I have a problem, my jewellery is all over the place and I have
no where to put all the items. I need a box to put ,my jewellery
in so I don’t loose any. The jewellery that I have is a collection
of rings, chains, bracelets and earrings. My jewellery box must
have enough space for all these items, (about six).
This could be what the
box looks like, with the
six columns. This is a
traditional layout for a
box and I’d like my
design to be more
contempary.
The size of jewellery that is allowed suitable for the box would be any rings, chains, some
bracelets and earrings. Only one or two bracelets would be able to fit. There can be a lot of
rings and chains aloud.
Chain
wrists
Finger
Ear or eye
Primary Function: To store jewellery of different sizes rings etc.
Secondary Function: To look good and keep jewellery safe.
1. My box should be appropriate for any hand size and jewellery. 2. The box is round so any hand size can
lift it. 3. The box is a sphere for also excellent design and stunning looks for user.
There's different types of Jewellery boxes you can get
mostly for jewellery though, and for cigars and personal
things.
This box will be able to suite the hands from the 5th to the 95th
percentile, which means that any body with the wee, to big
size of hands will be able to get jewellery in and out without
difficulty.
This is my
Jewellery box and
it looks like this, it
also has a lid that
locks and shuts to,
keeping the
jewellery safe. It
has six spaces for
any jewellery you
wish.
1st: Cut out two cubes from tree.
2nd: Saw of sharp corners of cubes.
3rd: Put on wood turner and make it more round.
4th: After that make hole inside cylinder.
5th: Do same to other side but flat ended.
6th: Cut out the inside of the Half-Sphere and
make it smooth.
7th: Place mirror on non-flattened side.
8th: Add hinges for opening and locking.
Stages of Work – Miss McNamee’s Version:
1.
Collect all materials and tools required to begin manufacturing, including – tenon saw, steel rule, try square, compass, saw board, and
lathe tools
2.
Use compass to draw out a circle on both ends of the jewellery box
3.
Use tenon saw to cut corners of the piece of wood, to create a more circular shape
4.
Use centre lines as a guide for mounting the wood block onto the face plate to prepare for turning
5.
Turn the wood block down to a cylinder
6.
Gauge out the centre of the block to create a bowl shape
7.
Sand wooden bowl to a high quality finish
8.
Remove completed bowl from the lathe
9.
Prepare second piece of wood for turning
10. Turn the wood block down to a cylinder
11. Gauge out the centre of the block to create a bowl shape
12. Sand wooden bowl to a high quality
13. Apply finish to both bowls
14. Cut the mirror and felt for the inserts into the block to the correct size
15. Add hinges to complete the project
16. Wax polish to finish
Par Quantit Descriptio Length
t
y
n
A 1
Oak
12x12c
m
B 1
Oak
12x12c
m
Breadth thick
12x12c
m
12x12c
m
2 1/2
2 1/2