DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a trimless opening suitable for
downlighting and accent applications. Utilizes T4 G8.5 Metal Halide lamps in 1 - 6
light configurations.
For new construction applications. Insulation must be kept 3” (76mm) from all
sides and at least 1” (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
Housing and Plaster Frame Assembly:
18 gauge CRS. J-Box Assembly: 16
gauge CRS (galvanized). One piece
plasterframe construction for added
stability. Perforated mesh plaster frame
adheres to ceiling compound for seamless
trimless installation in drywall ceilings.
Beveled fixture opening provides easy
mudding compound application. Can
accommodate 0.50” (13mm) to 1.25”
(32mm) ceiling thickness.
System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing allow greater airflow.
Junction Box
Junction box is UL listed for through
branch wiring, (access above ceiling not
required) for 8 #12, 90°C supply conductors. J-Box located on plaster frame with
easy below-ceiling access.
Electrical
Integral electronic metal halide ballasts accessible through ceiling opening.
Lamps
One, two, three, four, five, or six T4 G8.5
lamps mounted in standard yokes. Lamp
can accept optical accessories. 380º x 45º
locking lamp adjustment. Includes G8.5
base sockets. Lamps not included.
Reflectors
This fixture utilizes T4 Metal Halide lamps
and includes high-performance clear
aluminum reflectors in narrow, medium, or
wide distributions.
A
B
C
D
25.31” 6.65” 6.50” 12.13” 8.76”
643
169
165
308
223
CO2
33.05” 14.19” 6.50” 12.13” 8.76”
839
360
165
308
223
CO3
39.90” 21.04” 6.50” 12.13” 8.76”
1013 534
165
308
223
CO4
46.75” 27.89” 6.50” 12.13” 8.76”
1187 708
165
308
223
1, 2, 3, 4, 5, or 6 Light
T4 G8.5 Metal Halide
New Construction
Recessed Housing
Trimless
Electrical Wiring Compartment
accessible through fixture opening
A
Removable Electrical
Maintenance Doors
(both ends)
Metal Halide
Ballast
Metal Halide
Ballast
E
Trimless
Detail
Ceiling mudding
compound is applied Thermal
Protector
directly to the edge
of the aperture.
B
380º x 45º locking adjustment
6.85”
CO5
59.10” 34.74” 6.50” 12.13” 8.76”
1501 882
165
308
223
CO6
65.90” 41.59” 6.50” 12.13” 8.76”
1673 1056 165
308
223
COX
33.05” 13.38” 13.50” 18.98” 8.76”
839
340
343
241
223
CO SERIES
Recessed Multi-Lamp
Fixture
Ceiling Cut-Outs
CO1 = 9.76” x 9.75”
CO2 = 9.76” x 17.49”
CO3 = 9.76” x 24.34”
CO4 = 9.76” x 31.19”
CO5 = 9.76” x 38.04”
CO6 = 9.76” x 44.84”
COX = 17.49” x 16.61”
D
E
CO1
COMBOLIGHT®
Mounting
Butterfly Brackets accept 1/2” EMT, C
Channel, Tbar fasteners, and bar hangers.
Dimensions in inches / mm
Config.
Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
6.85”
174mm
174mm
Butterfly
Brackets
for Black Iron
Mounting
C
ORDERING INFORMATION
N
Housing
Configuration
N = New Construction
CO1 = One (1) Light
CO2 = Two (2) Light
CO3 = Three (3) Light
CO4 = Four (4) Light
CO5 = Five (5) Light
CO6 = Six (6) Light
COX = Four (4) Light Sq.
www.cooperlighting.com
E
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Type / Wattage
039T4N = 39 Watt T4 G8.5 Metal Halide / Narrow
039T4M = 39 Watt T4 G8.5 Metal Halide / Medium
039T4W = 39 Watt T4 G8.5 Metal Halide / Wide
070T4N = 70 Watt T4 G8.5 Metal Halide / Narrow
070T4M = 70 Watt T4 G8.5 Metal Halide / Medium
070T4W = 70 Watt T4 G8.5 Metal Halide / Wide
N
Power Supply Voltage
1 = 120V
2 = 277V
4 = 240V
Yoke
Y = Standard Yoke
R = Retractable Yoke
D = Double Gimbal
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior
Finish
W = White
B = Black
S = Industrial Silver
Installation
N = Trimless
rev 100710