Fujikura Fusion Splicer (FSM-60S)
Product Description
Fujikura fsm-60s is the top brand in the world, hot in stock!
Specification:
1)Dual monitor position with automatic image orientation
2)Automatic arc calibration and fiber identification
3)Long life battery (up to 160 splice/heat cycles per charge)
4)Green friendly -RoHS & WEEE compliant
5)Typical Average Splice Loss: 0.02dB with SM, 0.01dB with MM, 0.04dB with DS,
0.04dB with NZDS
6)Splicing Time Typical 9 seconds with standard single-mode fiber.
Sumitomo TYPE-65M8
The Type-65 sets a new standard for reduced size and weight, and is designed for
complete portability. Battery operated, the splicer allows more than 20 splices per
battery charge including heater operation. With 30 mph wind protection and a compact
size, it can splice in any environment.
Utilizing precision v-groove alignment, the Type-65 can be used for all types of ribbon
and single splicing with an optimum arrangement for ease of use in aerial and tautsheath applications. A newly developed fiber viewing system simultaneously focuses up
to 12 fibers at a time and maintains equal size and resolution across all fibers for
improved accuracy of splice loss estimations. The high-speed, high-resolution image
processing system automatically evaluates the fibers in two planes (X and Y-axis) for
cleave end face quality, cleave length irregularity, and fiber offset to screen out the most
likely causes in high loss splices. The Type-65 also has programmable power
management functions for longer battery operation, a large color monitor, one of the
fastest built-in fiber protection sleeve heaters available, and ultra-fast 30 second mass
splicing!
Sumitomo TYPE-37SE
The Sumitomo Type-37SE Micro-Core is a lightweight, portable, fully automatic,
self contained instrument for creating low-loss optical fiber splices. It features a
user friendly software package with on-screen operation instructions that help
simplify training requirements. It is highly portable at only 9.0 lbs and can receive
power via an internal AC power module or internal 12V DC battery module. The
Type-37SE splicer automatically aligns a pair of optical fibers in both the X and Y
(horizontal and vertical) planes and then fuses them together with heat from an
electric arc to form a low-loss splice. HDCM (High resolution Direct Core
Monitoring) image processing software in the splicer is used to perform core
alignment and estimates the splice loss. The operation can be performed in as
little as 11 seconds with an average splice loss of 0.02 decibels(dB) for identical
single-mode fibers.
Exfo Axs-100 Handheld OTDR
Product Description
1, 850, 1300, 1310 and 1550 nm wavelengths, with respective dynamic ranges of
and 30 dB
2, Unrivaled event dead zone of 0.8 m
3, Top user-friendliness: One-touch testing, summary screen, macro bend
4, USB stick compatibility and USB cable data download
5, Large internal memory (up to 500 results)
24, 25, 32
finding
Pon Power Meter (EXFO PPM-350C)
Product Description
Exfo pon power meter ppm-350c
Specification:
1)Simultaneous measurement of all PON signals*, anywhere on the network.
2)Store up to 1000 test results, which are downloadable through its USB interface.
3)Quick and Efficient Visual Inspection.
4)Automated Pass/Warning/Fail Assessment.
5)Rugged and Weatherproof Design.
6)Complementary Products: AXS-110 OTDR, FIP-400 FIBER INSPECTION PROBE, FOT-930
Multifunction Loss Tester.
Product Description
1) Multifunctional light source: Up to three singlemode wavelengths on a single port, or four
wavelengths (two multimode, and two singlemode) on two ports Auto-Wavelength
Recognition
2) Power autonomy of 120 hours
3) Three-year warranty and recommended calibration interval
4) Distant Referencing
5) FTTX Ready: 1310 nm, 1490 nm and 1550 nm recommended by the ITU-T (G. 983.3) for
PONs.
6) Ergonomic, eye-catching handheld package
Deluxe Fiber Optic Cleaning Kit with 200X Inspection Scope FHW-750C
Product Description
Deluxe Fiber Optic Cleaning Kit with 200X Inspection Scope FHW-750C
FHW-750C inspection and cleaning kit provides a field portable solution to the
inspection and cleaning of a ferrule end face. This cleaning tool kits is a good solution
for communication node solution daily maintenance and cleaning, which is special for
different product application and abundant choice for the customers.
Kit Contents:
Part
No.
Description
Q'ty
1
NTT-AT Fiber Connector Cleaner
1
2
Reel of Replacement
1
3
400X Deluxe Inspector Microscope
400XA(2.5mm Universal Adapter)
4
1.25mm Adapter for FHW-200MF
1
5
2.5mm fiber optic cleaning stick
100
6
1.25mm fiber optic cleaning stick
100
7
KimWipes 280pcs/box
1
8
100ml Bottle of Alcohol with locked
1
9
IPA Fiber Cleaning Wipes(Pre-Moistened)
10
10
Pocket Visual Fault Locator (Optional)
1
11
Carrying Tool Case(385×275×110mm)
1
FHW-
1
Fiber Fusion Splicing Tool Kit FHW-6300N
Product Description
Optical Fiber Fusion Splicing Tool Kits
Fiber Fusion Splicing Tool Kit FHW-6300N
This professional tool kit is ideal for optical fiber fusion splicing.
It includes all the most frequently need tools and supplies required for cable sheath
removal and fusion splicing.
Part
Part
Description
Q'ty
Description
Q'ty
No.
No.
1
Fiber optic kevlar
cutter(FKC-1)
1PCS
14
9Pcs Folding type hex key set
(inch)
1PCS
2
Clauss Fiber
Stripper(FCFS-2)
1PCS
15
Screwdriver S/D(-)5×100mm
1PCS
3
Round Cable Slitter
(FHW-315)
1PCS
16
Screwdriver S/D(+)#1×100mm 1PCS
4
Optical Fiber Jacket
Stripper
1PCS
17
Screwdriver S/D(-)6×100mm
5
Wire Rope Cutter
(FHWC-6)
1PCS
18
Screwdriver S/D(+)#2×100mm 1PCS
6
Round Cable Cutter
(FHW-19c)
1PCS
19
4 oz.Bottle of Alcohol
1PCS
7
Carbide fiber
sceibe(FTTK-174A)
1PCS
20
Fiber Cleaning Wipes
1BAG
8
6Pcs Electronic
Screwdriver Set
1PCS
21
Blow Brush (FMS-15C)
1PCS
1PCS
9
7'' Lineman's plier
178mm
1PCS
22
Utility knife(TAJIMA)
1PCS
10
6'' Needle Node Pliers
135mm
1PCS
23
3.5M Tape Measure(TAJIMA)
1PCS
11
6'' Side Cut Pliers
130mm
1PCS
24
Precision tweezer
1PCS
1PCS
25
Black Marker
1PCS
1PCS
26
Carrying Tool
Case(430×330×135mm)
1PCS
12
13
Mini-Hacksaw