Mikrotik router setup Manual If there have been previous setups, then: Press and hold RES button on the router, Keep it pressed, disconnect and reconnect the routers power source, Keep it pressed for about 5 seconds till action led on router starts blinking, Now routers configuration - default. Connect to router - in web browsers address bar – 192.168.88.1 In window that opens user – admin, without password Choose winbox Open winbox program Connect to: from IP Address column choose MAC address (that one with letters) Next field – admin, then Connect Opens widow that offers to setup default configuration. Router will work with it. To configure it by yourself – Remove configuration After some changes connection with router will be lost. Just reconnect using Winbox. Interfaces Open ether1 and give it a name. - OK Select wlan1 – turn it on Bridge – add a bridge Add ports to bridge IP – Addresses. IP - DHCP Server Give IP’s for WAN and LAN DHCP setup – select interface at which DHCP will work - next Write in Address space - next LAN’s gateway - next Address pool - next DNS server IP – 8.8.8.8 – google dns server - next IP lease time - next - DHCP server setup finished IP – Routes Show gateways IP that gives internet IP – FIREWALL – NAT tab – Add In general tab – Chain – srcnat In action tab Action – src-net, To Addresses – WAN address Access router just from LAN IP – FIREWALL - Filter Rules – Add General tab Chain – Input, In.Interface - WAN Change user password System – Users Double click admin – Password - to set password Remove – to delete user Add to create new user Groups tab – you can create groups and set their permissions.