tenders is 07.05.2013.
Registrar
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA – 533 003. Andhra Pradesh
TENDER NOTICE
Tender Notice No. JNTUK/IST/NT/Lab Equipment
Dated 18-04-2013
Sealed Tenders are invited from reputed Manufacturers/ Suppliers for the supply of the
listed items. The detailed specifications, terms & Conditions for the items can be downloaded
from the jntuk.edu.in. The sealed tenders should reach the undersigned on or before 5.00 pm
on 07.05.2013.
JNTUK reserves the right to accept or reject any or all bids without assigning any reason
whatsoever.
Registrar
List of equipment and specifications:
SNO
Name of the Equipment & Brief specifications
Spin coating unit
1. 250mm Dia
1 2. Control system :
3. Indications
:
4. Control switches:
5. Motor
:
6. Drive
:
7. Speed RPM :
8. Vacuum level :
9. Vacuum pump
10. Sample size
2
Quantity
1
EMD
IN RS.
2000
1
2500
Through Variable frequency drive
Digital RPM indicator
Mains on, Drive on & Vacuum pump on
0.25HP 3 phase
Belt drive
Adjustable 100 – 5000 RPM
760mm mercury
:
Rotary vacuum pump(inbuilt)
: 25mmX25mm
Spray pyrolysis
3kW, Furnace temperature, 10000C, work area 200 x 200 mm,
spraying rate 1 litre/hr, Air compressor, Control switches
3
1
Hydraulic press
Capacity of the press :
20 tons
Capacity of the cylinder:
20 Tons (Max) (hydraulic power
unit)
Usage
:
Powder pressing
Piston stroke :
75mm
Distance between Punch and die
:
100 mm
Size of the platen:
100mm dia
Press frame :
2-pillar type
Pressure gauge
Digital Pressure gauge:Max Pressure
:
300 bars
Dimensions : 500x500x800mm
Dies
:
10, 16, 25 and 40 mm dia
Die compaction
:
Automatic by motorized power pack
5000
4
Ultrasoincater
To disperse nanoceramic particles into the molten metal.
Frequency approximately 200Hz
1
6000
5
MiniDistilation Plant
Boiling Flask Sizes:50,100,250,500,1000ml
Distillation column:8mm Diameter
Circulating bath: -20-1000C
Dimensions: 225cm*21cm*21cm (H*D*L)
Power :220 VAC,50/60 Hz
1
2000
Micro Furnace(1800°c)1800⁰C
1
5000
6
Electrical Resistance
7
Mini Shaker (Magnetic Stirrer)
Magnetic stirrer
Weight:45.00 lbs
Exterior Dimensions W*D*H in.(cm):11.3*15.8*11.5
(28.6*40.1*29.3)
Platform Dimensions:9.5*11.5(23.5*29.2)
Temperature Range: Ambient +5 to 600C
Temperature Uniformity:+/- .25%
Electrical Specifications:120 or 230 V,50-60Hz, 200W
Oscillation Rate:30 to 400rpm
1
2000
8
Polymer Chain Reaction
Capacity 96*0.2ml,54*0.5ml, 384ell, 96*0.2ml+77*0.5ml
Temp Range 0-990(RT≤300)
Heating rate ≥4.00/s
Accuracy ≤ ±0.27 Gradient temp range 30˜99degees
Gradient Spread 30degrees
1
2000
9
Weighing Balance
Capacity :200gm
Readability :0.01 gm
Pan Size (mm) :125MM
Net Weight 1.8Kg approx.
Raman Spectroscopy
Wave length range: 200 – 800 nm(monochromator)
Wavelength accuracy <=0.4nm
Reciprocal of Linear dispersion- 2.7mm
1
3000
1
20000
10
11
Ball Mill
Ball mill (Wet as well as Dry), Tungsten Carbide balls, Volume of
the jar :
1
7000
250 ml
Maximum load100 grams
Minimum load:10 grams
Maximum Speed:
100 to 650 RPM (Variable)
12
Electrophoresis with power Pack
Gel Dimensions (w*l)…………6*7.5cm
Maximum Buffer Volume…….325 ml
Maximum Power Settings……..300v,200ml,60W
1
2000
13
1
Mini CVD
1400C, Shell size and useful volume
:
600 x 600 x
600 mm and 200 x 60 mm
1
Sputtering Unit
N type electrical connector
-Aluminum ground shield /ISO 200 mounting flange and captured
Viton O-ring
-30 mm insertion length from flange seal surface to end of source
parts
-10 mm OD ,1m long water lines supplied with source
-6 mm Swage lock as fitting on atmosphere side of mounting flange
1
Particle Size Analyzer
Measurement range - 10nm to 300um
6000
14
15
16
17
18
Carbon nano tubes and other nano particles
Sizes of Carbon nano tubes- 5,10,15,20nm
SiC- 5,10,15,20nm
TiC-5,10,15nm
Al2O3-5,10,15nm
Purity - 99.9%
ARGUS Software
For atomic and molecular simulation, No. of Users: 30
MOSES Software
For analyzing transistor characteristics, No. of Users: 30
10000
50000
5000
15000
15000
Terms and Conditions:














The sealed tenders, mentioning clearly “Nano Technology Lab Equipment” on the
cover along with the Tender No., Name of equipment, should be addressed and delivered
to:
The Registrar
JNTUK, Kakinada
Kakinada – 533 003
Andhra Pradesh
Separate tenders should be submitted for each equipment as per the specifications
mentioning the additional features, if any.
The completely filed in tender documents must reach the Registrar, JNTUK, Kakinada,
on or before 07.05.2013, 5.00 pm.
The tender will be opened on 16.05.2013 at 14:30 hrs by the undersigned/his nominee
in the presence of the committee members and available tenderers or their
representatives.
The JNTUK, Kakinada reserves the right either to select or reject certain terms (single or
multiple units) in the schedule without assigning any reasons whatsoever.
Incomplete tenders, amendments and additions to tenders after opening or late tenders are
liable to be ignored, and rejected
The tenderer shall be responsible for the delivery of the material, its successful
demonstration, and onsite training.
A Demand Draft for Rs.1,000/- (Rupees One Thousand Only) drawn in favour of the
“Registrar, JNTUK, Kakinada” towards application fee (nonrefundable) must
accompany the tender(s) from each tenderer.
A Demand Draft for an amount, as specified for each equipment, drawn in favour of the
“Registrar, JNTUK, Kakinada” towards refundable EMD must also accompany the
tender. The tender without EMD will be rejected. The EMD for the unsuccessful
tenderers will be refunded.
JNTUK, Kainada has been registered with DSIR, GOI and exempted from customs and
central excise.
The prices should be inclusive of packing, forwarding, insurance, delivery at destination
site and all taxes(FOR Kakinada).
The tenders should be valid for acceptance up to a period of 3 months. The tenderers
should be ready to extend the validity, if required.
Tenderer should enclose their offers with full details of equipment with full
documentation / descriptive literature / leaflets indicating special features of their
equipment or systems.
Tenders submitted after due date/time will not be considered and no intimation will be
sent in this regard.





The Registrar, JNTUK, Kakinada does not bind himself to accept the lowest bid on any
tender and reserves the right of accepting the whole or any part of the tender or portion
of the quantity offered and the tenderer shall supply the same at the rate quoted.
Acceptance of the tender shall be communicated by letter of acceptance or formal
acceptance of the tender to the successful tenderer.
Any specific queries, communications, and references should be made only to, The
Registrar, JNTUK, Kakinada.
The Tenderer should produce copy of service Tax Certificate and PAN Card.
All Tenderers should give a warranty declaration as detailed below:
1. We shall abide by all the specifications, terms and conditions listed in the tender
Notice and tender documents.
2. We warrant that everything to be supplied by us hereunder shall be free from all
defects and faults in material, workmanship and shall be of the highest quality and
material of the type ordered, shall be in full conformity with the specifications.
3. Any deviations in the material and/or the specifications from the accepted terms are
liable to be rejected and the tenders need to supply all the goods in the specified form
to the satisfaction/specifications specified in the order/contract and demonstrated at
their own cost.
Sd/- REGISTRAR