NZQA Expiring unit standard
2526 version 9
Page 1 of 3
Title
Order and install window hardware
Level
4
Credits
4
Purpose
People credited with this unit standard are able to order window
hardware, and install window hardware.
Classification
Joinery > Door and Window Joinery
Available grade
Achieved
Explanatory notes
1
Reference
NZS 3610:1979, Specification for profiles of mouldings and joinery; available from
http://www.standards.co.nz.
2
Range
may include but is not limited to – hinged, awning, double-hung, louvre,
sliding/folding, sliding, pivot;
evidence is required of one.
3
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
4
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992; Health and Safety in Employment
Regulations 1995.
This unit standard is
Outcomes and evidence requirements
expiring
Outcome 1
Order window hardware.
Evidence requirements
1.1
The type of hardware is identified from the job specifications.
1.2
An order is prepared in accordance with workplace practice.
Outcome 2
Install window hardware.
Evidence requirements
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2526 version 9
Page 2 of 3
2.1
The hardware is installed in accordance with the job and manufacturer's
specifications.
2.2
The hardware is adjusted so that window fulfils its intended function in
accordance with workplace practice.
2.3
Hardware maintenance procedures are followed as detailed in the job
specifications.
Replacement information
This unit standard and unit standard 2521 have been
replaced by unit standard 28219.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2018
Review
2
16 August 1995
31 December 2018
Review
3
16 August 1995
31 December 2018
Revision
4
21 October 1997
31 December 2018
Revision
5
20 December 1999
31 December 2018
Revision
6
16 June 2005
31 December 2018
Review
Review
Rollover
8
24
October 2014
31 December
This
unit
standard
is2018
9
17 September 2015
31 December 2018
expiring
7
23 January 2009
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2526 version 9
Page 3 of 3
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016