Material Safety Data Sheet
ROYALSIL HI-PURITY MEMO
1 – SUBSTANCE AND SUPPLIER INFORMATION
Trade Name –
ROYALSIL HI-PURITY MEMO
Supplier –
ROYALSIL Inc.
25 Lancelot Lane
Mount Laurel, NJ 08054
Phone Number –
856-866-0038
Use of the Substance/Preparation Function – For industrial use Coupling agent
Cross linking agents
Surface modifier
US: Chemical emergency number –
800-424-9300
Canada: Canutec Emergency number – 613-996-6666
2 – COMPOSITION INFORMATION ON COMPONENTS
Chemical Name 3-Methacryloxypropyltrimethoxysilane
Alternative name –
3-(Trimethoxysilyl)propylmethacrylate
Minor impurities –
Not determined
CAS Number 2530-85-0
Percent (Wt./Wt.) 100%
EINECS Number –
219-785-8
Other Information The material is classified as hazardous under OSHA regulations.
3 – HAZARDS INFORMATION
No specific hazards have been identified
EMERGENCY OVERVIEW –
Form – liquid Color – colorless to yellowish
Low hazard for usual industrial handling
Potential Health Effects Eye contact – slightly irritating
Skin contact – slightly irritating
Inhalation – possibly irritating
Ingestion – no hazard expected in normal use
Odor – slightly aromatic
4 – SAFETY INFORMATION AND FIRST AID MEASURES
Inhalation –
Remove to fresh air. If breathing is difficult give oxygen and seek
medical attention.
Eye contact – Flush with copious amounts of water for at least 15 minutes.
If irritation persists, seek medical attention.
Skin contact – Remove contaminated clothing. Wash affected area with soap and
water. Rinse thoroughly. If irritation persist or other symptoms are
observed, seek medical attention.
Ingestion –
Rinse out mouth and drink lots of water. In case of irritation or other
symptoms, see medical attention.
ROYALSIL Inc.
25 Lancelot Lane, Mount Laurel, New Jersey 08054, P: 856-866-0038
Page 1 of 5
Material Safety Data Sheet
ROYALSIL HI-PURITY MEMO
Notes to physician – after absorbing large amounts of substance:
administration of activated charcoal.
Acceleration of gastrointestinal passage.
5 – FIRE & FLAMMABIITY INFORMATION
Conditions of flammability – Under fire conditions, material may decompose to form
flammable and/or explosive mixtures in air.
Flash point –
2120F - 1000C: closed cup
Explosive limits –
N/A
Auto ignition temperature – 265OC
Flammability –
N/A
Extinguishing Media –
Suitable: Carbon dioxide, dry chemical powder, or appropriate
foam.
Fire Fighting –
Protective equipment. Wear self-contained breathing apparatus
and protective clothing to prevent contact with skin and eyes.
Specific Hazards –
Emits toxic fumes under fire conditions.
Suitable extinguishing media Water, stray, foam, CO2, dry powder.
Special protective equipment for fire-fighters As in any fire, wear self-contained positive-pressure breathing apparatus,
(MSHA/NIOSH approved or equivalent) and full protective gear.
6 – ACCIDENTAL RELEASE INFORMATION
Procedures of personal precautions – wear respirator, chemical safety goggles, rubber
boots, and heavy rubber gloves.
Methods for cleaning up – Soak up with absorbent material, e.g., sand, silica gel, acid binder, universal
binder or sawdust. Place in a marked, sealable container and dispose of in accordance
with existing federal, provincial, state and local regulations.
7 – STORAGE AND HANDLING INFORMATION
Handling –
User exposure: do not breathe vapor. Avoid contact with eyes, skin and
clothing. Avoid prolonged or repeated exposure.
Storage –
Suitable: keep container tightly closed. Store in a cool dry place. Handle and store
under nitrogen. Avoid direct sunlight or UV radiation
Special requirements – Moisture sensitive. Handle and store under inert gas. Heat sensitive.
8 – PERSONAL PROTECTION & EXPOSURE CONTROLS
Engineering controls – Mechanical exhaust required. Safety shower and eye bath.
Personal protective equipment –
Respiratory – Use self-contained breathing apparatus or other supplied-air
respirator
Hand –
Compatible chemical-resistant gloves.
Eye –
Chemical safety goggles.
Skin –
Protective clothing.
General hygiene measures – Avoid contact with eyes and skin. Do not inhale
gases/vapors/aerosols. Do not eat, drink or smoke while handling.
ROYALSIL Inc.
25 Lancelot Lane, Mount Laurel, New Jersey 08054, P: 856-866-0038
Page 2 of 5
Material Safety Data Sheet
ROYALSIL HI-PURITY MEMO
9 – PHYSICAL & CHEMICAL INFORMATION
CAS No.
2530-85-0
Einecs No.
219-785-8
Formula
C10H20O5Si
Molecular Weight
248.35
Viscosity 250C
2 CST
Boiling Point
2550C [760mmHg]
Flash Point
1080C
Color & Appearance
Colorless transparent liquid
Density 25/250C
1.045
Refractive Index
1.430 {250C]
Melting Point
<-50 0C
Water solubility
Virtually insoluble
pH-Value
N/A
10 – REACTIVITY & STABILITY
Conditions of avoid Protect from moisture
Materials to avoid Peroxides, water
Hazardous decomposition products – Methanol in case of hydrolysis
Hazardous reactions – Exothermic reaction with peroxides
Hazardous Polymerization – Will not occur
11 – TOXICOLOGICAL INFORMATION
Route of Exposure
Skin contact –
Skin absorption –
Eye contact –
Inhalation –
Causes skin irritation
May be harmful if absorbed through the skin
Causes eye irritation
Material is irritating to mucous membranes and upper
respiratory tract. May be harmful if inhaled
Ingestion –
May be harmful if swallowed
Target Organs or Systems - Eyes, kidneys
Signs and Symptoms of Exposure - Contact with moisture liberates methanol. Ingestion of
methanol may cause blindness, nausea, headaches, vomiting, gastrointestinal upset,
dizziness, irregular breathing, weakness, confusion, drowsiness, unconsciousness, and
death. The chemical, physical and toxicological properties have not been thoroughly
investigated.
12 – ENVIRONMENTAL INFORMATION
Environmental fate and distribution –
No specific information is available
Environmental effects –
No specific information is available
Fate and effects in waste water treatment plants – No specific information is available
Elimination information (persistence and degradability)
Biodegradability
74%
Method: EC 92/69
ROYALSIL Inc.
25 Lancelot Lane, Mount Laurel, New Jersey 08054, P: 856-866-0038
Page 3 of 5
Material Safety Data Sheet
ROYALSIL HI-PURITY MEMO
Ecotoxicity to fish
Toxicity to fish
LC50 Brachydanio rerio: > 1024.00 mg/l /96h
Method: EC 92/69
LC0 Brachydanio rerio: > 1024 mg/l /96h
Method: EC 92/69
Toxicity to daphnia
EC50 Daphnia magna: > 876.00/l /48h
Method: EC 92/69
Toxicity to algae
EC50 scenedesmus subspicatus: > 536.00 mg/l /72h
Method: EC 92/69
NOEC scenedesmus subspicatus: 322 mg/l /72h
Method: EC 92/69
Toxicity to bacteria
EC 10 Pseudomonas putida: 2200 mg/l /16h
Method: DIN 38412 part 8
Toxicity in other terrestrial non-mammals
LC50 Eisenia foetida foetida: > 1000.00 mg/kg 14d
Method: SC 88/302
General Ecological Information The data we have at our disposal does not
Necessitate identification
13 – DISPOSAL INFORMATION
Appropriate method of disposal of substance or preparation – Contact a licensed professional waste
disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and
burn in a chemical incinerator equipped with an afterburner and scrubber. Observe all federal, state,
and local environmental regulations.
14 – TRANSPORT INFORMATION
DOT Road Shipment – This substance is considered to be non-hazardous for transport.
Ocean Shipment – (IMDG) –
This substance is considered to be non-hazardous for transport.
Air Shipment – (ICAO/IATA) – This substance is considered to be non-hazardous for transport.
Transport/further information – Not classified as dangerous in the meaning of transport regulations.
15 – REGULATORY INFORMATION
US Federal Regulations
OSHA If listed below, chemical specific standards apply to the product or components:
None listed
Clean Air Act Section (112)
If listed below, components present at or above the de minimus level are hazardous air pollutants:
None Listed
CERCLA Reportable Quantities
If listed below, a reportable quantity(RQ) applies to the product based on the percent of the
named component:
None Listed
ROYALSIL Inc.
25 Lancelot Lane, Mount Laurel, New Jersey 08054, P: 856-866-0038
Page 4 of 5
Material Safety Data Sheet
ROYALSIL HI-PURITY MEMO
SARA Title III Section 311/312 Hazard Categories
The product meets the criteria only for the listed hazard classes:
Acute Health Hazard
SARA Title III Section 313 Reportable Substances
If listed below, components are subject to the reporting requirements of Section 313 of Title III
of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
None Listed
Toxic Substances Control Act (TSCA)
If listed below, non-proprietary substances are subject to export notification under
Section 12 (b) of TSCA:
None Listed
Labeling According to SC Directives – Not subject to labeling provisions by Directive 67/548/EEC
Chemical inventory
Canada –
Ingredients of this product are on the DSL
Europe –
Ingredients of this product are on the EINECS inventory
United States – Ingredients of this product are listed on the TSCA inventory or are exempt
Australia –
This product, or the components, is listed or exempt from listing on the
Australian inventory of Chemical Substances (AICS)
Japan This product, or the components, is listed or exempt from listing on the
Existing and New Chemical Substances (ENCS) list
Korea This product is listed on the Existing Chemicals List (ECL)
16 – ADDITIONAL INFORMATION
It must be recognized that the physical and chemical properties of any product may not be fully
understood and that new, possible hazardous products may arise from reactions between chemicals. The
information given in this data sheet is based on present knowledge and shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
HMIS Ratings
Health:
Flammability:
Physical Hazard:
NFPA Ratings
Health:
Flammability:
Reactivity
1
1
1
1
1
1
REV: 05-02-11
ROYALSIL Inc.
25 Lancelot Lane, Mount Laurel, New Jersey 08054, P: 856-866-0038
Page 5 of 5