1L6P = S-106 NEW
INDEX
1. GENERAL
GENERAL...............................................................................
2
2. INSTALLATION
BEFORE THE INSTALLATION.............................................................
2
TO INSTALL THE SYSTEM...............................................................
2
NOTE BEFORE UDING...................................................................
2
3. OPERATING GUIDE
OPERATING GUIDE.....................................................................
3
PROGRAM TABLE.......................................................................
3
4. EXTENSION USER'S GUIDE
TO MAKE AN INTERNAL CALL............................................................
4
TO MAKE AN EXTERNAL CALL............................................................
4
HOLD AND HOLD RETRIEVE..............................................................
4
CALL TRANSFER.......................................................................
5
CONFERENCE..........................................................................
6
DO NOT DISTURB......................................................................
FAX SIGNAL DETECTION................................................................
RINGING ASSIGNMENT EXTENSION..................................................
6
6
6
DOOR PHONE..........................................................................
TO USE
“**” INSTEAD OF “FLASH/HOOKING”......................................
7
7
FLASH TIME..........................................................................
7
TRUNK ACCESS CODE...................................................................
7
TRUNK ACCESS CODE...................................................................
7
PROGRAM PASSWORD....................................................................
8
TOLL RESTRICTION EXTENSION TO GROUP ALLOCATION......................... 8
RESTRICTION CODE....................................................................
8
REDIAL..............................................................................
8
MEMORIES DIAL.......................................................................
9
POWER FAILURE.......................................................................
9
5. TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS.........................................................
9
6. TONE KINDS AND CADENCE
TONE KINDS AND CADENCE...........................................................
10
S-106
1. GENERAL
SIZE(mm) AND WEIGHT(Kg)
SIZE(m/m)
WEIGHT(KGW)
POWER
225(L)*225(W)*45(H)
1.0 KGW
VAC 220V/50HZ 10W
2. INSTALLATION
＊ PLEASE READ THIS OPERATING GUIDE CAREFULLY BEFORE INSTALLING YOUR TELEPHONE EXCHANGE.
BEFORE THE INSTALLATION
LOCATE THE SYSTEM
·DO NOT EXPOSE THE EQUIPMENT TO DIRECT SUNLIGHT.DO NOT PLACE NEAR SOURCES OF
HEAT,SUCH AS A RADIATOR.
·DO NOT EXPOSE THE EQUIPMENT TO RAIN OR MOISTURE.
·NEAR TO INCOMING LINES POINT OF DEMARCATION, AS POSSIBLE.
·NEAR THE CENTRAL POSITION OF ALL THE EXTENSIONS.
·POWER SOURCE SHOULD NOT BE THE SAME AS THAT USED FOR OTHER EQUIPMENT WITH
HIGH ELECTRICAL CONSUMPTION.
·KEEP AWAY FROM EQUIPMENT THAT EMITS HIGH ELECTRICAL NOISE.
TO INSTALL THE SYSTEM
1. CHECK TO MAKE SURE THAT THE AVAILABLE ELECTRICAL POWER, AND PLUG IN.
2. DISCONNECT THE POWER, AND START WIRING WITH TWO-WIRE REGULAR TELEPHONE CABLE.
3. PLUG IN THE AC POWER AGAIN.
NOTE BEFORE USING
● PHONES REQUIREMENTS
1. IF THE PHONE IS IN THE HOOK-ON STATE, THE RESISTANCE SHOULD NOT BE LOWER THAN 39K
OHMS.
2. IF THE PHONE IS IN THE HOOK-OFF STATE, THE RESISTANCE SHOULD BE BETWEEN 100 AND
600 OHMS.
3. SET THE CONNECTED PHONES IN THE TONE MODE ( DTMF MODE )
● PHONE AND WIRING TEST
1.
2.
3.
4.
5.
PICK UP THE HANDSET OF EXT.1, YOU WILL HEAR THE INTERNAL DIAL TONE OF THE S-106.
DIAL "2" AND EXT.2 WILL RINGING.
PICK UP THE HANDSET OF EXT.2 AND CHECK THE CONNECTION.
HANG UP BOTH HANDSETS.
REPEAT THIS PROCEDURE FOR THE OTHER TELEPHONE (EXT.3、EXT.4、EXT.5、EXT.6).
● EXTERNAL LINE TEST
1.
2.
3.
4.
PICK UP THE HANDSET OF EXT.1, YOU WILL HEAR THE INTERNAL DIAL TONE OF THE S-106.
DIAL "0", FOR THE EXTERNAL LINE, NOW, YOU WILL HEAR THE EXTERNAL LINE DIAL TONE.
DIAL A TELEPHONE NUMBER AS A TEST.
ALSO TEST THE EXTERNAL LINE CONNECTION WITH THE OTHER PHONES.
-3-
3. OPERATING GUIDE
● OPERATING GUIDE
1 : EXTENSION 1
2 : EXTENSION 2
3 : EXTENSION 3
4 : EXTENSION 4
5 : EXTENSION 5
6 : EXTENSION 6
81 : DO NOT DISTURB ON
80 : DO NOT DISTURB OFF
0 : TRUNK LINE ACCESS CODE
● PROGRAM TABLE
FUNCTION
100 MEMORY RESET
11 FAX SINGNAL DETECT
0
12
RING ASSIGNMENT EXTENSION
0
13
DOORPHONE
0
14
1
15
TO USE “**” INSTEAD OF
“FLASH/HOOKING”
FLASH TIME
16
TRUNK ACCESS CODE
0
17
21
PROGRAM PASSWORD
TOLL RESTRICTION- EXTENSION 1
TO GROUP ALLOCATION
TOLL RESTRICTION- EXTENSION 2
TO GROUP ALLOCATION
TOLL RESTRICTION- EXTENSION 3
TO GROUP ALLOCATIO
TOLL RESTRICTION- EXTENSION 4
TO GROUP ALLOCATION
TOLL RESTRICTION- EXTENSION 5
TO GROUP ALLOCATION
TOLL RESTRICTION- EXTENSION 6
TO GROUP ALLOCATION
GROUP 1 RESTRICTION CODE A
:
GROUP 1 RESTRICTION CODE H
GROUP 2 RESTRICTION CODE A
:
GROUP 2 RESTRICTION CODE H
7890
0
22
23
24
25
26
31
:
38
41
:
48
DEFAULT
REMARK
0: NO FAX MACHINE
1～6 : FAX MACHINE ON EXTENSION 1～6
0: NO RING ASSIGNMENT EXTENSION
1～6 : RING ASSIGNMENT EXTENSION 1～6
0: NO DOORPHONE
1～6 : DOORPHONE ON EXTENSION 1～6
0: “FLASH/HOOKING”
1: “**”
0 : 140 ～640 ms 1 : 80 ～260 ms
2 : 160 ～340 ms
3 : 240 ～420 ms 4 : 320 ～500 ms 5 : 400 ～580 ms
6 : 480 ～660 ms
0
0
0
0
0
0
EMPTY
:
EMPTY
EMPTY
:
EMPTY
0 : TRUNK ACCESS CODE = 0
9 : TRUNK ACCESS CODE = 9
NECESSARY 4 DIGIT
0 : No Restriction
1 : Group Allocation 1
2 : Group Allocation 2
0 : No Restriction
1 : Group Allocation 1
2 : Group Allocation 2
0 : No Restriction
1 : Group Allocation 1
2 : Group Allocation 2
0 : No Restriction
1 : Group Allocation 1
2 : Group Allocation 2
0 : No Restriction
1 : Group Allocation 1
2 : Group Allocation 2
0 : No Restriction
1 : Group Allocation 1
2 : Group Allocation 2
1→2 DIGITS
:
1→2 DIGITS
1→2 DIGITS
:
1→2 DIGITS
-4-
4. EXTENSION USER'S GUIDE
D.T
S.D.T
B.T
N.T
R.B.T
: DIAL TONE
: SECOND DIAL TONE
: BUSY TONE
: NOTICE TONE
: RING-BACK TONE
TO MAKE AN INTERNAL CALL
【OFF HOOK】─→【EXTENSION NUMBER (1 ～ 6)】
(D.T ON)
*(D.T OFF)
(R.B.T ON)
(EXT. RING ON)
TO MAKE AN EXTERNAL CALL
【OFF HOOK】─→【 0 】───→【GET TRUNK LINE】
(D.T ON)
*(D.T OFF)
(EXTERNAL D.T ON)
(1) TIMING BETWEEN DIALING DIGITS IS LIMITED IN 10 SECONDS.
(2) IF YOU PICK UP HANDSET WITHOUT DIALING ANY NUMBER AFTER 10
SECONDS, YOU WILL GET BUSY TONE.
HOLD (ONLY FOR EXTERNAL CALL) AND HOLD RETRIEVE
● HOLD
【EXT. THAT IN USING】─┬→【HOOKING/FLASH】 ─┬→【ON HOOK】
└→【 ** 】─────────┘ *(D.T OFF)
(D.T ON)
(EXTERNAL MUSIC ON)
(1) IF THE HELD CALL IS NOT RETRIEVED WITHIN 20 SECONDS, THE SYSTEM
WILL GIVE A HOLD RECALL TO THE EXTENSION INITIATING THE HOLD,
IF STILL NO ANSWER AFTER 40 SECONDS,IT WILL BE DISCONNECTED
AUTOMATICALLY.
(2) INTERCOM CAN NOT BE HOLD.
(3) EXTERNAL WILL GET MUSIC, IF STILL NO HOLD RETRIEVE AFTER 60
SECONDS,IT WILL BE DISCONNECTED AUTOMATICALLY.
● HOLD RETRIEVE
【OFF HOOK】─→【HOOKING/FLASH】
【OFF HOOK】─→【0】
(1) WHEN EXTENSION IN BUSY MODE, IT CANNOT MAKE HOLD RETRIEVE.
-5-
CALL TRANSFER
【EXT. THAT IN USING】┬→【HOOKING/FLASH】┬→【EXT. NO.】→【ON HOOK】
└→【 ** 】
─────┘ *(D.T OFF)
(R.B.T OFF)
(D.T ON)
(R.B.T ON)
(EXTERNAL MUSIC ON) (INTERNAL RING ON)
1. THE HOLD INITIATING PARTY CAN RETRIEVE THE HELD CALL BY PRESSING
"FLASH" KEY OR TAPPING SWITCH HOOK AS IN "HOLD RETRIEVE"OPERATION.
2. IF THE CALL THAT IS TRANSFERED IS NOT ANSWERED WITHIN 20 SECONDS,
THE CALL WILL RING BACK TO THE INITIATING EXT.
3. WHEN TRANSFER A CALL, IF YOU DIAL THE NBR. WHICH ISN'T EXT. NBR. OR IF
THE EXT. IS IN BUSY, THE SYSTEM WILL RING BACK WITHIN 20 SECONDS
AFTER YOU HANG ON THE HANDSET.
4. IF THE TRANSFERRED EXT. IS IN BUSY:
A. EXT. A ON C.O. LINE ─ PRESS "FLASH" TO HOLD IT ─ DIAL EXT. B ─
EXT. A GETS BUSY TONE ─ EXT. A PRESS "FLASH" ─
EXT. A GET BACK THE CALL
B. EXT. A ON C.O. LINE ─ PRESS “**” TO HOLD IT ─ DIAL EXT. B ─
EXT. A GETS BUSY TONE ─ EXT. A ON HOOK ─ EXT. A OFF HOOK ─
PRESS “0” ─GET BACK THE CALL
5. IF THE TRANSFERRED EXT. IS NO ANSWER:
A. EXT. A ON C.O. LINE ─ PRESS "FLASH" OR “**” TO HOLD IT ─ DIAL EXT. B─
EXT. B IS RINGING BUT NO ANSWER ─ EXT. A PRESS "FLASH" ─
EXT. A GETS BACK THE CALL
B. IF THE TRANSFERRED EXT. IS NO ANSWER:
EXT. A ON C.O. LINE ─ PRESS “**” TO HOLD IT ─ DIAL EXT. B ─
EXT. B IS RINGING BUT NO ANSWER ─ EXT. A ON HOOK ─
EXT. A OFF HOOK ─ PRESS “0” ─GET BACK THE CALL
6. IF THE TRANSFERRED EXT. DOES NOT WANT TO GET THE TRANSFERRED CALL:
A. EXT. A ON C.O. LINE ─ PRESS "FLASH" TO HOLD IT ─ DIAL EXT. B─
EXT. B PICK UP ─ EXT. A TALK WITH EXT. B ABOUT THE CALL, BUT
EXT.B DO NOT WANT TO RECEIVE IT ─ EXT. B HANG ON ─ EXT. A GETS
BUSY TONE ─ EXT. A PRESS "FLASH" TO GET BACK THE CALL
B. EXT. A ON C.O. LINE ─ PRESS "FLASH" OR “**” TO HOLD IT ─ DIAL EXT. ─
EXT. B PICK UP ─ EXT. A TALK WITH EXT. B ABOUT THE CALL, BUT
EXT.B DO NOT WANT TO RECEIVE IT ─ EXT. B HANG ON ─
EXT. A GETSBUSY TONE ─ EXT. A ON HOOK ─
EXT. A OFF HOOK ─ PRESS “0” ─GET BACK THE CALL
-6-
CONFERENCE
● 1 EXTERNAL & 2 INTERNAL
(WITH EXTERNAL)
(2ST CALLED)
【EXT. THAT IN USING】┬→【HOOKING/FLASH】┬→【EXT. NO.】→
└→【 ** 】 ───────┘ *(D.T OFF)
(D.T ON)
(R.B.T ON)
(EXTERNAL MUSIC ON)
(2ST CALLED RING ON)
【OFF HOOK】────┬→【HOOKING/FLASH】─┬→ [CONFERENCE]
(R.B.T OFF)
└→【 ** 】 ────────┘
(2ST CALLED RING OFF) (EXTERNAL MUSIC OFF)
DO NOT DISTURB
【OFF HOOK】─→【 8 】────┬→【 1 】─┬→【ON HOOK】
(D.T ON)
*(D.T OFF) └→【 0 】─┘ *(D.T OFF)
*(D.T ON)
1. 1: PROGRAMMED FOR "DND".
0: CANCELLED
3. WHEN THE EXTENSION IS IN "DND"MODE, ONCE THE HANDSET IS PICKED UP,
THE EXTENSION USER WILL HEAR A "NOTICE TONE".
FAX SIGNAL DETECTION
●
Off Hook - *7890 ---- 11 -------- N--------- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N = 0: NO FAX MACHINE
1 / 6 : FAX MACHINE ON EXTENSION 1 / 6
1. WHEN ASSIGN FOR FAX EXT, ANY INCOMING THROUGH THIS TRUNK, THE
SYSTEM SHALL DETECT FAX "CNG" SIGNAL FIRST (MAXIMUM 8 SECONDS).
2. IF IT DETECTS FAX "CNG" SIGNAL, THE CALL SHALL BE TRANSFERRED
AUTOMATICALLY TO FAX EXT. OTHERWISE, THE CALL SHALL BE TRANSFERRED
AUTOMATICALLY TO BE NORMAL
RINGING ASSIGNMENT EXTENSION
●
Off Hook - *7890 ---- 12 -------- N--------- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N = 0: NO RING ASSIGNMEMT EXTENSION
1 / 6 : RING ASSIGNMEMT ON EXTENSION 1 / 6
1. DOOR PHONE AND FAX : CAN’T SET-UP AS RING ASSIGNMENT
-7-
DOOR PHONE
●
Off Hook - *7890 ---- 13 -------- N--------- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N = 0: NO DOORPHONE
1 / 6 : DOORPHONE ON EXTENSION 1 / 6
● CALL FROM DOOR PHONE
【(VISITOR) PUSH THE BUTTON (DOOR PHONE)】→【RING TO RING ASSIGNED EXTENSION】
(1) THIS DOOR PHONE CALL RINGING WILL OVERRIDE "DND" MODE.
(2) THE RING WILL BE STOPPED IF IT IS NOT ANSWERED WITHIN 30 SECONDS.
(3) ONLY "S-106" DOORPHONE CAN BE CONNECTED.
● CALL TO DOOR PHONE
【OFF HOOK】→【 DOORPHONE EXT.NO. 】→【DOORPHONE AUTOMATIC ANSWER】→【TALKING】
(D.T ON)
*(D.T OFF)
TO USE “**” INSTEAD OF “FLASH/HOOKING”
●
Off Hook - *7890 ---- 14 -------- N--------- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N = 0 : “FLASH/HOOKING”
1 : “**”
FLASH TIME
●
Off Hook - *7890 ---- 15 -------- N--------- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N=
0: 140 / 640 ms
1: 80 / 260 ms
2: 160 / 340 ms
3: 240 / 420 ms
4: 320 / 500 ms
5: 400 / 580 ms
6: 480 / 660 ms
TRUNK ACCESS CODE
●
Off Hook - *7890 ---- 16 -------- N--------- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N = 0 : TRUNK ACCESS CODE = 0
9 : TRUNK ACCESS CODE = 9
-8PROGRAM PASSWORD
●
Off Hook - *7890 ---- 17 ------- NEW PROGRAM PASSWORD --- On Hook
D.T ON
D.T OFF
S.D.T OFF S.D.T OFF
D.T OFF
S.D.T ON
S.D.T ON
D.T ON
N0TE : NECESSARY 4 DIGIT
T0LL RESTRICTION EXTENSION TO GROUP ALLOCATION
●
Off Hook - *7890 ---- NN ------- X --------- On Hook
D.T ON
D.T OFF
S.D.T OFF S.D.T OFF
D.T OFF
S.D.T ON
S.D.T ON
D.T ON
NN = 21 / 26, EXTENSION 1 / 6
X = 0: No Restriction
1: Group Allocation 1
2: Group Allocation 2
RESTRICTION CODE
●
Off Hook - *7890 ---- NN ------- RESTRICTION CODE --- On Hook
D.T ON
D.T OFF
S.D.T OFF
S.D.T OFF
D.T OFF
S.D.T ON
S.D.T ON
D.T ON
NN = 31 / 38, FOR GROUP 1 RESTRICTION CODE
NN = 41 / 48, FOR GROUP 2 RESTRICTION CODE
PS: RESTRICTION CODE MAXIMUM CAN BE WITH 2 DIGITS, IF LESS THEN 2 DIGITS, PLEASE ADD ‘*’ AT LAST CODE.
REDIAL
【OFF HOOK】→【PRESS TELEPHONE R/D BUTTON】→【GET TRUNK AND REDIAL LAST NUMBER】
1. IF YOUR TELEPHONE IS EQUIPPED WITH A REDIAL BUTTON,
KEEP IN MIND A POSSIBLE PAUSE
WHEN YOU HAVE DIALLED THE EXTERNAL LINE ACCESS CODE "0".
IF YOUR PHONE HAS A PAUSE FUNCTION, PUSH THE PAUSE BUTTON ONCE
AFTER THE FIRST "0", BEFORE DIALLING THE TELEPHONE NUMBER.
THE PAUSE COMMED WILL BE STORED IN THE LAST NUMBER REDIAL FUNCTION.
EXAMPLE : 0P2183353
4. IF YOUR PHONE IS NOT EQUIPPED WITH A PAUSE BUTTON, THE REDIALLING
MIGHT GO TOO FAST.
- 9-
MEMORIES DIAL
1. IF YOUR TELEPHONE IS EQUIPPED WITH MEMORIES, PROGRAM AS FIRST
NUMBER "0" (FOR THE
EXTERNAL LINE) FOLLOWED BY A PAUSE, AFTER WHICH YOU CAN DIAL THE
PHONE NUMBER.
EXAMPLE : 0P2183353
2. A MEMORY DIALER CAN BE CONNECTED IN THE SAME WAY AS A NORMAL
TELEPHONE. NOTE THAT THE
MEMORY NUMBERS SHOULD BEGIN WITH A "0", FOLLOWED BY A PAUSE, TO
GET ACCESS TO THE
EXTERNAL LINE. EXAMPLE : 0P2183353
POWER FAILURE
1. IN CASE OF A POWER FAILURE, EXT.2 WILL DIRECTLY BE CONNECTED TO THE PUBLIC
TELEPHONE LINE.
5. TECHNICAL SPECIFICATIONS
POWER SUPPLY
: 220VAC ± 5﹪
POWER CONSUMPTION
: 10W
AMBIENT TEMPERATURE
: 0℃ ～ 50℃
RELATIVE HUMIDITY
: 15﹪～ 95﹪
DIMENSIONS
: 225(L)*225(W)*45(H)
WEIGHT
: 1.0 KGW
INTERNAL VOLTAGE
: 32VDC
RINGING SIGNAL
: 60VAC , 50HZ
DURING POWER FAILURE
: EXTERNAL LINE → EXTENSION 2
MAX. DISTANCE TO EXTENSION : 200 METER (MAX. CABLE RESISTANCE 60 Ω)
MAX. CURRENT ON EXTENSION : 40 mA
TRANSMISSION LOSS
: < 1 dB
CROSSTALK ATTENUATION
: > 80 dB
IDLE CHANNEL NOISE
: < -70 dBm
THE FEATURES DESCRIBED IN THIS MANUAL ARE PUBLISHED WITH
RESERVATION TO MODIFICATIONS.
- 10 -
6. TONE KINDS AND CADENCE
1. Intercom Dial Tone ─ ─ ─ 400HZ
┌ ─ ─ ─ ─ ─ ─
...
┘
2. Busy Tone ─ ─ ─ 500HZ
┌ ─ ┐ .5┌ ─ ┐ . . .
3. Ring Back Tone ─ ─ ─ 500HZ
┌─ ─ ┐
2
┘ .5└ ─ ┘
└ ─
┌ ─ ─ ┐ ...
┘ 1 └ ─ ─ ──┘
└
4. Second Dial Tone ─ ─ ─ 400HZ
5. Notice Tone ─ ─ ─ 400HZ ┌ ┐
┘ └── ────┘└
.1
┌ ┐ ┌ ┐ ┌ ┐ ┌ ┐ ...
1.9
┌ ┐
1.9
┘ └ ┘ └ ┘ └ ┘ └
┌ ┐ ...
.2 .2
┘ └ ─ ─ ────
.1
5. Hold Music
6. Ringing ─ ─ ─ 50HZ
─ ─┘
└
┌ ─ ─ ┐
2
┌ ─ ─ ┐ ...
1,2,3,4,5,6
┘ 1 └──