NZQA Expiring unit standard
1042 version 10
Page 1 of 3
Title
Prepare, cut out, and install dimensional signage
Level
3
Credits
Purpose
10
This unit standard is for people in the signmaking industry.
People credited with this unit standard are able to: prepare the
layout for dimensional signage; cut out the letters for
dimensional signage; install the letters for dimensional signage;
and complete the project.
Classification
Graphic Arts > Signmaking
Available grade
Achieved
Explanatory notes
None.
Outcomes and evidence requirements
Outcome 1
Prepare the layout for dimensional signage.
Evidence requirements
1.1
1.2
1.3
This unit standard is
Client approval of sketched visual is obtained prior to commencement of work.
expiring
Job requirements are determined by analysis of client brief.
Substrate selected for letter construction complies with job specification.
Range
1.4
examples include but are not limited to – metal, plastic, timber,
glass, cloth, plastic products, stone, polystyrene.
Letters are transferred to substrate to comply with job specifications.
Outcome 2
Cut out the letters for dimensional signage.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1042 version 10
Page 2 of 3
Evidence requirements
2.1
Cutting method selected is suitable for substrate material.
Range
examples include but are not limited to – jigsaw, router, laser,
water jet, hot wire, hand tool, cutting for casting.
2.2
Letters are created to job specification and to meet company quality control
requirements.
2.3
Finishing is completed suitable for material of letters.
Range
examples include but are not limited to – sand, fill, seal, prime,
paint, polish, anodise, chrome, clear coat.
Outcome 3
Install the letters for dimensional signage.
Evidence requirements
3.1
Position of letters when installed complies with job specification.
3.2
Fixing method for letters is compatible with background material.
Range
examples include but are not limited to – glue, adhesive tape, pins,
hook and loop tape, concealed fasteners.
Outcome 4
Complete the project.
This unit standard is
Presentation of finished installation complies with job specification and company
quality control standards.expiring
Evidence requirements
4.1
4.2
Site is left in a clean and tidy condition as specified in the contract.
4.3
Work is completed to client satisfaction.
Replacement information
This unit standard, unit standard 1055, and unit standard
1058 have been replaced by unit standard 27577.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1042 version 10
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
27 April 1995
31 December 2014
Review
2
25 March 1996
31 December 2014
Revision
3
31 January 1997
31 December 2014
Revision
4
9 March 1999
31 December 2014
Revision
5
12 December 2000
31 December 2014
Review
6
16 December 2003
31 December 2014
Rollover and
Revision
7
23 January 2009
Review
8
19 January 2012
31 December 2014
Reinstatement
9
16 April 2015
31 December 2019
Rollover
10
10 December 2015
31 December 2019
31 December 2014
Consent and Moderation Requirements (CMR) reference
0005
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
This unit standard is
Requirements for consent to assessexpiring
and an outline of the moderation system that applies
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016