Material Safety Data Sheet
Increte Systems, Inc.
P. O. Box 151103
Tampa, Florida 33684
(813)886-8811 FAX (813)886-0188
Emergency Only 1-800-424-9300 (CHEMTREC)
International
1-202-483-7616
Issue Date: May 1, 1997
Rev.Date 01/30/2004
Page 1 of 2
Section I – Identification
Product Name: Wall Form Release
Classification:
HMIS Rating
Health: 2* (Chronic)
Flammability 3
Reactivity: 0
N/A
D.O.T. Hazard Class:
N/A
Ingredient
Section II – Components
OSHA PEL
ACGIH TLV
CAS
% Wt
Naphthenic Oil
Not Listed
>90
Not Listed
64742-46-7
Note 1: This product does not contain regulated levels of hazardous ingredients as defined in
29 CFR 1910.1200.
Section III – Physical Properties
Boiling Point: 500 F
Vapor Pressure: <.001mm Hg @ 68oF (20oC)
Melting Point: N.A.
Vapor Density: 9 + Air = 1
Evaporation Rate: 1000 X Slower
Specific Gravity: 0.93
Water Solubility: Immiscible
Non-volatile: N/A
Physical Appearance: Clear Amber liquid
o
o
Flash Point: 280 F
Section IV – Fire and Explosion Hazard Data
Explosion Limits (LEL): Not determined
UEL: Not determined
Extinguishing Media: Regular foam, carbon dioxide, or dry chemical.
Hazardous Decomposition Products: May form toxic materials such as carbon dioxide, carbon
monoxide, or various hydrocarbons.
Firefighting Procedures: Wear self-contained breathing apparatus with full facepiece operated in the
positive pressure demand mode.
Section V – Health Hazard Information
Potential effects of exposure (listed by primary routes of entry)
Inhalation: Excessive exposures to airborne mist may cause discomfort, nausea, and irritation to eyes,
nose, throat, and lungs.
Skin: Mild irritation may occur when prolonged or repeated contact. Estimated Dermal LD 50 in rabbits is
2000 mg/kg. Darise skin irritation score is 0.29 out of 8.0.
Ingestion: Slightly toxic. Pulmonary aspiration hazard if swallowed and vomiting occurs. LD 50 in rats is in
excess of 30 grams/kg. Of rat body weight.
EyeContact: Contact with the eye may cause minimal irritation.
Emergency & First Aid Procedures
2 of 2
Inhalation: Remove person from airborne mist environment to fresh air. Respiratory support if necessary.
Obtain medical assistance.
Skin: Wash with soap and water until no odor remains. Wash clothing before reuse. Destroy contaminated
shoes. If irritation or rash develops, consult a physician.
Ingestion: Do not induce vomiting. Obtain medical assistance. Small amounts that accidentally enter the
mouth should be rinsed out until no taste remains.
Eye Contact: Flush with water for at least 15 minutes. See a physician if complications arise.
Carcinogenicity OSHA:NO NTP:NO IARC: NO
Section VI – Chemical Reactivity
Stability: Stable.
Hazardous Polymerization: Will not occur.
Incompatibility: Strong oxidizing agents.
Conditions to Avoid: Avoid extreme temperatures.
Hazardous Decomposition Products: Incomplete combustion produces carbon monoxide and
asphyxiant.
Section VII – Spill Procedures
Spill: Absorb spilled product onto inert absorbent material.
Waste Disposal Method: Dispose of material in a manner consistent with local, state and federal law.
Not a RCRA Hazardous wastes if uncontaminated. Do not flush to drain/storm sewer. Contract to
authorized disposal service.
Section VIII – Special Protection Information
Respiratory Protection: Concentration in air determines protection needed. Use only NIOSH certified
respiratory protection.
Ventilation: Local exhaust.
Gloves: Impervious.
Eye Protection: Wear face-shield or chemical-resistant goggles.
Other Protective Equipment: Wear appropriate work clothing to prevent skin contact. Wash clothing
before reuse.
Section IX – Special Precautions
Handling and Storing: Avoid prolonged or repeated inhalation of heated vapors or spray mists. Avoid
prolonged or repeated skin contact. Treat empty containers with the same hazard precautions given
in this data sheet.
This information is provided in good faith and is correct to the best knowledge of Inco Chemical Company, Inc. Inco
Chemical Co., Inc. makes no representation as to its completeness or accuracy. Customers are encouraged to make
their own determination as to the suitability of this product for their purpose prior to use. Inco Chemical Co., Inc.
disclaims responsibility for damages of any kind resulting from the use of this information. No warranty of
merchantability, fitness for use, or any other warranty is expressed or is to be implied regarding the accuracy of these
data.