NZQA Expiring unit standard
2525 version 9
Page 1 of 3
Title
Manufacture shaped windows
Level
5
Credits
15
Purpose
People credited with this unit standard are able to: set out
shaped window; machine window frame and sash material;
assemble sashes and frames.
Classification
Joinery > Door and Window Joinery
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
3
Reference
NZS 3610:1979, Specification for profiles of mouldings and joinery; available from
http://www.standards.co.nz.
Outcomes and evidence requirements
This unit standard is
Set out shaped window.
expiring
Outcome 1
Evidence requirements
1.1
Window matches working drawings.
1.2
Timber profiles are determined from the working drawings or NZS 3610 and an
order list is prepared in accordance with workplace practice.
1.3
The window frame is set out to conform to the working drawings and a cutting
list is prepared in accordance with workplace practice.
Outcome 2
Machine window frame and sash materials.
Evidence requirements
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2.1
2525 version 9
Page 2 of 3
The timber is run to the profiles detailed on the working drawings or to NZS
3610.
includes but is not limited to – built-up, laminated.
Range
2.2
Joints are worked to working drawings or in accordance with workplace
practice.
2.3
Surfaces are finished as specified in accordance with workplace practice.
Outcome 3
Assemble sashes and frames.
Evidence requirements
3.1
The window sashes are assembled and finished in accordance with workplace
practice.
3.2
The window frames are assembled and finished in accordance with workplace
practice.
Replacement information
This unit standard, unit standard 2518, unit standard
2519, unit standard 2520, unit standard 2523, unit
standard 2524, and unit standard 2542 have been
replaced by unit standard 28218.
This unit standard is
Status information and last date for assessment for superseded versions
Process
Version Dateexpiring Last Date for Assessment
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Registration
1
16 August 1995
31 December 2018
Review
2
16 August 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Revision
4
21 October 1997
31 December 2018
Revision
5
20 December 1999
31 December 2018
Revision
6
16 June 2005
31 December 2018
Review
7
23 January 2009
31 December 2018
Review
8
24 October 2014
31 December 2018
Rollover
9
17 September 2015
31 December 2018
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2525 version 9
Page 3 of 3
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016