NZQA Expiring unit standard
1043 version 10
Page 1 of 3
Title
Produce computer generated vinyl layouts and graphics for
signmaking
Level
3
Credits
Purpose
10
This unit standard is for people in the signmaking industry.
People credited with this unit standard are able to access
signmaking industry software for computer generated vinyl
layouts and graphics, and cut the letters using industry
software.
Classification
Graphic Arts > Signmaking
Available grade
Achieved
Explanatory notes
None.
Outcomes and evidence requirements
Outcome 1
Access signmaking industry software for computer generated vinyl layouts and graphics.
This unit standard is
Computer system is operated in accordance with operating manual.
expiring
Industry software package
is run in accordance with software manual.
Evidence requirements
1.1
1.2
Outcome 2
Cut the letters using industry software.
Evidence requirements
2.1
Grade of vinyl is selected according to job specification.
2.2
Graphics are produced to job specification on monitor by use of function
commands or pen.
Range
Competenz
SSB Code 101571
includes but is not limited to – font select, letter height, half-font,
spacing, letter slant, auto kern, length, scale factor, centre justify,
reverse swap, left/right justify.
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
2.3
Graphics and letters are cut by use of the identified function commands.
includes but is not limited to – speed, arc/rotate, x-y move, auto
number, border.
Range
2.4
1043 version 10
Page 2 of 3
Design is saved for future use as instructed by on-screen menu and according
to company policy.
Replacement information
This unit standard, unit standard 1046, and unit standard
20193 have been replaced by unit standard 27574.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
27 April 1995
31 December 2014
Review
2
25 March 1996
31 December 2014
Revision
3
31 January 1997
31 December 2014
Revision
4
9 March 1999
31 December 2014
Revision
5
12 December 2000
31 December 2014
Review
6
16 December 2003
31 December 2014
Rollover and
Revision
7
23 January 2009
Review
Reinstatement
Rollover
31 December 2014
8
19
January 2012
31 December
This
unit
standard
is2014
9
16 April 2015
31 December 2019
10
10 December
expiring
2015
31 December 2019
Consent and Moderation Requirements (CMR) reference
0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1043 version 10
Page 3 of 3
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016