NZQA Expiring unit standard
2530 version 10
Page 1 of 2
Title
Manufacture special fitments
Level
4
Credits
6
Purpose
People credited with this unit standard are able to manufacture
special fitments.
Classification
Joinery > Cabinetry
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
3
Definition
fitment refers to any item that is not part of the base joinery work.
Outcomes and evidence requirements
Outcome 1
This unit standard is
Evidence requirements
expiring
Manufacture special fitments.
1.1
The units are identified from the working drawings, material quantities are
calculated and an order is placed in accordance with workplace practice.
1.2
The units are set out to conform to the working drawings and workplace
practice.
1.3
The units are machined, assembled, and finished to conform to the set-out and
specifications.
1.4
Attachments are fitted as detailed on the working drawings.
1.5
Protective measures to ensure workplace safety are employed in accordance
with workplace practice.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
Replacement information
2530 version 10
Page 2 of 2
This unit standard, unit standard 25600, and unit
standard 25601 have been replaced by unit standard
28216.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Revision
2
24 October 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Review
4
16 August 1995
31 December 2018
Revision
5
21 October 1997
31 December 2018
Revision
6
20 December 1999
31 December 2018
Revision
7
16 June 2005
31 December 2018
Review
8
23 January 2009
31 December 2018
Review
9
24 October 2014
31 December 2018
Rollover
10
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
This unit standard is
expiring
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016