vandal-lock solutions

advertisement
THE FUTURE OF LIGHTING
S P E C I F I C A T I O N
G R A D E
VANDAL-LOCK
SOLUTIONS
Choose KURTZON.
With roots dating back more than 100 years, KURTZON
has always been an industry leader in serving the needs of
companies and institutions seeking high-quality, energy-saving
lighting solutions.
Independently tested and manufactured to the highest
standards, KURTZON specification-grade LED lighting is an
asset our customers come to count on for savings
and reliability, day after day, year after year.
Our Vandal-Lock Series is a
natural extension of our heritage of quality.
Designed for environments where vandalism and abuse is
a regular possibility, this tough line of lighting represents an
investment that protects itself.
5/25 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five
(5) year warranty. The remaining fixture is covered by a twenty five (25) year
warranty. See waranty statement at kurtzon.com for complete details.
The VANDAL-LOCK Series
The Vandal-Lock Series is designed for places where ordinary fixtures fail,
from public park restrooms to locker rooms to transit spaces – unsupervised
areas where durability and vandal resistance is essential. Featuring
tamper-resistant hardware and rigid, one-piece doorframes using durable
polycarbonate lenses, Vandal-Lock provides high levels of strength and security.
Designed for use in:
• Restrooms in schools, parks and commercial unsupervised spaces
• Locker rooms
• Transit walkways
• Parking garage stairwells
• Supervised psychiatric patient areas
• Underpasses and viaducts
Our five models are built, tested and perfected especially for the
environments in which they’re meant to live, and include both
energy-saving LED and fluorescent options. Resistant to the rigors
of daily use and abuse, all carry on the KURTZON tradition of sophisticated
lighting solutions that weather even the most challenging conditions.
Vandal-Lock WRAP Series
Project
Fixture Type
Cat. Number
4’ High Abuse High Efficiency Wrap Luminaires
IP Rated, Wet Locations
Approved By
SPECIFICATIONS
Housing: Double channel housing of 20-gauge CRS, type 304 stainless steel or aluminum construction.
HOSE DOWN
End Caps: Precision stamped 20-gauge type 304 stainless steel end caps secured to housing with
Tamper resistant Torx drive stainless steel fasteners or optional hub assembly.
85
PSI
NSF
RATED
C-2 NON-FOOD
ZONE
3.7"
Gasket: 100% pure neoprene closed cell gasketing. Resists aging, grease and solvents.
VL-LPA
Reflector: High reflectance white powder coat finished (min. reflectivity 88%).
Lens: Extruded .125” thick linear prismatic polycarbonate with frost diffusion inner layer for obscuring
LED image.
4.50"
Source: FLUORESCENT: T5, T5HO, T8 and LED (Lamps supplied by others.)
LED: Zhaga™ replaceable LED arrays using commercially available boards warranted for 5 years.
Available in 3000, 3500 and 4000K CCT, 80 CRI, highly consistent color maintained to 3.5 SDMC.
Five (5) year warranty B50/L70.
5.5"
Drivers: Standard driver(s): Universal voltage (120-277 volt). LED drivers are commercially available
high efficiency, HPF and dimmable with 0-10v control. Standard drivers are programable to match
wattage or lumen requirements. Five (5) year warranty.
VL-LPB
Fluorescent Ballast: Electronic less than 10% THD high performance instant start (0 F) universal
voltage (120-277 volt). Standard driver(s): Universal voltage (120-277 volt). LED drivers are commercially
available high efficiency, HPF and dimmable with 0-10v control. Standard drivers are programable to
match wattage or lumen requirements. Five (5) year warranty.
6"
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish.
See Options for white powder coated stainless.
Installation: Not for Outdoor use. Orientation restricted to vertical ±45° (typical ceiling mount) required
for wet locations only. Suitable for any orientation in damp locations. Four .312” debossed holes for
surface mounting. One .875” (1/2” trade-size) flattened and silicone sealed knockout located on back of
housing for wiring. See below for other mounting and supply entry options. Rows: Joiner bands provided
for continuous row mounting (See Option: CRM). Please specify number of fixtures in each run.
Wet Location
Mounting Positions
±45°
Listings: ETL Listed for Wet Location. Rated IP-55 dust and water resistance. (IP-65 for LPB series ).
NSF Listed for Food, Splash and Non-Food zones. Optionally rated 85 psi hosedown (HD85).
5/25 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five (5) year warranty. The
reamining fixture is covered by a twenty five (25) year warranty. See waranty statement at kurtzon.com
for complete details.
Delivered lms
& input wattage
Series Lens
Profile
Material
Size
Source: LED
VL
A:
1/LED or Lamp
1: CRS Ext.
& Int.
40: 4’ Housing
B:
2/LEDs
2: SS Ext.
& CRS
Int. #
For LPA only
1/LEDR30: 3000K CCT, 4305 lm, 41W
1/LEDR35: 3500K CCT, 4305 lm, 41W
1/LEDR40: 4000K CCT, 4305 lm, 41W
1/LEDR50: 5000K CCT, 4305 lm, 41W
1/T8: F32T8
1/T5: F28T5
1/T5HO: F54T5HO
For LPB only
2/LEDR30: 3000K CCT, 8186 lm, 78W
2/LEDR35: 3500K CCT, 8186 lm, 78W
2/LEDR40: 4000K CCT, 8186 lm, 78W
2/LEDR50: 5000K CCT, 8186 lm, 78W
2/T8: F32T8
2/T5: F28T5
2/T5HO: F54T5HO
LP:
LED Clear
Prismatic
(Linear)
3: SS Ext.
& Int. #
4: AL Ext.
& CRS Int.
or Source: Fluorescent
Voltage
120V
277V
UNV
Options
FF: Fuse & Holder
2/ED: Two Drivers, (Two Circuits)
EM: 1100 Lumen LED Battery Pack*
1/EM: 700 Lumen Fluorescent Battery Pack*
2/EM: 1200 Lumen Fluorescent Battery Pack*
CRM: Continuous Row Mounting*
GG: NSF Listed for Food Zones ‡
AH: Allen Head Tamper Resistent Screws
SSH: Stainless Hubs (2) for Feed Thru Supply
HD85: 85 P.S.I. Hosedown*
WHT: White Finished Stainless Steel
PMB: Pendant Mount Brackets (2)
PPMB: Pipe Mount Brackets (2)
CMB: Corner Mount Brackets (2)
AMB: Adjustable Mount Bracket (2)
PxL: Programed to User Specified Lumen Value.◊
PxW: Programed to User Specified Wattage Value.◊
ORDERING INFORMATION
VL
LP
40
___V
* Consult factory for multiple options. ‡ Housings made of Stainless Steel are capable of NSF Food Zone with GG option. ◊ Replace x with Lumens or W. Use lm/w value from chart to determine final lumens or W when option Px is chosen.
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.
Vandal Lock Series - Surface
Project
Fixture Type
Cat. Number
2’ Sealed High Abuse Luminaire with LED Sources
IP-66 Rated, Wet Locations.
Approved By
SPECIFICATIONS
Housing: 16-gauge type 304 stainless steel construction. Fully seam welded and passivated. 2B finish.
HOSE DOWN
1700
PSI
Doorframe: Precision formed 18-gauge type 304 stainless steel overlapping frame hinged by cables
and secured to housing with standard stainless steel countersunk philips head. See below for optional
rotary latches and tamper resistant Torx drive stainless steel screws.
Gasket: 100% pure neoprene closed cell gasketing. Resists aging, grease and solvents.
Optional
Latches
Shown
Reflector: Die formed specular aluminum creates a NEMA type 2 distribution (min. reflectivity 95%).
Lens: (Standard) Flush .187” prismatic pattern P12 polycarbonate with smooth external surface.
Source: ZhagaTM replaceable LED arrays using commercially available boards warranted for 5 years.
Available in 3500, 4000K and 5000K CCT, 80 CRI, highly consistent color maintained to 3.5 SDMC.
Five (5) year warranty B50/L70.
Drivers: Standard driver(s): Universal voltage (120-277 volt). LED drivers are commercially available
high efficiency, HPF and dimmable with 0-10v control. Standard drivers are programable to match
wattage or lumen requirements. Five (5) year warranty.
Finish: 2-B (mill finish) stainless steel finish. Optional high durability grey powder coat finish (1,000
hour salt spray test).
6.0”
Installation: Suitable for any orientation. Two adjustable mounting brackets made of formed 12 ga 304
stainless steel. Two .875” (1/2” trade-size) flattened and silicone sealed knockout located on endplate
of housing for wiring.
7.9”
Listings: ETL Listed for Wet Location. Rated IP-66 dust and water resistance. Optional NSF Listed for
Food, Splash and Non-Food zones. Rated 1700 psi hosedown (HD1700).
5/2 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five (5) year warranty. The
reamining fixture is covered by a two (2) year warranty. See waranty statement at kurtzon.com for
complete details.
5.4”
9.4”
26.0”
24.0”
Series Profile
Material
VL
3: 304 SS
Hsg, Door
ST:
Surface
Size
20: 2’ Housing
Source: LED
Delivered lumens
and input wattage
2/LEDR: 2300 lm, 41W
2/LEDH: 4150 lm, 77W
CCT
Voltage
35
120V
40
277V
50
UNV
347V
Options
FF: Fuse & Holder
2/ED: Two Drivers, (Two Circuits)
TP: Stainless Steel Tamperproof Fasteners
SSL: Stainless Steel Rotary Latches
HUB: 1/2” Size Cast Hub Supply Entry
WHT: White Finished Stainless Steel
CC/GREY: Gloss Grey Powder Coat
PxL: Programed to User Specified Lumen Value.◊
PxW: Programed to User Specified Wattage Value.◊
ORDERING INFORMATION
VL
ST
3
20
2/LED__
___V
* Consult factory for multiple options marked. ◊ Replace x with Lumens or W. Use lm/w value from chart to determine final lumens or W when option Px is chosen. xx: Enter the CCT divided by 100 (example: 3500k CCT=35 )
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.
Vandal-Lock Series - COR
Project
Fixture Type
Cat. Number
4’ High Abuse Corner Mount Luminaires
IP Rated, Wet Locations
Approved By
SPECIFICATIONS
Housing: CRS or type 304 stainless steel or aluminum construction.
HOSE DOWN
Door Frame: One-piece 18 gauge CRS or 20 gauge type 304 stainless steel door frame with 90°
bevelled edges. Door frame suspended from housing by two 8” stainless steel aircraft cables. Door
frame NSF gasketed to housing and secured with 12 captive flush mounted stainless steel Tamper
resistant Torx fasteners.
1700
PSI
NSF
RATED
C-2 NON-FOOD
ZONE
Reflector: Full reflector panel white powder coat finished (minimum reflectivity 88%).
Lens: High durability .125” thick polycarbonate with inverted P12 prismatic pattern. Sealed to Door
with NSF listed RTV silicone. See “Options” for other choices.
Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)
Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage
(120-277 volt). LED drivers are commercially available high efficiency and dimmable programmable
drivers with 0-10v control. Suitable for through wiring.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish.
See Options for white powder coated stainless.
Installation: Four .312” holes for corner mounting. Two .875” flattened and silicone sealed
knockouts for wiring.
Listings: ETL Listed for Wet Location. Dust and water resistance rated IP-66. NSF -C2 listed for food
zone. Suitable for use in FDA & USDA inspected facilities. Rated at 1700 PSI Hosedown.
Cross
CrossSection
Section
5/25 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five (5) year warranty. The
reamining fixture is covered by a twenty five (25) year warranty. See waranty statement at kurtzon.com
for complete details.
Installation
Installation
InstallationDetail
Detail
Detail
7.50”
7.50”
(Top
(Top
(Top
&& Rear)
&Rear)
Rear)
(4)
(4)
(4).312”
.312”
.312”Holes
Holes
Holes
7.50”
7.50”
(2)
(2)
(2).875”
.875”
.875”KO's
KO's
KO's
7.50”
7.50”
7.50”
3.75”
3.75”
3.75”
8.44”
8.44”
36.0”
36.0”
36.0”
48.125”
48.125”
48.125”
Series Profile
Material
Size
Source: Fluorescent OR LED
VL
1: CRS Hsg. & CRS Door
2: CRS Hsg. & SS Door
3: SS Hsg. & SS Door
4: AL Hsg. & SS Door
40: 4’ Housing
1, 2 or 3/T8: F32T8
1, 2 or 3/T5: F28T5*
1 or 2/T5HO: F54T5HO*
COR:
Corner
Delivered lumens
and input wattage
2/LEDR30: 3000K CCT, 4500 lm, 76W
2/LEDR35: 3500K CCT, 4500 lm, 76W
2/LEDR40: 4000K CCT, 4500 lm, 76W
2/LEDR50: 5000K CCT, 4500 lm, 76W
Voltage
120V
277V
UNV
347V
Options
FF: Fuse & Holder
FD: Double Fuse & Holders
2/EB: Two Ballasts, (Two Circuits)
EBL: -20°F Electronic Ballast
EBPRS: Program Rapid Start Ballast
EBDIM: Electronic Dimming Ballast
HLO: High Light Output Ballast*
EM: 1100 lm LED Battery Pack
1/EM: 1 Lamp Battery Pack (700L)
2/EM: 1 or 2 Lamp Battery Pack (1400L)*
GG: N.S.F. Listed Gasketing
CRM: Custom Row Mounting*
TP: Stainless Steel Tamperproof Fasteners
WHT: White Finished Stainless Steel
PxL: Programed to User Specified Lumen Value.◊
PxW: Programed to User Specified Wattage Value.◊
ORDERING INFORMATION
VL
COR
40
___V
Note: Not all options are compatible with every option. Ex: EBPRS is not Compatible with EBL. *Consult factory for multiple options marked.
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.
Vandal-Lock Series - PBD
Project
Fixture Type
Cat. Number
8 Inch Aperture Recessed Vandal Resistant
LED Downlight
Approved By
SPECIFICATIONS
Housing: 20 ga. galvanized steel body and spun aluminum housing and plaster frame.
Door Frame/Trim: CRS or stainless steel formed with continuous lens holddown
system and TorxTM tamper proof screw entry. Cleanroom style construction with a smooth
cleanable surface with no crevices keeps the lens and baffle clean. See options for other
screw choices.
Gaskets: Neoprene gasket located at interface of door to housing. Neoprene Listed silicone
seals the door to the lens.
Baffle: White elliptical grooved baffle controls stray light for high visual comfort, without glare.
Other options listed below.
Lens: Clear non-prismatic .125” thick virgin polycarbonate that is silicone sealed to IP- 65 for
dust and water resistance.
LED: Remote Phosphor technology for consistent color. Commercially available, field replaceable
LED modules from Philips. Fortimo DLM series available in several color temperatures. Rated at
2000 lumens.
Electrical: Integrated constant current static low voltage DC commercially available driver
designed specifically for LED array. Driver has 0-10v dimming control compatible with all
common 0-10v dimming systems. Disconnects provided.
Finish: A white polyester powder coat on CRS doorframes. Stainless steel doorframes are
satin polished.
5.6”
Installation: Four adjustable L-brackets allow for seismic support and secure attachment to
metal T-Bars, joists or structural metal framing. Two sealed 1/2 inch trade size threaded holes
for wiring. Suitable for 1, 1.5 and 2 inch T-bar widths as well as drywall or plaster ceiling.
5.75”
8”
Listings: ETL Listed for Wet Locations. IP-65 dust and water jet resistance from below.
5/25 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five (5) year warranty.
The reamining fixture is covered by a twenty five (25) year warranty. See waranty statement at
kurtzon.com for complete details.
12.6”
10.2”
Series Installation Type
Material
Size
LED CCT
VL
4: Non-Magnetic
8: 8”Hsg.
DLM30: 3000K CCT 2000lm LED Module
DLM35: 3500K CCT 2000lm LED Module
DLM40: 4000K CCT 2000lm LED Module
DLH30: 3000K CCT 3000lm LED Module
DLH35: 3500K CCT 3000lm LED Module
DLH40: 4000K CCT 3000lm LED Module
PBD:
GRID/FLANGED
Voltage
UNV: 120V - 277V*
* Note: Voltage listed
above is the Remote Driver
input voltage. The output
voltage or fixture voltage is
determined by the driver but
less than 60Vdc.
Options
AH: Allen Head Tamper Resistent Screws
WBWT: White Baffle/White Trim
SRST: Specular Reflector/Stainless Trim
NBST: Nickel Baffle/Stainless Trim
BBWT: Black Baffle/ White Trim
NBWT: Nickel Baffle/White Trim
EM: 10W Remote Inverter Pack
ORDERING INFORMATION
VL
PBD
4
8
DL_________
UNV
REQUIRED ACCESSORY: Entrance filters for 9 fixtures in one room. Purchased separately.
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.
Vandal-Lock Series - Troffers
Project
Fixture Type
Cat. Number
1x4, 2x2 and 2x4 Abuse Resistant Troffers
For Public Spaces
LED
SPECIFICATIONS
Housing: One piece, seam welded, hole free 20-gauge CRSΩ, stainless steel or aluminum
construction. Each are only 4.5 inches tall.
Approved By
HOSE DOWN
NSF
1700
PSI
Door Frame: One-piece inset style 18-gauge CRS or 20-gauge type 304 stainless steel door
frame hinged to housing with two stainless steel cables. Secured by captive tamper resistant
Torx™ stainless steel screws.
C-2 NON-FOOD
ZONE
Flange Section View
Source: ZhagaTM replaceable LED arrays using commercially available boards warranted for
5 years. Available in 3500, 4000K and 5000K CCT, 80 CRI, highly consistent color maintained
to 3.5 SDMC. Five (5) year warranty B50/L70.
Flange Section View
4.5
”
.(
113)
Flange Section View
Reflector: Die formed metal with high refl ectance white polyester powder coat fi nish.
(minimum refl ectivity 92%).
4.5
”
.(
113)
4.5
”
.(
113)
Lens: High durability .125” thick Polycarbonate with P12 prismatic pattern inverted. Retained
to door by continuous brackets. Sealed to door with NSF listed RTV silicone. See “Options” for
other choices.
2x4
25x49.5
(635x
1257)
25x25.5
(635x648)
2x2
25x49.5
(635x
1257)
2x4
(635x648)
(635x
1257)
T-bar Grid
2x4 View
2x2 Section
TOGGLE RANGE
1.5-4
”
.(38100)
T-bar Grid2x2Section
View
2x4
4.5
”
.(
113)
23.7x23.7 23.7x4
7.7
(602x602) (602x
1211)
4.5.”( 113)
4.5
”
.(
113)
2x2
2x4
Surface23.7x23.7
Section
View
23.7x4
7.7
2x4
4.5
”
.(
113)
4.5
”
.(
113)
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro gasket with
vulcanized corners making a one-piece oil and solvent resistant gasket system.
TOGGLE RANGE
1.5-4
”
.(38100)
25x49.5 View
25x25.5Section
T-bar Grid
4.5
”
.(
113)
Installation:
Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened
and silicone sealed knockouts.
Grid: Standard luminaires accommodate 1.0” & 1.5” T-Bar Grid.
Surface: Four .312” dia. mounting holes and a removable gasketed wiring access plate.
2x2
25x25.5
(635x648)
TOGGLE RANGE
1.5-4
”
.(38100)
2x2
(602x602) (602x
1211)
24x24.
1 24x48. 1
2x2
2x4
(609x6 12) (609x1 221)
23.7x23.7 23.7x4
7.7
Surface
Section
View
(602x602)
(602x
1211)
Surface Section
View
2x4
2x2
4.5
”
.(
113)
4.5.”( 113)
Drivers: Standard driver(s): Universal voltage (120-277 volt). LED drivers are commercially
available high efficiency, HPF and dimmable with 0-10v control. Standard drivers are
programable to match wattage or lumen requirements. Five (5) year warranty.
24x24.1 24x48.1
1221)
(609x6
12) (609x
2x4
2x2
24x24.1 24x48.1
1221)
(609x6
12) (609x
2x4
2x2
24x48.1 2x4
24x24.1 2x2
1221)
24x24.
1 24x48. 1
(609x6
12) (609x
(609x6 12) (609x1 221)
Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard
for all housings. Stainless steel doorframes are satin polished unless option WHT is chosen.
Consult factory for satin polished housings.
Listings: ETL and CUL listed for wet locations. Dust and water resistance rated IP-65.
Rated for 1700 PSI Hosedown. NSF -C2 listed for Non- food zone. Suitable for use in FDA &
USDA inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E Class 1. See
“Options” for Class I, Div. 2 Groups A, B, C & D listing (X12). Bio-Safety levels 1 & 2.
5/25 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five (5) year
warranty. The reamining fixture is covered by a twenty five (25) year warranty. See waranty
statement at kurtzon.com for complete details.
Series Installation Type
Material
Size
LED
CCT
Voltage
VL
1: CRS Hsg. & CRS DoorΩ
2: CRS Hsg. & SS DoorΩ
3: SS Hsg. & SS Door
4: AL Hsg. & SS Door
5: AL Hsg. & AL Door
7: AL Hsg. & CRS Door
1x4: 1’ x 4’ Housing
1/LEDRxx: 3284lm/46 W
2/LEDRxx: 6541lm/76 W
2/LEDHxx: 12159lm/157 W
30
120V
35
277V
2/LEDRxx: 3727lm/46 W
3/LEDRxx: 5308lm/64 W
4/LEDRxx: 6381lm/76.7 W
3/LEDHxx: 8585lm/117 W
40
UNV
50
347V
F: FLANGED
G: GRID
S: SURFACE
2x2: 2’ x 2’ Housing
2x4: 2’ x 4’ Housing
Lens: Lamp Side/Lens Side
1: .125” Prismatic Polycarbonate
2: .140” P12 High Impact Acrylic
3: .187” Prismatic Polycarbonate
4: .156 Prismatic Tempered Glass
5: .125 Clear Polycarbonate
6: .187 Clear Polycarbonate
7: .250 Clear Polycarbonate
(Only specify one layer of prismatic lenses)
2/LEDRxx: 7313lm/76.7 W
3/LEDRxx: 11670lm/123 W
4/LEDRxx: 14600lm/153 W
4/LEDHxx: 19870lm/232 W
Options
FF: Fuse & Holder
FD: Double Fuse & Holders
2/EB: Two Ballasts, (Two Circuits)
AH: Allen Head Tamper Resist fasteners
EM: 1100 Lumens Battery Pack
WHT: White Finished Stainless Steel
PxL: Programed to User Specified Lumen Value.◊
PxW: Programed to User Specified Wattage Value.◊
ORDERING INFORMATION
VL
__/LEDRxx
__V
____/____
* Not all options are compatible with other options. Consult factory for additional choices & options marked. Ω = CRS housings are only available for surface mount. ◊ Replace x with Lumens or W. Use lm/w value from chart to determine final lumens or W when option Px is chosen.
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.
Vandal-Lock Series - Troffers
1x4, 2x2 and 2x4 Abuse Resistant Troffers
For Public Spaces
Project
Fixture Type
Cat. Number
FLUORESCENT
Approved By
SPECIFICATIONS
Housing: One piece, seam welded, hole free 20-gauge CRSΩ, stainless steel or aluminum
construction. Each are only 4.5 inches tall.
HOSE DOWN
NSF
1700
PSI
Door Frame: One-piece inset style 18-gauge CRS or 20-gauge type 304 stainless steel door
frame hinged to housing with two stainless steel cables. Secured by captive tamper resistant
Torx™ stainless steel screws.
C-2 NON-FOOD
ZONE
Sources: T5, T5HO, T8.
Flange Section View
Reflector: Die formed metal with high refl ectance white polyester powder coat fi nish.
(minimum refl ectivity 92%).
TOGGLE RANGE
1.5-4
”
.(38100)
4.5
”
.(
113)
Lens: High durability .125” thick Polycarbonate with P12 prismatic pattern inverted. Retained
to door by continuous brackets. Sealed to door with NSF listed RTV silicone. See “Options” for
other choices.
2x2
25x25.5
(635x648)
2x4
25x49.5
(635x
1257)
T-bar Grid Section View
Installation:
Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened
and silicone sealed knockouts.
Grid: Standard luminaires accommodate 1.0” & 1.5” T-Bar Grid.
Surface: Four .312” dia. mounting holes and a removable gasketed wiring access plate.
4.5
”
.(
113)
2x2
2x4
23.7x23.7 23.7x4
7.7
(602x602) (602x
1211)
Surface Section View
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro gasket with
vulcanized corners making a one-piece oil and solvent resistant gasket system.
4.5
”
.(
113)
2x4
2x2
24x24.1 24x48.1
1221)
(609x6
12) (609x
Ballast: Electronic less than 10% THD high performance instant start (0 F) universal
voltage (120-277 volt). Standard driver(s): Universal voltage (120-277 volt). LED drivers are
commercially available high efficiency, HPF and dimmable with 0-10v control. Standard drivers
are programable to match wattage or lumen requirements. Five (5) year warranty.
Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard
for all housings. Stainless steel doorframes are satin polished unless option WHT is chosen.
Consult factory for satin polished housings.
Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-65. Rated
for 1700 PSI Hosedown. NSF -C2 listed for Non- food zone. Suitable for use in FDA & USDA
inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E Class 1. See
“Options” for Class I, Div. 2 Groups A, B, C & D listing (X12). Bio-Safety levels 1 & 2.
5/25 Year Warranty: The driver(s), ballast(s) and LED’s are covered by a five (5) year
warranty. The reamining fixture is covered by a twenty five (25) year warranty. See waranty
statement at kurtzon.com for complete details.
Series Installation Type
Material
Size
Fluorescent
VL
1: CRS Hsg. & CRS DoorΩ
2: CRS Hsg. & SS DoorΩ
3: SS Hsg. & SS Door
4: AL Hsg. & SS Door
5: AL Hsg. & AL Door
7: AL Hsg. & CRS Door
1x4: 1’ x 4’ Housing
1, 2 or 3/T8: F32T8
1, 2 or 3/T5: F28T5
1 or 2/T5HO: F54T5HO*
2, 3, 4 or 6/T8: F17T8
2, 3, 4 or 6/T5: F14T5
2, 3, 4 or 6/T5HO: F24T5HO*
2/T8U6: T8 6” U-Lamp
1 or 2/T8UI: T8 1.6” U-Lamp
2, 3, 4 or 6/T8: F32T8
2, 3, 4 or 6/T5: F28T5
2, 3, 4 or 6/T5HO: F54T5HO*
F: FLANGED
G: GRID
S: SURFACE
2x2: 2’ x 2’ Housing
2x4: 2’ x 4’ Housing
Voltage
Lens: Lamp Side/Lens Side
Options
120V
1: .125” Prismatic Polycarbonate
2: .140” P12 High Impact Acrylic
3: .187” Prismatic Polycarbonate
4: .156 Prismatic Tempered Glass
5: .125 Clear Polycarbonate
6: .187 Clear Polycarbonate
7: .250 Clear Polycarbonate
FF: Fuse & Holder
FD: Double Fuse & Holders
2/EB: Two Ballasts, (Two Circuits)
EBPRS: Program Rapid Start Ballast*
EBDIM: Electronic Dimming Ballast*
AH: Allen Head Tamper Resist fasteners
1/EM: 1 Lamp Battery Pack (700L)
2/EM: 1 or 2 Lamp Battery Pack (1400L)*
WHT: White Finished Stainless Steel
277V
UNV
347V
(Only specify one layer of prismatic lenses)
ORDERING INFORMATION
VL
___/T___
___V
____/____
* Not all options are compatible with other options. Consult factory for additional choices & options marked. Ω = CRS housings are only available for surface mount.
Although KURTZON has prepared the information contained in this document with all due care, KURTZON does not warrant or represent that the information is free from errors or omission. Whilst the information is considered to be
true and correct at the date of publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The information may change without notice and KURTZON is not in any way liable for
the accuracy of any information printed and stored or in any way interpreted or used.
The VANDAL-LOCK Series : An investment that protects itself.
THE FUTURE OF LIGHTING
S P E C I F I C A T I O N
G R A D E
Kurtzon Lighting Inc.
1420 S. Talman Avenue
Chicago, IL 60608
Telephone 800-837-8937
www.Kurtzon.com
Download