Name
Period
CCNA 2
Chapter 3 Study Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Section
Question/Topic
Answer
3.1.1 Site
Survey
3.1.1 Site
Survey
3.1.1 Site
Survey
3.1.2 Physical
and Logical
Topologies
3.1.3 Network
Requirements
Documentation
Issues that should be noted on the technician's site survey report

Tasks should the onsite technician should perform when designing a
network upgrade
The importance of reviewing the results of an on-site survey report with the
customer before beginning the network design
Things included in a logical topology document

3.2.1 Network
Upgrade
Planning
Phases
3.2.2 Physical
Environment
3.2.2 Physical
Environment
3.2.2 Physical
Environment
3.2.2 Physical
Environment
3.2.3 Cabling
Considerations
3.2.3 Cabling
Considerations
3.3.1
Purchasing
Equipment
3.3.1
Purchasing
Equipment
3.3.3 Selecting
LAN Devices
3.3.4 Selecting
Internetworking
Devices
3.3.4 Selecting
Internetworking
A network technician is assigned to perform a site visit to a customer
location to determine the requirements for a network upgrade. The
technician should also obtain information from the customer about the
hosts and networking devices including ________, in addition to the
currently installed equipment inventory.
Procedures that describe the selection and design phase components of
the upgrade process when a manufacturing company is in the process of a
network upgrade.
Must be added when a network expands beyond the coverage area of the
current telecommunications room
Three items are typically found in an MDF?
Benefits that can be gained by locating network equipment in a
telecommunications closet, rather than in a user area
The term for the location at the customer premise where the customer
network physically connects to the Internet through a telecommunications
service provider
Type of cable that has a solid copper core with several protective layers
including PVC, braided wire shielding, and a plastic covering
Refer to the exhibit. Name the types of twisted pair cables used between
each device.
Two advantages of having ISP-managed services.
Two ways entering into a managed service agreement with an ISP for a
network upgrade that will affect the costs that are incurred by the customer
A client requires a networking device that is capable of expansion to
accommodate growing network demands. This device must have what
characteristic to meet the requirement?
Which device has the ability to break up broadcast and collision domains?
Benefit for a company to use an ISR router






18
19
20
Devices
3.3.4 Selecting
Internetworking
Devices
3.3.6 Design
Considerations
3.3.6 Design
Considerations
Refer to the exhibit. To allow IP communication between the two networks,
this type of device is required
The use of redundant network components supply ______ to a network.
What is meant by "five-9s" in terms of the goal for availability of a
communications system?