NZQA Expiring unit standard
2524 version 9
Page 1 of 3
Title
Manufacture special windows
Level
4
Credits
8
Purpose
People credited with this unit standard are able to: set out
windows; machine window frame and sash materials; and
assemble sashes and frames.
Classification
Joinery > Door and Window Joinery
Available grade
Achieved
Explanatory notes
1
Reference
NZS 3610:1979, Specification for profiles of mouldings and joinery; available from
http://www.standards.co.nz.
2
Range
may include but is not limited to – fixed glazed, louvre, pivot, sliding/folding and
double-hung windows and shutters;
evidence is required of one.
3
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
This unit standard is
expiring
Outcomes and evidence requirements
4
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
Outcome 1
Set out windows.
Evidence requirements
1.1
Window matches the working drawings.
1.2
Timber profiles are determined from the working drawings or NZS 3610.
1.3
The window frame set-out conforms to the working drawings and an order list is
prepared in accordance with workplace practice.
1.4
A cutting list is prepared in accordance with workplace practice.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2524 version 9
Page 2 of 3
Outcome 2
Machine window frame and sash materials.
Evidence requirements
2.1
The timber is run to the profiles detailed on the working drawings or NZS 3610.
2.2
Joints are worked to working drawings or in accordance with workplace
practice.
2.3
Surfaces are finished as specified in accordance with workplace practice.
Outcome 3
Assemble sashes and frames.
Evidence requirements
3.1
The window sashes are assembled and finished in accordance with workplace
practice.
3.2
The window frames are assembled and finished in accordance with workplace
practice.
Replacement information
This unit standard, unit standard 2518, unit standard
2519, unit standard 2520, unit standard 2523, unit
standard 2525, and unit standard 2542 have been
replaced by unit standard 28218.
This unit standard is
This unit standard is expiring. Assessment against the standard must take place by
expiring
the last date for assessment set out
below.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2524 version 9
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Review
2
16 August 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Revision
4
21 October 1997
31 December 2018
Revision
5
20 December 1999
31 December 2018
Revision
6
16 June 2005
31 December 2018
Review
7
23 January 2009
31 December 2018
Review
8
24 October 2014
31 December 2018
Rollover
9
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
This unit standard is
expiring
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016