NZQA Expiring unit standard
26036 version 2
Page 1 of 3
Title
Create computerised programmes for glass processing machines
Level
5
Credits
Purpose
8
This is a specialist unit standard for people in the glass
processing industry.
People credited with this unit standard are able to create
computerised programmes for glass processing machines.
Classification
Glass and Glazing > Flat Glass
Available grade
Achieved
Explanatory notes
1
Definitions
Worksite requirements – refer to instructions to staff on policy and procedures which
are documented in memo or manual format and are available in the workplace.
These requirements include but are not limited to – company specifications and
procedures, work instructions, manufacturer’s specifications, product quality
specifications, legislative requirements.
CNC – refers to Computer Numerically Controlled machines.
2
All work to be done in accordance with the requirements of the Health and Safety in
Employment Act 1992 and Resource Management Act 1991.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
26036 version 2
Page 2 of 3
Outcomes and evidence requirements
Outcome 1
Create computerised programmes for glass processing machines.
Range
includes but is not limited to – CNC edgeworking machine, waterjet, CNC
drilling machine, automatic glass cutting machine, digital printing machine.
Evidence requirements
1.1
Processes for creating a computerised programme are completed in
accordance with job specifications and worksite requirements.
processes may include but are not limited to – drawing glass
shape, selecting or modifying existing shapes, loading pre-drawn
Computer Aided Design file, using digitiser to create shape file,
using machine sensor to create shape file;
evidence of a minimum of two is required.
Range
1.2
Machines are programmed to ensure that the job specifications and worksite
requirements are met.
programming requirements may include but are not limited to –
tool and wheel selection, thickness of the glass, speed, wheel
pressure, edge type and finish, bevel width and angle, residual
edge, V cut size, triple edge, special profiles, water pressure,
nozzle size.
Range
This unit standard is
Status information and last date for assessment for superseded versions
Process
Version Dateexpiring Last Date for Assessment
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Registration
1
21 May 2010
31 December 2017
Review
2
18 June 2015
31 December 2017
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
26036 version 2
Page 3 of 3
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016