HL16
Haz-Lock Series
Linear Prismatic D - 2' , 4' and 8' Polycarbonate Wrap Luminaires for Surface Installation
Class I Division 2, Group A, B, C, & D
Project:
Specifications:
Fixture Type:
Housing: Double channel housing of 20-gauge CRS, stainless steel or aluminum construction.
End Caps: Precision stamped 20-gauge stainless steel end caps secured to
housing hub assembly at each end with a threaded knurled ring.
Gasket: Closed cell 100% pure neoprene gasketing. See Option “GG” for
SealPro™ NSF Listed closed cell gasketing.
Reflector: High reflectance white powder coat finished (min. reflectivity 88%).
Lens: Smooth surface .125” clear linear prismatic polycarbonate.
Lamps: Select lamps listed below. Lamps supplied by others.
Electrical: Standard ballast - Electronic less than 10% THD high performance
instant start (0°F) universal voltage (120-277 volt). See options for other
choices.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options for white powder coated stainless.
Cross Section
9.00"
Installation: Four .312” debossed holes for surface mounting. Stainless steel
Hub/Ring/Plug assembly provided for wiring through end caps.
Listings: UL and CUL Listed for Wet Location and Hazardous Locations
(Class I, Division 2, Groups A, B, C, & D). IBEW Label.
4.00"
Ordering Information:
HL
- LPD
-
-
-
Size
-
Series Installation Type
Material
Lamps
HL
LPD = Linear Poly
Surface
1 = CRS External & Internal
2 = SS Ext. & CRS Internal
Qty/Type
3 = SS External & Internal 4 = AL Ext. & CRS Internal 20 = 2' Housing
2, 3 or 4/T8 = F17T8 17W T8 (G13)
40 = 4' Housing
2, 3 or 4/T8 = F32T8 32W T8 (G13)
80 = 8' Housing
2, 4, or 8/T8 = F32T8 32W T8 (G13) (Tandem)
Standard
WET LOCATION
Voltage
Options
120V
277V
347V*
UNV*
H/FF = Hazardous Fuse & Holder
H/FD = Two Hazardous Fuses & Holders
2/EB = Two Ballasts, (Two Circuits)*
EBL = -20°F Electronic Ballast*
EBPRS= Program Rapid Start Ballast*
H/EM = 1 Lamp Battery Pack (700L)*
GG = N.S.F. Listed Gasketing
TP = Stainless Steel Tamperproof Fasteners
HD85 = 85 P.S.I. Hosedown
WHT= White Finished Stainless Steel
PMB= Pendant Mount Bracket
PA= Linear Prismatic Clear Acrylic*
Optional
IP
64
HOSE DOWN
IEC 60529
RATED
85
PSI
Kurtzon Lighting / Innovators in Lighting Since 1898
* Note: Not all options are compatible with every
option. Ex: 2/EB is not compatible with H/EM.
Consult factory for multiple options marked "*".
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164 © 2011
www.kurtzon.com
Haz-Lock Series
Linear Prismatic D - 2', 4' and 8' Polycarbonate Wrap Luminaires for Surface Installation
Class I Division 2, Group A, B, C, & D
HL16
Report#
44678
Fixture Eff.=
59.10%
Three Lamp 32W T8 LINEAR PRISMATIC
1.4 Across
1.3 Along
Ratio S/MH =
x-LPD-1-40-3/T8-UNV
2950
Lumens/Lamp=
Ceiling Refl.
80
50
10
0
Wall Refl.
70 50 30 10 50 30 10 50 30 10 50 30 10
0
0
1
2
3
4
5
6
7
8
9
10
68
61
55
50
46
42
39
36
34
31
29
68
58
50
44
39
35
31
28
26
24
22
68
55
46
39
34
29
26
23
21
19
17
68
52
42
35
30
26
22
20
17
16
14
60
51
44
39
35
31
28
25
23
21
20
60
49
41
35
31
27
24
21
19
17
16
60
47
38
32
27
24
21
18
16
15
13
55
46
41
36
32
29
26
24
22
20
19
55
45
38
33
29
25
22
20
18
17
15
55
43
36
30
26
22
20
17
16
14
13
50
43
37
33
29
27
24
22
20
19
17
50
41
35
30
27
24
21
19
17
16
14
50
40
33
28
24
21
19
17
15
13
12
48
38
32
27
23
20
17
15
14
12
11
PMB Option
Conduit Entry thru Hub in
endcap. Knurled Ring secures endcap during use.
Cross Section
9.00"
Installation Detail
M2
4.00"
(1) .875" K.O.
M1
L1
Note: K.O.
is not on center
for 2' models
*Mounting
Dimensions
Row Mount Detail
Endcap removed for service.
M1
L1
M1
L1
L2
Size
L1
L2
M1
M2
20 (2')
25.37
>3.0
13.0
6.00
40 (4')
49.37
>3.0
37.0
6.00
80 (8')
97.37
>3.0
55.0
6.00
Kurtzon Lighting / Innovators in Lighting Since 1898
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164 © 2011
www.kurtzon.com