9939 version 4
Page 1 of 4
Build boat frameworks in timber
Level
4
Credits
20
Purpose
People credited with this unit standard are able to: construct a building jig or
set up a building floor for building boat frameworks in timber; manufacture
framework members; install and secure framework members; and fair the
members and framework.
This unit standard is applicable to the construction of boats to be finished in
timber and/or fibre-reinforced composites (FRC).
Subfield
Boating Industries
Domain
Boatbuilding
Status
Registered
Status date
21 November 2008
Date version published
21 November 2008
Planned review date
31 December 2013
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
All required equipment must be set up, started up, operated, and shut down in
accordance with company procedures.
2
All work practices must meet recognised codes of practice and documented worksite
health and safety procedures (where these exceed code) for personal, product, and
worksite health and safety, and must meet the obligations required under the Health
and Safety in Employment Act 1992, and subsequent and delegated legislation.
 New Zealand Qualifications Authority 2016
9939 version 4
Page 2 of 4
3
All work practices must meet recognised codes of practice and documented worksite
environmental procedures (where these exceed code) for personal, product, and
worksite environmental matters, and must meet the obligations required under the
Resource Management Act 1991, and subsequent and delegated legislation.
4
All work practices must meet documented worksite quality management
requirements. These include documentation of activities, events, and decisions.
5
Definitions
Company procedures, documented or accepted procedures in the workplace where
the unit standard is being assessed.
FRC, (fibre reinforced composite) means glass sheathing that may be non-structural
on outside only or may be structural glass on the inside and outside of a hull.
Job requirements, requirements that may or may not be specified but require correct
choices to achieve including: following safety and workplace procedures and meeting
generally accepted trade practice standards.
Job specifications, either written or verbal definition of the job used for assessment.
Elements and performance criteria
Element 1
Construct a building jig or set up a building floor for building boat frameworks in timber.
Performance criteria
1.1
Building floor or jig is confirmed as being able to support the weight of the
intended construction and associated equipment.
1.2
Building floor or jig is confirmed as being able to accommodate the size of the
intended construction and temporary frames at the required intervals.
1.3
Building floor or jig is marked to job requirements for the installation of
framework members.
Element 2
Manufacture framework members.
Range
examples of framework members include – keels, transoms, kelsons, floors,
bulkheads, stringers, and chines.
Performance criteria
2.1
Materials selected meet job specifications and requirements of the intended
use.
Range
specifications and requirements – moisture content and
straightness of timber, permanent or temporary nature of the
member.
 New Zealand Qualifications Authority 2016
9939 version 4
Page 3 of 4
2.2
Manufactured members meet job specifications for shape and size.
2.3
Members are finished to job requirements.
Range
finish – sanding, radius of edges.
Element 3
Install and secure framework members.
Performance criteria
3.1
Members are installed so that fair lines can be achieved in accordance with job
specifications.
3.2
Temporary members are secured so that they can be removed in accordance
with job requirements.
3.3
Members are secured in accordance with job requirements.
Range
glued, screwed, nailed.
Element 4
Fair the members and framework.
Performance criteria
4.1
Selection and production of battens enables fair lines to be established to job
specifications.
4.2
Fairness is established for the whole framework.
4.3
The outside face of the completed framework is within job specifications and
tolerances for fair lines.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
 New Zealand Qualifications Authority 2016
9939 version 4
Page 4 of 4
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016