HL15 Haz-Lock Series Linear Prismatic C - 2' and 4' Polycarbonate Wrap Luminaires for Surface Installation Class I Division 2, Group A, B, C, & D Project: Specifications: Fixture Type: Housing: Double channel housing of 20-gauge CRS, stainless steel or aluminum construction. End Caps: Precision stamped 20-gauge stainless steel end caps secured to housing hub assembly at each end with a threaded knurled ring. Gasket: Closed cell 100% pure neoprene gasketing. See Option “GG” for SealPro™ NSF Listed closed cell gasketing. Reflector: High reflectance white powder coat finished (min. reflectivity 88%). Lens: Smooth surface .125” clear linear prismatic polycarbonate. Lamps: Select lamps listed below. Lamps supplied by others. Electrical: Standard ballast - Electronic less than 10% THD high performance instant start (0°F) universal voltage (120-277 volt). See options for other choices. Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options for white powder coated stainless. Cross Section 8" Installation: Four .312” debossed holes for surface mounting. Stainless steel Hub/Ring/Plug assembly provided for wiring through end caps. 2.625" Listings: UL and CUL Listed for Wet Location and Hazardous Locations (Class I, Division 2, Groups A, B, C, & D). IBEW Label. Ordering Information: HL - LPC - Series Installation Type - Material - Size - Lamps HL LPC = Linear Prismatic1 = CRS External & Internal Surface 2 = SS Ext. & CRS Internal Qty/Type 3 = SS External & Internal 4 = AL Ext. & CRS Internal 20 = 2' Housing 2/T8 = F17T8 17W T8 (G13) 40 = 4' Housing 2/T8 = F32T8 32W T8 (G13) 80 = 8' Housing 4/T8 = F32T8 32W T8 (G13) (Tandem) Standard WET LOCATION Voltage Options 120V 277V 347V* UNV* H/FF = Hazardous Fuse & Holder H/FD = Two Hazardous Fuses & Holders 2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast* EBPRS= Program Rapid Start Ballast* H/EM = 1 Lamp Battery Pack (700L)* H2/EM = 2 Lamp Battery Pack (1400L)* GG = N.S.F. Listed Gasketing TP = Stainless Steel Tamperproof Fasteners HD85 = 85 P.S.I. Hosedown WHT= White Finished Stainless Steel PMB= Pendant Mount Bracket PA= Linear Prismatic Clear Acrylic* Optional IP 64 HOSE DOWN IEC 60529 RATED 85 PSI Kurtzon Lighting / Innovators in Lighting Since 1898 * Note: Not all options are compatible with every option. Ex: CRM is not Compatible with HD85. Consult factory for multiple options marked "*". Morris Kurtzon, Incorporated 1420 South Talman Avenue, Chicago, Illinois 60608 773/277-2121 FAX 773/277-9164 © 2011 www.kurtzon.com HL15 Haz-Lock Series Linear Prismatic C - 2' and 4' Polycarbonate Wrap Luminaires for Surface Installation Class I Division 2, Group A, B, C, & D Report# 11077 Fixture Eff.= 68.20% Two Lamp 32W T8 Linear Prismatic (Clear) Across 1.2 Along Ratio S/MH = 1.3 x-LPC-1-40-2/T8-UNV Lumens/Lamp= 2950 Ceiling Refl. 80 50 10 0 Wall Refl. 70 50 30 10 50 30 10 50 30 10 50 30 10 0 0 1 2 3 4 5 6 7 8 9 10 79 71 64 59 54 50 46 43 40 37 35 79 67 58 51 46 41 37 34 31 28 26 79 64 54 46 40 35 31 28 25 23 21 79 61 49 41 35 31 27 24 21 19 17 70 60 52 46 41 37 34 31 28 26 24 70 57 49 42 37 32 29 26 23 21 20 70 55 45 38 33 29 25 22 20 18 17 65 55 48 43 38 35 32 29 27 25 23 65 53 45 39 35 31 27 25 22 20 19 65 52 43 36 31 27 24 22 19 18 16 60 51 45 40 36 32 30 27 25 23 22 60 50 43 37 33 29 26 24 21 20 18 60 48 40 35 30 26 23 21 19 17 15 58 46 38 33 28 25 22 19 17 16 14 PMB Option Conduit Entry thru Hub in endcap. Knurled Ring secures endcap during use. Cross Section Installation Detail 8" M2 2.625" (1) .875" K.O. M1 L1 Note: K.O. is not on center for 2' models *Mounting Dimensions Row Mount Detail Endcap removed for service. M1 L1 M1 L1 L2 Size L1 L2 M1 M2 20 (2') 25.37 >3.0 13.0 5.00 40 (4') 49.37 >3.0 37.0 5.00 80 (8') 97.37 >3.0 55.0 5.00 Kurtzon Lighting / Innovators in Lighting Since 1898 Morris Kurtzon, Incorporated 1420 South Talman Avenue, Chicago, Illinois 60608 773/277-2121 FAX 773/277-9164 © 2011 www.kurtzon.com