AAF – Filtre fine – F5 – F9
AmerTex® F-Serie
High Efficiency Filter Media
l Three versions available:F30, F55 and F60
l For paintspray and drying booth applications
l Fine synthetic fibres
l Multi-layered structure
EN 779 classification F5 - fire retardant, F1/K1 - DIN 53438.
Application: AmerTex F-series media are used in applications
in which fine filtration on particulate matter is required. For
example, F30 "Fine" medium can be used in a paintspray cabin, a
drying booth, or used as a prefilter to a HEPA filter. For
applications that require a higher level of air cleanliness, either the
F55 "Superfine" or the F60 "Superfine Scrim" is recommended.
AmAir® 500 GT
Prefilter for Rotating Machinery
l Prefilter for turbine barrier filter
l Beverage board for highest moisture
resistance
l Extend life of final filter
EN 779 classification F5
BioCel® M-Pak
Low Depth Hepa Filter for Industrial HVAC Systemsl
Space saving design
l Lightweight - Filter class H10 - EN1822
l Non corrosive - Fully incinerable
When installation space is limited and high quality air filtration is
required, BioCel® M-Pak is the ideal filter. This filter offers
OEM’s the opportunity to minimize the space requirement of their
air handling units and reduce costs.
As a H10 EN1822 classified filter, BioCel® M-Pak can be used to
upgrade an existing HVAC installation to a HEPA installation.
The filter is also suitable for use in existing installations such as
VAV or in systems typified by repeated fan shut down, turbulent
airflow, side access or high relative humidity.
Dihedral - VariCel
®
Biocel ® AstroCel ®
• Available in F9 to EN779:2002
H11, H13 and H14 to EN1822
• Non corrosive • Fully incinerable
• Low resistance – long service life
These filters are used as prefilter or main filter in industrial
and commercial HVAC installations. In Laminar Flow
Cabinets the Dihedral is the perfect solution.
The filter is available in three different sizes;
- two sizes both with a different front size and a depth of 600
mm for large volumes.
- one with a depth 202 mm for applications with small build
in depth.
DriPak® 2000 and 2000 Intersept
l Filter classes F5 - F8 to EN:2002
l Mechanically strong with high abrasional resistance
l Operational reliability in high airflow and high dust loading
conditions
l Excellent performance in high relative humidity
l All polymer construction: fully incinerable
Since their introduction they have proven a resounding success
with the comfort, pharmaceutical, food processing and automotive
industries.
DriPak® Composite
_ Heavy industrial applications
_ Long lifetime_ High dust holding capacity
_ Four efficiencies: F5 to F8
_ High burst pressure
_ Available in high efficiency glass and synthetic media
The burst pressure for this filter is 2500 Pa.
DriPak filters are tested in accordance with EN779. The
recommended final resistance is 650 Pa.
DriPak GF®
Ultrafine Glass Fibre Media for High Quality Air Filtration
l Filter classes F5 - F8 meet the clean air requirements
of numerous industrial and commercial applications
l Low resistance to airflow
l High dust holding capacity and long service life
l Outstanding performance in difficult operation conditions
DriPak filters are tested in accordance with EN779.
The recommended final resistance is 450 Pa.
DriPak® IP
High Efficiency Incinerable Pocket Filter
l Fully incinerable with no emission of toxic gases
l Utilizes non-corrosive materials
l Available in both synthetic and fibre glass media
l Available in efficiency ranges from G4 to F8 - EN779.
DuraCel® RM60 & RM90
High Efficiency Barrier Filter For Rotating Machinery
● High efficiency
● High dust holding capacity
● Economical in use
● High blow-out pressure
Application
DuraCel RM is a heavy duty, high efficiency filter designed for
use with centrifugal compressors and gas turbines where severe
surging and pulsation occur.
Two versions are available:RM-60 and RM-90.
The filtering efficiency of the RM-90 is in excess of 99% by the
weight test method; the filtering efficiency of the RM-60 is 98%
by the weight test method.
DuraCel® XL60 & XL90
High Efficiency Barrier Filter For Rotating Machinery
● High efficiency and dust holding capacity
● Lightweight, easy to install
● Low average operating resistance
● Longer life than standard filters
DuraCel XL can handle air volumes up to 4250 m3/h while still
offering high dust holding capacity and high efficiency.
DuraCel® XN95 & XN98
High Efficiency Barrier Filter for Rotating Machinery
● High efficiency and dust holding capacity
● Lightweight, easy to install
● Low average operating resistance
● Longer life than standard filters
DuraCel XN95 and XN98 can handle air volumes up to 5100 m3/h
while still offering high dust holding capacity and high efficiency.
Average Arrestance on AC Fine Test Dust – 100 (%)
DuraCel® XW98
High Efficiency Barrier Filter for Rotating Machinery
● High efficiency and dust holding capacity
● Lightweight, easy to install
● Low average operating resistance
● Longer life than standard filters
DuraCel XW98 can handle air volumes up to 5100 m3/h while still
offering high dust holding capacity and high efficiency.
Average Arrestance on AC Fine Test Dust – 100 (%)
DuraPulse® Cartridge
High Efficiency Cartridge Filter
l Self-cleaning pulse-type applications
l Heavy-duty construction
l Operational under severe environmental conditions
l High efficiency performance
Nominal Air Flow: 300 - 600 cfm (500 - 1000 m3/h)
Recommended Face Velocity: 2.5 - 3 fpm (0.0125 - 0.015 m/s)
Initial Resistance: 0.6'' - 1.1'' W.G. (150 - 280 Pa)
Average Arrestance (by weight):
99.95% on AC Coarse Test Dust
99.61% on AC Fine Test Dust
DuraVee® HXL
High Capacity, High Efficiency Barrier Filter for Rotating
Machinery
• High efficiency and dust holding capacity
• Extended media area
• Water resistant media
• Sturdy construction
• Full polymer construction
• Fully incinerable
• Free of halogens
Filter class EN779 / EN1822:1) F6; F7; F8; F9; H10
DuraVee® XL
High Efficiency Barrier Filter for Rotating Machinery
l High efficiency and dust
holding capacity
l Water resistant media
l Extended media area
l Sturdy construction
l Fully Incinerable
Filter Class EN1822 / EN779 2 : F6; F7; F8; F9; H10
FlexPak® FA-series
Extended surface air filters supported pocket type
l Directly interchangeable
l Minimum storage space due to pre-folded pocket design
l Rigid construction
l Available in three efficiencies: 50, 80 and 90%
FlexPak filters are economical replacement filters for air intake
systems for engines, compressors and gas turbines as
well as for HVAC systems in commercial, industrial, institutional
and other types of buildings.
Pre-folded pockets result in compact packaging, less storage space,
lower freight costs.
Hydrocel 95 & H12
solver the problem of
excess salt solution wich is
essential for the protection
against turbine blade
Fouling & Corrosion.
With this product,
continuous turbine
operation with only one or
two water wash cycles /
year can be achieved.
Refined Filtration
Against salt & seawater
NetPLy® and ChevroNet®
Lightweight pleated filters for HVAC systems
_ High air cleaning performance as prefilter or main filter
_ High dust holding capacity and long service life
_ Choice of media in the classification range G2 to F5
_ Lightweight and easy to install
! As prefilters, NetPly and ChevroNet protect more
expensive main filters from premature replacement while as
main filters they improve the quality of indoor air
VariCel®
High Efficiency Compact Filter for Quality HVAC
Systems
● Designed for difficult operating conditions
● High airflow capacity: 3400 m3/h
● Cost saving design
● Classification ranges F6, F7 and F8 in accordance to EN779
VariCel V
Lightweight Compact Filters For Commercial and
Industrial HVAC Systems
l Lightweight and easy to install
l Classification ranges F6, F7, F8 and F9
l Excellent performance in difficult operating
conditions
l High air volume capacity: upto 5000 m3/h
l High dust holding capacity
It is used in variable air volume systems and subjected to repeated
fan shutdown, high relative humidity and intermittent exposure to
water.
VariCel® HT
High Temperature Compact Filter for the Automotive
Industry
● Improves air quality in drying lines
● High temperature operation: 260°C - 480°C
● Robust, heat resistant aluminized materials
● Classification ranges F6, F7 and F8
● Silicon free construction
VariCel® II HT
High Temperature Air Filter for Drying Tunnel
Installations
l Operating temperature of 385ºC
l Filter classifications F6 and F8 to EN779:2002
l Final resistance: 450 Pa
l Silicon free construction
l Extruded aluminium cell sides with glass fibre media
l Recycle / disposal friendly
VariCel® II&with INTERSEPT®
Low Depth Compact Filter
for Commercial and Industrial HVAC Systems
● Low depth saves space
● Classification ranges F6, F7 and F8
● Lightweight and easy-to-install
● Economic to transport
● High dust holding capacity
● Intersept® inhibits the growth of fungi and bacteria
● Intersept® controls microbial odours
● Intersept® preserves filter media throughout its service life
● 4” depth reduces space requirement
● Excellent performance in humid operating conditions
● Improves IAQ
VariPak®
Multi-Purpose High Efficiency Compact Filter
l For use as prefilter or fine filter
l F6, F7 and F8 classified according to EN779
l Various media pack depths and cell side combinations
available
l Low resistance = long service life
l Maximum operating temperature 70°C
VariCel® VXL
High Efficiency Compact Filter for HVAC Systems
l Classification F6, F7, F8 and F9 to EN779:2002
l Excellent performance in difficult operating conditions
l High capacity: 3000 to 5000 m3/h
l Lightweight and easy to install
l Fully Incinerable
VariSorb® VS Carbon Filter
Carbon Filter for air handling application
_ Gas-phase removal filter
_ Removal of VOC’s
_ Standard cell design
_ For fresh air and recirculation applications
_ Standard and customdesigned impregnation