NZQA unit standard 10111 version 6

advertisement

NZQA Expiring unit standard

Title

10111 version 6

Demonstrate knowledge of printing faults in the corrugated packaging industry

Page 1 of 3

Level

Purpose

3 Credits 12

People credited with this unit standard are able to: identify printing faults and describe their causes; and demonstrate knowledge of the actions required to rectify printing faults.

Classification

Available grade

Fibreboard Packaging > Corrugated Case Converting

Achieved

Explanatory notes

1 All workplace practices must meet any applicable and recognised codes of practice, and documented workplace health, safety, and environmental procedures for personal, product, workplace health, safety, and environmental matters, and the obligations required under current law including the Health and Safety in Employment

Act 1992, Hazardous Substances and New Organisms Act 1996, Resource

Management Act 1991, Privacy Act 1993 and their subsequent amendments.

2 Workplace practices refer to the documented procedures for the machine and/or workplace.

3 The publication Corrugating Defect/Remedy Manual , editor James T. Carbone,

TAPPI Press, Atlanta USA, Sixth edition 1999 is the standard for fault types and remedies for this unit standard.

Outcomes and evidence requirements

Outcome 1

Identify printing faults and describe their causes.

Evidence requirements

1.1 Printing faults are identified from physical samples or photographs or diagrams.

Range ink smear or ink smudge, uniformly incorrect colour shade, halo, print out of register or print askew, missing print, poor definition, printing crush, uneven ink coverage, image distortion, ink fill in, poor trapping, dirty printing, colour shade variations.

Competenz

SSB Code 101571

New Zealand Qualifications Authority 2020 New Zealand Qualifications Aut

NZQA Expiring unit standard

1.2

10111 version 6

A minimum of two causes are described for each fault ranged at 1.1.

Page 2 of 3

Range the causes provided are those most often experienced in the workplace.

Outcome 2

Demonstrate knowledge of the actions required to rectify printing faults.

Evidence requirements

2.1 A minimum of one corrective action to rectify each fault cause given at 1.2 is described.

Range the corrective actions provided are those most often undertaken in the workplace.

Replacement information This unit standard, unit standard 10103, and unit standard 10104 have been replaced by unit standard

27781.

This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.

Status information and last date for assessment for superseded versions

Process Version Date Last Date for Assessment

Registration 1 18 February 1998 31 December 2015

Revision

Review

Rollover and

Revision

2

3

4

27 March 2001

27 April 2005

12 December 2008

31 December 2015

31 December 2015

31 December 2015

Review 5 20 September 2012 31 December 2019

Rollover 6 10 December 2015 31 December 2019

Consent and Moderation Requirements (CMR) reference 0005

This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do

.

Please note

Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be granted consent to assess against standards by

NZQA before they can register credits from assessment against unit standards.

Competenz

SSB Code 101571

New Zealand Qualifications Authority 2020 New Zealand Qualifications Aut

NZQA Expiring unit standard 10111 version 6

Page 3 of 3

Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.

Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The

CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Competenz

SSB Code 101571

New Zealand Qualifications Authority 2020 New Zealand Qualifications Aut

Download