HL20
Haz-Lock Series
1x4 Luminaires for Recessed Flange Installation
Class I, II & III Division 2, Group A, B, C, D, F & G
Specifications:
Project:
Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or
aluminum construction. Fully white powder coated.
Fixture Type:
Door Frame: One-piece 18-gauge CRS or 20-gauge type 304 stainless steel door
frame with 90° bevelled edges. Door frame suspended from housing by two 8”
stainless steel aircraft cables. Secured by 12 captive stainless steel screws. See Options for 1700 PSI rating (HD-1700).
Cross Section
Yoke (Optional)
Toggle Arms
(Standard)
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™
with vulcanized corners making a one-piece acid, alkali, oil and solvent resistant
gasket system.
4.50”
12.75” x 49.25”
Reflector: Die formed metal with high reflectance white polyester powder coat
finish. (minimum reflectivity 88%)
Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern. See
“Options” for other choices.
Ceiling Cutout
Lamps: Select lamp options listed below. Lamps supplied by others.
48.5”
Electrical: Standard ballast - Electronic less than 10% THD high performance
instant start universal voltage (120-277 volt). See options for other choices.
12.0 "
Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat fin-12.0”
ish standard for all housings. Stainless steel doorframes are satin polished unless
option WHT is chosen.
Installation: Adjustable toggle arm mounting standard. See Options for yoke
mounting system (YOKE). Four .875” flattened and silicone sealed knockouts
for wiring.
Listings: UL and CUL Listed for Wet and Hazardous Locations. Class I, II &
III Division II, Groups A, B, C, D, F & G Listing (X12 & X22). Dust and water
resistance rated IP-65. IBEW Label. Made in the USA.
Note: This fixture is not suitable for T-Bar Grid ceiling systems.
Ordering Information:
HL
- FDF
-
Series Installation Type
-
Material
-
Size
-
Lamps
Voltage
Options
HL
FDF = Flanged Recessed
1 = CRS Hsg, & CRS Door
120V
Qty/Type
(for Drywall or Plaster)
2 = CRS Hsg. & SS Door
277V
3 = SS Hsg. & SS Door 347V*
1x4 = 1'x4’ Housing
Standard
Standard
1, 2 or 3/T8 = F32T8 32W T8 (G13) (T-Code= T4A)
Optional
Optional
IP IP
64 65
IEC 60529
IEC 60529
WET LOCATION
WET LOCATION
HOSE DOWN
85
PSI
RATED
Kurtzon Lighting / Innovators in Lighting Since 1898
H/FF = Hazardous Fuse & Holder
H/FD = Two Hazardous Fuses & Holders
2/EB = Two Ballasts, (Two Circuits)*
EBL = -20°F Electronic Ballast*
EBPRS= Program Rapid Start Ballast*
H/EM = 1 Lamp Battery Pack (700L)*
H2/EM = 2 Lamp Battery Pack (1300L)*
TP = Stainless Steel Tamperproof Fasteners
HD1700 = 1700 P.S.I. Hosedown
WHT= White Finished Stainless Door
LEX = .125” Prismatic Polycarbonate
PA= Prismatic P12 Pattern Clear Acrylic*
A19= Prismatic P19 Pattern Clear Acrylic
HIA= High Impact P12 Pattern Acrylic
TG= Prismatic (C73) Tempered Glass
PF= Plaster Frame (For wet plaster ceilings)
YOKE= Yoke Mounting System
* Note: Not all options are compatible with every
option. Ex: EBPRS is not Compatible with EBL.
Consult factory for multiple options marked "*".
Morris Kurtzon, Incorporated
1420 South Talman Avenue, Chicago, Illinois 60608
773/277-2121 FAX 773/277-9164 © 2011
www.kurtzon.com