Comments on 9tut.com (from 3.3.2009 to 3.6.2009) kk 03-02-2009 to ckwing "all the best " And plz Remember what new Questions are asked in exam ? Bugachi Dai Maru Futai 03-03-2009 Anonymous 03-032009 Anonymous 03-032009 Aziz 03-03-2009 Anonymous 03-032009 taurus 03-03-2009 To taurus 03-03-2009 taurus 03-03-2009 unlucky 03-03-2009 unlucky 03-03-2009 help 03-03-2009 And Share ur experience here...... dear friends i want to know if on the exam i get a multiple choice question and suppose there are 7 options to choose from and 4 correct answers. suppose if i correctly pick 3 but get one wrong-- do i loose the marks for the entire question or i am alloted marks for the 3 correct answers. Also i wanted to know if the passing marks are 825 or 850 for the ccna cisco exam - bcoz my ccna instructor has told me it is 850. Thanks in advance HMM plz tell me the latest ver of p4s i think its out.... I'm not so sure - at the P4S web site it still only says the latest update for the 640-802 Qs and As as being 18 December. I couldn't see anything about 840802 in the updates section either Any 1 knows about the p4s...when it will be updated i hav an exam on 5 march ...plz help me on the ques who has given the exam .... My first attempt for CCNA is on 7th & if God forbid, i flunk... what wud b the last date available for a retake.. is it 31st March!? any idea? @9tut: Do you know or anybody else an url or forum where i can find explained questions and labs like here for the exams: BSCI, BCMSN an the Composite Exam of both (642-892)???!! Thanx in advance Taurus this site delivesre full CCNP and CCIE resources and dumps 9tutor.*.com I can´t find on this site informations about explained questions and labs (Sims) for the exams BSCI, BCMSN an the Composite Exam of both (642-892)???!! Only for the CCNA... , all other is emty! hey anyone know an easy description on what dynamic acl and reflective acl are? Dynamic i kinda understand but reflective ACL have no idea (what does it mean to allow outboard and block inbound?) an example ? thanks all thanks Anonymous for the VLAN input, i have to say the first question is wacko, dont really remember any way mentioned in the cisco study guide on it....hahah...if all questions are like that....i am in deep trouble Q) Identity the 4 valid IPV6 addresses (choose 4) 1) :: 2) ::192:168:0:1 3) 2000:: 4) 2001:3452:4952:2837:: 5) 2002:c0a8:101::42 6) 2003:dead:beef:4dad:23:46:bb:101 Great Website 03-032009 Unlcuky 03-03-2009 K20A 03-03-2009 ad 03-03-2009 portains 03-03-2009 unlucky 03-03-2009 anyone know the correct answer to this question, seeing different answer in this site? someone mentioned NAT lab changed aswell, The NAT lab changed. Instead of creating an ACL, you have to apply the NAT pool to the S0/0 interface. anyone able to clarify? looks strange, should it be apply ACL list to so/o interface? So basically from what I've been reading the P4S is no longer useful? this site is all we have left to use I suppose?? The test king isn't vaild either? i think you should apply ip nat outside command to int serial. This sim is very easy than entire nat configuration. i think what Great Website coments its the next ! int e0/0 ip nat inside ! int s0/0 ip nat outside ! ip nat inside source list 1 interface serial0/0 overload ! access-list 1 permit 192.168.1.0 0.0.0.255 so simple?....good thanks....so main difference is acl to serial0/0 and inside/outside for the interface, anyone who had taken the exam these few days to confirm? K20A 03-03-2009 bugachi dia maru futai 03-03-2009 ritu 03-03-2009 Anonymous 03-032009 just for note, what is the IP NAT outside command for a single inside interface to an single outside interface? This sucks the test has changed. I take it in 13 days. So we have to wait on p4s and testking to update? hey bvk thnks for the link Hi all, i cleared my ccna exams thanx for 9tut, can anybodt tel me where i'm goin to find site like this for MCSE @9tut: Do you know or anybody else an url or forum where i can find explained questions and labs like here for the exams: BSCI, BCMSN an the Composite Exam of both (642-892)???!! On the site "9tutor.*.com" I can´t find informations about explained questions and labs (Sims) for the exams BSCI, BCMSN an the Composite Exam of both (642-892)???!! Only for the CCNA... , all other is emty! Anonymous 03-032009 Anonymous 03-032009 Blah 03-03-2009 Thanx in advance Taurus ritu, What did you use to take the test and pass? bvk, So the TK version you used is still vaild? From pass4sure: Dear sir, We will update within 2 days, please keep attentions. gugu 03-03-2009 Mimo 03-03-2009 unlucky 03-03-2009 Best Regards Q) Identity the 4 valid IPV6 addresses (choose 4) 1) :: 2) ::192:168:0:1 3) 2000:: 4) 2001:3452:4952:2837:: 5) 2002:c0a8:101::42 6) 2003:dead:beef:4dad:23:46:bb:101 anyone know the correct answer to this question, seeing different answer in this site? gugu i think the answers for that question would be 1,2,5,6 hey Mimo, can you explain why 3 and 4 are not correct? so we know the reason behind it gugu 03-03-2009 Anonymous 03-032009 gugu 03-03-2009 thanks hm.. after some reading the valid ones are 1,2,5,6 ok the valid answer is 1 2 5 6, please you can explained the answer ? Thanks! because 3 and 4 are network addresses as far as i read but i could be wrong.. the first one is valid becouse its an all zeroes :: wich meaind Unspecified address Mimo 03-03-2009 * ::/128 — the address with all zero bits is called the unspecified address. This address must never be assigned to an interface and is to be used only in software before the application has learned its host's source address appropriate for a pending connection. Routers must not forward packets with the unspecified address. unlucky i don't know why these are the answers but they were ref to Testking website for me i would say the valid ones are 2,3,4,6 because, - the :: address is the equivalent to ipv4 address 0.0.0.0 ... that's not a valid address - the 2002:c0a8:101::42 i guess it is reserved for the structure that allows IPv6 packets to be transmitted over IPv4 network gugu 03-03-2009 but that's what i think, and still i'm not sure :( more info! the 6to4 address prefix is 2002:836B:1::/48. = six to for tunneling address but does it means that its invalid? :: = from rfc the 2003 isn't there.. so it should be 2, 3 , 4 5 Here's an example collection of IPv6 addresses: unlucky 03-03-2009 great website 03-032009 gugu 03-03-2009 unlucky 03-03-2009 hume 03-03-2009 gugu 03-03-2009 yeager2004 03-032009 ::ffff:cb0a:3cdd fe80::20e:7fff:feac:d687 2001:388:1000:4000:217:f2ff:fec9:1b10 2001:dc0:2001:10:20e:7fff:feac:d687 2001:0:cf2e:308c:0:323d:3fa1:c0b0 2002:cb0a:3cdd:1::1 fc01:3db6:134a:4bb:1217:f2ff:fec9:1b10 ::1 i think it comes down to what they mean by valid (assignable or?), some entry is IPV6 addresses but it may not be used for normal host or interface eg. is :: valid IPv6, some would say yes since it used before host has learned its ip address, so relly not sure does the question specifiy how many correct ans there are? yes, you need to choose four... i'm worried my exam is this Friday hey gugu, we just need to raise more questions here and see if people was participant in the new exam can give more insights To Blah, How did you get contacted by pass4sure? is this true that updates will be within 3days ? you are right! c´mon people !! any news about the exam? @ hume You can email them at cisco@pass4sure.com I asked when the new version would be available but they replied saying "buy the current version and then update for free when it becomes available". Great but not really what I asked! blah 03-03-2009 blah 03-03-2009 Rojas 03-03-2009 On a another note and out of curiosity, does anyone know how P4S, Testking etc. actually get hold of the questions and diagrams? Not that I'm complaining just curious! They told me the update would be "within 2 days" as for how they get the questions, they send people into the exam several times...they do up the questions. They will not give out the new number so dont ask them! Also it states on there site that when the exam is updated they will have the updated version within 2 days, it has been 2 days, the update should be in the next few days hello.. I will be do my exam next friday 6th I'm study P4S and testking v22 about the IPv6 I see only 3 correct answer 1) :: default route 3) 2000:: valid global address 4) 2001:3452:4952:2837:: Global unicast and anycast address explain 2) ::192:168:0:1 - last number one is incorrect represented 5) 2002:c0a8:101::42 - 3th octed is incorrect represented 6) 2003:dead:beef:4dad:23:46:bb:101 - from 5th to 8th octed is incorrect represented. unlucky 03-03-2009 any comments? Hey 9tut admin, Do you have any idea on the IPV6 questions? sotong 03-04-2009 Thanks hi Rojas 5 & 6 is correct.it can be rep by this way. cos of leading "0" is not mandatory. :0010: = :10: chang 03-04-2009 FADY 03-04-2009 9tut -- please comment 9tut has stopped commenting HI everybody, I contacted VUE regarding the permotion "COMEBACK2009" and good news is its for everybody ...here is their reply, Thank you for contacting Pearson VUE APAC Services. We received your inquiry on 03/04/2009. Please be informed that the promotion is for recertification as well as retake. However, Cisco will be sending out the email blast with this offer to targeted candidates only. Thank you, Sapphire Shama sotong 03-04-2009 9tut 03-04-2009 Customer Service Executive Pearson-VUE APAC Customer Service sad to hear that Q) Identity the 4 valid IPV6 addresses (choose 4) 1) :: 2) ::192:168:0:1 3) 2000:: 4) 2001:3452:4952:2837:: 5) 2002:c0a8:101::42 6) 2003:dead:beef:4dad:23:46:bb:101 This is an unclear question when asking "Identity the 4 valid IPV6 addresses". For example "::" is a valid IPv6 address but we can't assign it to an interface. Other five addresses are correct! (it is weird when the question asks us to choose only 4 addresses) Taurus 03-04-2009 Below is a quick summary about IPv6: 0:0:0:0:0:0:0:0 (or ::) equivalent of 0.0.0.0 in IPv4 0:0:0:0:0:0:0:1 (or::1) loopback, equivalent of 127.0.0.1 in IPv4 2000::/3 Globally unique addresses FC00::/7 Unique local unicast FE80::/10 Link-local unicast FF00::/8 multicast addresses 2002::/16 for transmitting IPv6 over IPv4 network @9tut: Do you know or anybody else an url or forum where i can find explained questions and labs like here for the exams: BSCI, BCMSN an the Composite Exam of both (642-892)???!! On the site "9tutor.*.com" I can´t find informations about explained questions and labs (Sims) for the exams BSCI, BCMSN an the Composite Exam of both (642-892)???!! Only for the CCNA... , all other is emty! batigoal 03-04-2009 Thanx in advance Taurus hii my exam is tomorrow 5-3-2009 .... is there any risk to enter it .. i mean change in p4s or sim's or changing exams plz inform me Thanx in advance aftershocks 03-042009 unlucky 03-04-2009 Batigoal @batigoal: i wish u all the best man... i will write mine on the 28th... i hope the updated p4s will be out by then.. :( not sure if understanding is correct, i think number two is wrong as well. It is trying to represent a IPV4 address in IPV6, therefore 96bits at start will be all zeros equal to :: and only 32bit used for entering IPV4 address which is only last two octet so should look like this ::1290:abcd instead of ::192:168:0:1 unlucky 03-04-2009 but this is only a guess 0:0:0:0:0:0:192.168.30.1 = ::192.168.30.1 = ::C0A8:1E01 unlucky 03-04-2009 just another IPV4 to IPv6 transition is it possible the actual question for ans two is ::192.168.0.1 rather than ::192:168:0:1? that would explain why it is wrong.... hey batigoal, Mattew twocities 0304-2009 Guillaume Prettykitty 03-04-2009 unlucky 03-04-2009 read the post in here, there is some information on possible updates that you might encounter, this is precious info from ppl who has taken the new exam I pass the exam this afternoon, and I just heard that the Pass4sure is useless. WHAT CAN I DO?????!!!! don't worry. I passed it this morning,finger in the nose!!! IPV6 is quite easy actually. Good luck for this afternoon. Kisses hey Guillaume Prettykitty, unlucky 03-04-2009 Can you provide more info on IPV6, how deep does it test? and how many questions on IPV6? someone 03-04-2009 sdf 03-04-2009 Pete 03-04-2009 Anonymous 03-042009 Thanks my exam is tomorrow , but i guess schedule to next week for the one ho looking 4 lab ccnp watch this site : http://ccnp-bsci.*.com/2007/05/bsci-redistribution-sim.html to 9tut, so,wat is the correct answer??? Dear sir: We have updated the exam 640-802. The new version will be online tomorrow. Please pay attention to our website. Thank you. Best regards. what is the website ..... Pete 03-04-2009 Jasbir 03-04-2009 Pete 03-04-2009 sim 03-04-2009 Anonymous 03-042009 gugu 03-04-2009 Anonymous 03-042009 Pete 03-04-2009 -d- 03-04-2009 gugu 03-04-2009 Ken 03-04-2009 9tut 03-04-2009 someone 03-04-2009 unlucky 03-04-2009 Its pass4sure.com keep an eye to see when the date changes from 12dec to 5 mar Hi ! I had heard that the dumps for the CCNA 640-802 have been changed currently m studying 3.22 version ....plzz provide me links to the latest version 3.23 as i need to give my exam asap(within 10 days) due to my job requirements. At Jasbir, read the above posts... wen will d latest dumps b available .....i ve my test on Fri 6th will the change affect my exam in any ways.. how do u know about it PETE i'm to have my exam on Friday 6th :) i'm studyn the concepts to nail the exam questions! where's 9tut? We miss you! Because Im in contact with them, Email from them a few hours ago states: There will be a new version tomorrow, its 100 bucks, extra 25 if you want hard copy I think. yeah, i'm also happy to take the exam on friday but i will be happier if i'll come across the new p4s before my exam for me to pass for sure! hahaha... it's quite risky you know... =) hehe good to know, tomorrow will be my last day of study :) becouse the exam is on friday moring 8:30 am!!! This was the Live Chat Support I had with Pass4Sure! Question: hi !! Cindy entered chat session Cindy Hi You may i know whether 640-802 has been updated or not? Cindy We will update it in 3 days Cindy 7 th You Will it be version 3.23? Cindy I don't know that ,sir Cindy We promise it will match the real exam You Oh! Okay I'm sure waiting for it!! Cindy ':) Sorry for my late responses recently, I have just launched my BSCI website digitaltut.com. Now it has only 2 labs but I will continue to update. Hope to receive your comments there! thnks 9tut GOOD NEWS everyone, i also got the same message about pass4sure update tommorrow: Dear sir: We have updated the exam 640-802, the new version will be online tommorrow. Thank you for your attention to pass4sure. Best regards. cisco@pass4sure.com ccna_bound 03-042009 CiscoBOY 03-042009 Pilipinas 03-04-2009 Bashar............ 03-042009 greg 03-04-2009 Anonymous 03-042009 gotsomeclue 03-042009 gotsomeclue 03-042009 any 03-04-2009 Name 03-04-2009 Anonymous 03-042009 Anonymous 03-042009 LALU 03-04-2009 portains 03-04-2009 9tut 03-04-2009 portains 03-04-2009 2009-03-04 how we i be able to get the updated version? can i run a live update on a version even though its "cracked" Hi is there anyone who could share Pass4sure updated version tomorrow with 9tut users?? Wish us luck for the speedy update of P4S... My exam on Sunday 8th,, please.........please, anyone will be able to get new P4S,please share it for us ........Please...........I am very afraid about the changes in P4S..... I hope so that someone can share new p4s..for others If anyone has the new pdf please share them! I could see in this site p4s has been updated on 24th Feb...!! http://www.passforsure.co.uk/640-802.html just spoke to pass4sure, they said new one will be ready friday for download. I downloaded the demo from the uk site. Only 10 questions, some new some I have seen on 3.22 from which site and it has same 402 questions The CISCO has changed the questions on 27 february so i dont think the dumps from pass4sure.co.uk are valid cause the writes the update of dump its 25 february and the official site of pass4sure its pass4sure.com and there its no update yet so i think you have to wait for an update in the official site :D Hari, portains@yahoo.com.ar Thanks! For the IPv6 question, both ::192:168:30:1 and ::192.168.30.1 are correct. The first one is a normal IPv6 address, the last one is a IPv4 to IPv6 address QUESTION NO: 1 TestKing is migrating to an IPv6 addressing scheme. Identify the four valid IPv6 addresses below that could be used in this network. (Choose four) A. ::192:168:0:1 B. 2002:c0a8:101::42 C. 2000:: D. :: E. 2001:3452:4952:2837:: F. 2003:dead:beef:4dad:23:46:bb:101 Answer: A, B, D, F Explanation: From RFC 1884: IP Version 6 Addressing Architecture There are three conventional forms for representing IPv6 addresses as Pinoy 03-04-2009 text strings: 1. The preferred form is x:x:x:x:x:x:x:x, where the 'x's are the hexadecimal values of the eight 16-bit pieces of the address. Examples: FEDC:BA98:7654:3210:FEDC:BA98:7654:3210 1080:0:0:0:8:800:200C:417A Note that it is not necessary to write the leading zeros in an individual field, but there must be at least one numeral in every field (except for the case described in 2.). 2. Due to the method of allocating certain styles of IPv6 addresses, it will be common for addresses to contain long strings of zero bits. In order to make writing addresses containing zero bits easier a special syntax is available to compress the zeros. The use of "::" indicates multiple groups of 16-bits of zeros. The "::" can only appear once in an address. The "::" can also be used to compress the leading and/or trailing zeros in an address. For example the following addresses: 1080:0:0:0:8:800:200C:417A a unicast address FF01:0:0:0:0:0:0:43 a multicast address 0:0:0:0:0:0:0:1 the loopback address 0:0:0:0:0:0:0:0 the unspecified addresses may be represented as: 1080::8:800:200C:417A a unicast address FF01::43 a multicast address ::1 the loopback address :: the unspecified addresses 3. An alternative form that is sometimes more convenient when dealing with a mixed environment of IPv4 and IPv6 nodes is x:x:x:x:x:x:d.d.d.d, where the 'x's are the hexadecimal values of the six high-order 16-bit pieces of the address, and the 'd's are the decimal values of the four low-order 8-bit pieces of the address (standard IPv4 representatio... Why is E incorrect? 2001:3452:4952:2837:: This can also be written as 2001:3452:4952:2837:0:0:0:0 Pinoy 2 03-04-2009 Isn't this right? hey pinoy where are you in manila? im also a Pinoy, hahaha.. kelan ka mageexam? bayad mo or sponsor ng company? Pinoy 03-04-2009 Pinoy 2 03-04-2009 just asking.. hehe.. tnx.. =) I'm kuala lumpur tsong. My work is here. I will be the one to pay for my exam. That's why i need to make sure that I will pass because it's not just a small amount of money. Ang hirap maghanapbuhay. :-) Tsong, hehe.. Maybe you have to call me Tsang or Tiyang, hehehe.. joke.. Korek ka jan mahirap maghanapbuhay! Ako sponsor ng company although hindi ko pera pero syempre nakakahiya sa mga boss at syempre, performancebased ang promotion di ba? Well, sana nga may pass4sure na mamaya or bukas. Email mo naman saken if meron ka na: breaker_910@yahoo.com. Salamat. acc 03-05-2009 Bacup 03-05-2009 Bacup 03-05-2009 unlucky 03-05-2009 Meron pang isang Pinoy dito ha! Yung may name ng 'Pilipinas'. Please post here the link to Latest Pass4Sure Yes 2001:3452:4952:2837:: is equivalent to 2001:3452:4952:2837:0:0:0:0 and is valid Never depend on p4s you will get fail Never depend on p4s you will get fail hi pass4sure uk valid!!!!!!!!!! i am sure..... hey backup, great website 03-052009 asad 03-05-2009 Pinoy too 03-05-2009 check if it has new access list simlet and also IPV6 question if not, it should be valid IPV6 is so confusing, dont know which is right? anyone got that qu on the new exam? dear 9tut when will pass4sure update the dumps Pinoy and Pinoy 2, Pinoy 03-05-2009 Kelan kayo exam? @Pinoy too Rehan78 03-05-2009 gech 03-05-2009 I don't have any sched for my exam yet. Since i am going to pay for my exam, i can take it any time. Dear 9tut, when will you update new questions in your site hi everybody kk 03-05-2009 9tut 03-05-2009 could you send to me also if you get it from Hari asingh 03-05-2009 Anonymous 03-052009 ckwing 03-05-2009 to goitie0045@yahoo.com guys any idea about the new dumps!!! i hav check the www.pass4sure.com they hav not updated the version yet who waz saying they thy will update it on 5 march .....? To whomever it may concern, I did my exam on the 02/03/2009 and everything went so well until i came across a bug in 3 or 4 questions. The bugs i got are mainly from simulations and questions involving you to enter a console for CLI. When i clicked on the console, a CLI normally appears but instead i got a blank box. I had to report it to the exam centre and even one of the CCNA teachers confirmed it. He told me to skip the questions and continue with Anonymous 03-052009 aziz 03-05-2009 Anonymous 03-052009 the exam then report it to Cisco. I was panicking as i did not know what to do. It wasted a lot of my time, 10-15mins.... and so I failed. Does anyone know how to make an appeal? I've been looking everywhere for customer service. u can go for u second shot @ckwing hi u can go 4 the second shot from COMEBACK2009 @Chris gech 03-05-2009 Yes, odd that the UK PS4 web site has a different update date to the US site. I thought the questions were common to all countires. Even so, the UK site update date of the 25th was a day or so before people on here started reporting the exam as having changed so don't think it will reflect the new questions. hi guys i think the Cindy at pass4sure live chat is not human -.-;; 03-05-2009 it always says you can expect a new version in 3 days i suspect it is some automated thing hello, ckwing. I had almost same problem, I am not sure, whether it was a hardware problem or software problem, I couldn't CLICK on 5 number boxes and I couldn't even ANSWER the questions, of course I knew how to solve this VTP sim question (which had 5 number boxes) it was question 25 lol. because of that I got 813/1000, it was also confirmed by receptionist but what does she know about CCNA? lol she said I was doing something wrong, I was SO angry at that point that I didn't want to leave this test centre until it is solved. the day before yesterday, I finally got my incident number from PEARSON VUE but they said, they investigated my CCNA exam file and everything but nothing is wrong with my CCNA file.....and of course I was shocked and angry again. This incident number has to go to CISCO to solve my case but since PEARSON VUE said nothing is wrong with my CCNA file, I have NOTHING to prove, CISCO wouldn't believe that I had this problem... My LAB SIM question No. 25, which had 5 questions in it, was considered as SKIPPING, so I lost my CCNA cert. I think I have to use "COMEBACK2009" promotion to re-try this exam. -.-;; 03-05-2009 -.-;; 03-05-2009 and of course with different test centre, even if it's further than previous one (No one knew about CCNA). If you have SOLID PROOFS then... I think you can appeal it via CISCO support cenre with your PEARSON VUE incident number. I just lost my $250 lol Official P4S website didn't update the lastest test dump date....it is still Dec.18 or something.. hero 03-05-2009 So, I think we have to wait until this date changes. i have received question today for ccna by my friend who did ccna test Q1:if the router is running both ipv4 and ipv6 protocol,what would u called the router? choices were:6to4 router, 4to6 router, dual_stack router Q2:which routing protocol is susceptible for local loop? choices were:ospf,ripv1 or v2,eigrp Q3:There are question about summarization and subnetting which i did not remember exactly so please skip this one. Q4: There is quesiton about ipv6 that how many ways it can represented? choices were: 2000:: , :: , :1b::abce:22fs: ::194:160:0:1 and others Q5: there r 2 question who ask me get subnet mask for an given ip address(e.g=~192.210.22.35/25) if ip subnet_zero command is running? choices were: 192.210.0.0, 192.210.255.255, 192.210.80.221 and others.i know it will take time to resolve but if u tell me real purpose of ip subnet_zero command,that would b appreciated. Q6: Can u please check question number 104,190,246,288 of p4s for me that the given answer in it is correct? i got the same question there.... greg 03-05-2009 Q7: i got a question in exam which is a bit confusing as i check answers in p4s different from 9tut...question number 4 from hotspot section in 9tut. hero ip subnet_zero means that you can use first subnet.. so if you have 192.210.22.35/25 address first subnet is 192.210.22.0 - 192.210.22.126 192.210.22.127 - broadcast 192.210.22.128 next subnet because /25 is 255.255.255.128 and 256-128 = 128 so you have only 2 subnets first 192.210.22.0 - 192.210.22.127 second 192.210.22.128 - 192.210.22.255 so it's 126 hosts per subnet greg 03-05-2009 And if your router was configured by command np ip subnet_zero then you can use only addresses from second subnet hosts great website 03-052009 192.210.22.129 - 192.210.22.254 np = no does ip subnet_zero also allow you to use the last all 1 subnet as well? The ip subnet-zero command provides the use of the first and last subnets. For example if you have a subnet of 255.255.255.224 or /27, which will give you a block of 32 addresses. The ip subnet-zero command will allow you to start with the block 0 (0-31) instead of starting with 32. This just provide a more efficient way to use your ip addresses and not waste any of them. By using this command you gain the blocks 0 and 224 to provide 0, 32, 64, 96, 128, 160, 192, and 224. Q5: there r 2 question who ask me get subnet mask for an given ip address(e.g=~192.210.22.35/25) if ip subnet_zero command is running? Chris 03-05-2009 but i dont know what it mean by get the subnet mask? so what is the correct ans? @ Anonymous gugu 03-05-2009 Many thanks.! with ip subnet zero the right answer is 192.210.0.0, greg 03-05-2009 unlucky 03-05-2009 unlucky 03-05-2009 arnold 03-05-2009 great website 03-052009 jacob 03-05-2009 great website 03-052009 Anonymous 03-052009 unlucky 03-05-2009 i think it asked the network address not the subnet mask becouse the subnet mask was given by the question ( /25 or 255.255.255.128) hey guys the latest pass4sure is out !!!!!!!! why not 192.210.22.0? i think the subnet zero address is the same as the network address of first subnet....that is where all the confusion was and why people dont use it....just a lucky guess?...not sure if right... who said so whats your proof http://www.sadikhov.com/forum/lofiversion/index.php?t127837.html a long and tedious thread i just went through x arnold the last update is 18 dec... Q2:which routing protocol is susceptible for local loop? choices were:ospf,ripv1 or v2,eigrp whats ans toabove and why? greg 03-05-2009 unlucky 03-05-2009 thanks for the help RIP v2 i RIP v1 is it bcoz they not are not dividied into sections like eigrp? unlucky 03-05-2009 unlucky 03-05-2009 Brian 03-05-2009 great website 03-052009 first examiner 03-052009 hey Anonymous thats great, our own pass4sure version...hahha to be honest, it looks very like what is mentioned of the changes in this thread.... hey what is ans to below? Q1:if the router is running both ipv4 and ipv6 protocol,what would u called the router? choices were:6to4 router, 4to6 router, dual_stack router i though it was dual stack with both v6 and v6 running... but ans in the zip say 6to4 routing, though 6-4 is ipv6 in ipv4 tunnelling? P4S said the new version would be out tomorrow...is it already out? what the version number gonna be? i say what Anonymous posted is true for new exam...but i have some doubts of the answer they selected in there....but it has thenew access list hotspot we being asking alot about....to be honest, exam changed alot thanks Anonymous, but i think alotnof ans in there are wrong, first examiner 03-052009 greg 03-05-2009 first examiner 03-052009 greg 03-05-2009 first examiner 03-052009 please raise the question you think is wrong and correct ans qu11 should ans B, E right? this was in old pass4sure Anonymous most answers are bad..i think that you don't have enough knowledge about subnneting it may not be Anonymous ans, but the one supplied the question, we still thank him for providing it yes.. i 'am going to correct answers hey greg, please provide ur ans list for reference.. bms 03-05-2009 great website 03-052009 Anonymous 03-052009 Aziz 03-05-2009 greg 03-05-2009 thanks alot Pass4sure will be updated in 1 or 2 days. I had a chat with p4s ppl.... me: When will you update the p4s for ccna ? Cindy We have been updating this exam these days. Would you plz download the product again in the user center after 1 or 2 days? dont know what is holding them back, maybe too many questions, i talk to them before, one say yesterday, one say today....now it is in another 1-2days... i am Anonymous they arnt my answer i got it from some where ........ ad i posted the link :P i know asnwer are rong but just wana confirm it that they ques are same for those who hav givn it and 1 more thing some 1 told me that second shot is only valid till 27 feb is it true if i fail .. i dun hav any second shot option Can any 1 check the ques .......what Anonymous has give those who hav given the exam check it plz and tell me wheather they are correct or not ill try 2 post the answerz Q1-AE Q2-C Q3-CDE Anonymous 03-052009 Anonymous 03-052009 greg 03-05-2009 Q4-BE Q5-D Q6 - A C F Q7 - i dont see full status of command sh ip int brief.. mayby protocool s0/1 is down or s0/0.. but if they up both answer B C Q8 - A Q9 - B EIRP - AD - 90 OSPF - 110 RIP - 120 Q10 - D Q11 - B E Q12 the same as Q11 Q13 - B C D Q14 - E and C or D.. Q15 - i dont see full Q but if multipe routes are.. router choose by AD.. so Static router ID = 1 and Connected = 0 Q16 - D Q17 C E Q18 active - sending and receiving data frames learning - populating ... listening - preventing.. root - preparing... Q20 - D E Q21 - A B D..- couse transparent mode can forward updates.. but didnt make updates in its own vlan database Q22 – BCE can any 1 check these ques are they same can any 1 plz confirm me .... wheather i hav a second shot if i fail tomm Hotspot Q1 Remove access-group 106 in from interface fa0/0 and add access-group 104 in Q2 It would be allow all traffic from the 10.4.4.0 network greg 03-05-2009 Blah 03-05-2009 Bashar 03-05-2009 greg 03-05-2009 greg 03-05-2009 gugu 03-05-2009 Q3 FTP, FTP -DATA and so on answer If anyone have question about my answers.. i 'm waiting.. Well after the last email from pass4sure the new 640-802 should now be online, which it is not, just after talking with "Cindy" again now she says to try download in 2 days.....I explained that my exam was coming up and I needed it to look over. Seems to me like they dont no themselves greg.............. I can not download this files can u explain how to down load it ??? it's not my link.. i downloaded it without any problems i send it The download limit has been reached for this file. Please contact the sender and ask them to resend the file. greg 03-05-2009 greg can you send it to rapidshare? or something like that coz you send it reached its download limit! thanks! my exam is tomorrow 8:30 am !! ok i share it on rapidshare I checked my HOT SPOT answers in my CISCO home lab and i guarantee that in 100% are good answers. Q1 Remove access-group 106 in from interface fa0/0 and add access-group 104 in Q2 It would be allow all traffic from the 10.4.4.0 network Q3 FTP, FTP -DATA and so on answer I also check with Odom Book.. others multiple Q. and i think it's correct to djabalero 03-05-2009 greg 03-05-2009 greg 03-05-2009 B 03-05-2009 gugu 03-05-2009 B 03-05-2009 greg 03-05-2009 rapidshare: http://rapidshare.com/files/205815435/ccna.rar.html greg, you are my idol, 9tut too of course..... Is that all difrrence from ps4 2.23 ? if it is.. it's more simple hehe.. HOT SPOT ACL.. is fine.. just know how to use ACL in which direction and know very important thing that on the end of the ACL list is alwayes.. implicit deny! from ps4 3.22 ofcoz Why would Question 3 be FTP but telnet would fail? is it because the telnet would have to use TCP and not just IP? thanks greg, these ccna.rar is the new exam dump?or something like that? Greg question 6 can't be ACF. F's Ip address is in the range of the dot1q10 range and host B should be in the dot1q20 range. Look at the ACL 115 access-list permit ip 0.0.0.0 255.255.255.0 any Serial 0/0/1 has already 102 ACL in access-list 102 permit tcp any any eq ftp access-list 102 permit tcp any any eq ftp-data access-list 102 deny any any eq telnet access-list 102 deny icmp any any echo-reply access-list 102 permit ip any any so telnet is deny.. we dont know about www.. but it's not deny FTP and FTP data are permitted greg 03-05-2009 ACL 115 permit all but looking on last octect and access-list 102 deny icmp any any echo-reply just deny echo-reply no echo ! greg 03-05-2009 echo is permitted.. like Q1.. I cant proove it: R1(config)#access-list 102 deny icmp any any echo-reply R1(config)#access-list 102 permit ip any any R1(config)# R1# R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int fa0/0 R1(config-if)#ip access R1(config-if)#ip access-group 102 in Sw1#ping 192.168.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms Sw1# greg 03-05-2009 you see.. echo is work R1#ping 192.168.1.11 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.11, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) fake 03-05-2009 greg 03-05-2009 but you can't ping Sw1 IP becaose.. echo-reply was denied P4S and other dump sites haven't not released any updated versions for CCNA exam. So don't believe too much in the files you downloaded from the Internet. And when i remove ACL ping to Sw1 and Sw2 now work. R1(config)#int fa0/0 R1(config-if)#no ip acc R1(config-if)#no ip access R1(config-if)#no ip access-group 102 in R1(config-if)# R1#ping 192.168.1.10 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.10, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/8 ms R1#ping 192.168.1.11 Bashar 03-05-2009 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.11, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R1# If any one hear about P4S please post here because i am very afraid about bill 03-05-2009 djabalero 03-05-2009 Anonymous 03-052009 greg 03-05-2009 exam.. Hey Greg, your rapidshare file has reached downlimit as well, I was unable to download it :( Q6 is A,C,E is there any 1 who has given CCNA exam after 27 ...e can confirm the questions ...... Q6 A C F E is wrong cause any interface dont have 192.168.1.129 IP.. so it can't be default gateway F becaose ip 192.168.1.130/26 is in subnet 192.168.1.128 - 192 so 192.168.1.191 is brodacast Anonymous 03-052009 greg 03-05-2009 192.168.1.190 is valid last HOST adress in that subnet yep, these are the questions B wrote " Greg question 6 can't be ACF. F's Ip address is in the range of the dot1q10 range and host B should be in the dot1q20 range" you don't know in which range is host B.. you have 3 subnets and 3 subinterfaces so you should compare IPs with that 3 subnets and if you do that you should know that 192.168.1.190 is in 3rd subnet.. LAST VALID HOST. becaouse 192.168.1.130 gateway.. is in subnet 192.168.1.128/26 so this subnet has range 192.168.1.128 - 192.168.1.192 192.168.1.129 - first valid host 192.168.1.191 - brodcast 192.168.1.190 last valid host and F is good answer A is couse 192.168.1.79 is host in subnet 192.168.1.64/27 so the last Ip in that subnet 192.168.1.94 and 192.168.1.78 is adress of interface fa0/0.10 so it could be the gateway that's all greg 03-05-2009 192.168.1.128 is SUBNET number.. not host it cant be answer D and it cant be answer B becaose 192.168.1.64 is subnet number of dot1q 10 subinterface E cannot be the default gatway becaose any interaface has that IP greg 03-05-2009 greg 03-05-2009 Hassan 03-05-2009 LaLu 03-05-2009 djabalero 03-05-2009 gugu 03-05-2009 Anonymous 03-052009 greg 03-05-2009 Anonymous 03-052009 so you have A C and F answer p.s I have 4 year experience in network.. i 'm working as technician, configure troubleshoot and implement CISCO devices and networks and i know what i 'm saying As you can see in Q7 .. ports 6 and 9 are in vlan 10 and vlan 20.. so.. it can be 192.168.1.190 IP for host B becaose 9 port is in vlan 20 Guys Where is new Qs!!!!!!! can somebody confirm that these questions posted here are the new questions in real exam? And if so if the person has posted this questions here means that he has other questions too,not just this 22 questions,i think so :) So why dont you post other questions too,of course if you have :) Host B is in VLAN 20, so he has to be in same subnet as interface 0/0.20 The address given as gateway is 192.168.1.10000010/26 second valid address.... The range for this subnet is 192.168.1.10000001/26 to 192.168.1.10111110/26 that is 192.168.1.129 to 192.168.19.190 so the answer is F, yes I wrongly seen there answer as ACD. Valid answer is ACF, not as on pictures. Cheers to all, greets to greg and 9tut PLZ post the rest of the question ! my exam is in about a few hours!! here the questions.. upto 22 , please some one that gets create another rapidshare link.. as o did.. http://rapidshare.com/files/205852007/ccna.rar.html LOL, ok where's the explainations. i make explanations for questions and hot spot ;] in Q5 i think that fa0/2 is the root port for Switch 4 so Switch 3 discard fa0/11 SW4 choose it fa0/2 as a root becaose it has lower internal port number than fa0/11 but cost are ties. Anonymous 03-052009 eniko 03-05-2009 Anonymous 03-052009 greg 03-05-2009 so answer is C greg, question 2 is IP not PPP PPP is the protocol that the routers are talking the pcs are talking IP this is what pass4sure said: Cindy: we will have a new version tomorrow (meaning 3/6/2009) and question trhee , where did you found that hierarchicaly ospf doesnt need other areas? Anoynmous.. i dont think so becaose PPP is point to point protocol of data link.. so.. you see.. connection with dashed lines B.. there are switches.. SWITCHES works on layer 2.. so it cant be IP couse IP is Layer 3... greg 03-05-2009 PPP provides type of data link encapsulation and it is use with Point to point WAN connections.. or HLDC protocool couase serial links dont has MAC addresses and dont use it. Hierarchicaly OSPF means that you have one DR.. one BDR.. and other routers in area 0 are just internal routers also Area 0 have route to other area.. so it needs ABR.. but some interfaces of ABR router could be in Area 0 and others in Area 1. greg 03-05-2009 So hierarchical design is ABR-> DR-> BDR-> internal routers and you dont need other areas.. only if you want to connect with other areas And other answers are completly wrong.. ID number has 0 to 65xxx Looback interface is only need for select manual DR and you dont need it in OSPF Anonymous 03-052009 greg 03-05-2009 Single area OSPF must be configured in area.. and it doesnt matter what number.. question 8 answer is A and D R1(config)#router ospf ? Process ID you see.. that is ID.. not area numbers R1(config-router)#network 10.20.10.0 0.0.3.255 area ? OSPF area ID as a decimal value A.B.C.D OSPF area ID in IP address format R1(config-router)#network 10.20.10.0 0.0.3.255 area 563 look how many areas you can have :) and how many numbers you can choose.. greg 03-05-2009 Area 0 means.. that is your first backbone area. R1(config)#router ospf ? -> Process ID R1(config)#router ospf 1 R1(config-router)#network 10.20.10.0 ? A.B.C.D OSPF wild card bits R1(config-router)#network 10.20.10.0 0.0.3.255 ? area Set the OSPF area ID R1(config-router)#network 10.20.10.0 0.0.3.255 area ? -> OSPF area ID as a decimal value A.B.C.D OSPF area ID in IP address format greg 03-05-2009 R1(config-router)#network 10.20.10.0 0.0.3.255 area w8... numbers dont appear. R1(config)#router ospf ? 1-65535 Process ID R1(config-router)#network 10.20.10.0 0.0.3.255 area ? 0-4294967295 OSPF area ID as a decimal value A.B.C.D OSPF area ID in IP address format NTel 03-05-2009 anony 03-05-2009 anony 03-05-2009 josh 03-05-2009 makahiya 03-05-2009 greg 03-05-2009 greg 03-05-2009 R1(config-router)#network 10.20.10.0 0.0.3.255 area Can any one re-post the file ? All the links reach limit download already, I can not get it. Thanks a lot. greg, the question talks about the dashed line 4 the dashed line d is t1 data modem dashed line c is ppp encapsulation of router dashed line c is 802.3 switchs dashed line 4 is both pcs the rstp question the blocked port is the higher port greg, please re-upload the file. use mediafire or megaupload. thanks. Can somebody upload the 22 questions again in rapidshare. Thanks. ok you're rite.. C is PPP .. A is IP.. that question is realy stupid about RSTP Q.. Fa0/11 must be discarded.. becasuse fa0/2 of Sw4 is RP and cannot be discard and SW3 fa0/1 is DP because it has lower cost to root.. only 4 greg 03-05-2009 anony 03-05-2009 SW4 cost to root is 23 http://www.megaupload.com/?d=E58UJ0XA another link to questions greg its me again hehe, really resolving it fast becouse my exam is 8 hours to go! the drag and drop question about stp, i never heard about the state active, and root.. stp are ¦Blocked ¦ Listening ¦ Learning ¦ Forwarding ¦ Disabled and rstp are 1.Listening 2.Learning 3.Forwarding. 4.Discarding 5.Disabled anony 03-05-2009 greg 03-05-2009 cisco is realy tring to be trick!!! do you know whats the are active and root state? i know about root port that is the closeset to the root brigde and is a forwarding port question 18 is only listening > preparing to forward without population and learning > population mac table without forwarding yet. not that the question says that not all options on left apply yep i agree with you let's analyse it again in forwarding state - forwards data frames - learn mac's based on recived frames in learning state -no forwards data frames -learns mac's ... in blocking - both NO in listening - both NO populating MAC addresses table but not forwarding frames - LEARNING preparing... LISTENING greg 03-05-2009 anony 03-05-2009 others are wrong there's no actvie or root.. look for question the wrote (NOT ALL OPTIONS ON THE LEFT ARE USED) thease questions are really stupid... CISCO want to fuck us.. thank you all, wish me luck! its me gugu the anonymous and /anoy of the last few posts questiont about questions! i will talk about the exam tomorrow after i done !!! greg 03-05-2009 makahiya 03-05-2009 anony 03-05-2009 anony 03-05-2009 Desperate 03-05-2009 anonymous 03-05- thanks again! good luck.. i have exam on 20th march.. so i have 2 weeks for preparation.. thanks greg I got it. greg can you explain the last question, why the acl would allow ftp bla bla bla and so on answer? after reading for me the answer is A becouse you can only use one acl per direction, the interface already have an IN acl so when we issue the ip access group in 115 no one will be able to connect that interface. The latest Pass4sure is out. Anyone has it? Pass4sure upadted for march 6, has any one with the new links please 2009 Anonymous 03-052009 anonymous 03-052009 unlucky 03-05-2009 Name 03-05-2009 salini 03-05-2009 awesome site 03-052009 bill 03-05-2009 gech 03-06-2009 post................ Interested too anyone got any links or version numbers ? http://www.pass4sure.com/640-802.html weird it says updated on feburary 25th which prior to exam change on 27th. however now there is 500 question before was only 400, yesterday i check was still december, so i think they did update, but why not put today's date...anyone has it to confirm or the version number? whats the version number for the updated dumps?? Please anyone able to send Latesh P4S dumps to this ID ajithsalini81@yahoo.com.sg @ salini : you're in singapore man?? me too! =P when are you going for your CCNA? Would greatly appreciate if anyone can post the new pass4sure dump!! Thanks a bunch! hi greg, the download limit in rapidshare is also exceeded please put it again or send it to goitie0045@yahoo.com anonymous 03-062009 NTel 03-06-2009 Pilipinas 03-06-2009 khaled 03-06-2009 thank you When i first check today i.e somewhere about 8 AM I.S.T it was updated on march 6,agian wheni saw at 10 AM it was changed to feb 25 ,hmmmmmmmmm..............somethin fishy @gech,Ken: This is the link to get questions from greg: http://www.megaupload.com/?d=E58UJ0XA I also upload to another for sure: http://www.4shared.com/file/91390134/4ec47fd8/ccna.html Hope all of you can get it still no new pass4sure version? dear friends i found this p4s 2.95 its was uploaded 2 day ago but its the same old qoestions and only 245 q i'm not sure its the new update or not http://www.4shared.com/file/90514600/a8f7cab8/CCNA_latest_dumps_p4s6408022195.html?s=1 NTel 03-06-2009 Bashar 03-06-2009 Anonymous 03-062009 Leeches 03-06-2009 please check and tell me I think that p4s's very old. No news on updated one. Pls share with me if you got, tendencyvn@yahoo.com any one tell me about P4S ? any update or new version ???? Pass4sure is out ...and is valid is ther any 1 who has it plz reply or try 2 gather it...and 9tut waiting 4 the new labs explanation.....thx every 1 and the 22 ques i gave are valid as well ,,,,? If all of you leeches put in $10 instead of just begging some other sucker to buy LaLu 03-06-2009 Bashar 03-06-2009 Update 03-06-2009 Update 03-06-2009 Andy 03-06-2009 Bashar 03-06-2009 great website 03-062009 it & email it to you, you would have it by now. I would be happy to paypal $10 to someone trustworthy for a group buy. If you are so worried about the exam without the new version you are not ready to take it. If there it was an option to buy with paypal i would buy in a second but there isnt so we have to wait for somebody here to buy :( Please buy it and share with us ......... Please ....... Guys, I spoke to "Cindy" and the new version has been released today. I will try and buy this today and upload it to a share. I'm not sure if the hard copy is the PDF. I'll email it out to everyone who needs this. Also, since i'm paying for this, I would like people to pitch in and refund me for this as well. I am happy to chip in for the cost. Do you have a paypal account? Are you buying the full kit or the exam software only? Thanxxx for every one will help to buy the new version... I am waiting my friends......... hey update, can you tell us what is the version number of the new update? Mo 03-06-2009 unlucky 03-06-2009 Mahir Ali Ahmed 0306-2009 akmal 03-06-2009 me too 03-06-2009 Thanks I dont mind chipping in for the cost as well, how to pay with paypal? is it credit card? I will contribute too. My exam is on 11 March 2009. Please send me as well kami769@yahoo.com Thanks for your help in this regard. HELLO UPDATE....... please send it to me too Bashar 03-06-2009 Anonymous 03-062009 greg 03-06-2009 Ramon Zarate 03-062009 afzal_rahman23@yahoo.com please any one can get new version of P4S to send it to me,, bashar_kadi@yahoo.com passed today 874, about 70% of questions was from p4s 3.22 or very similar.if not p4s i haven't pass the exam.all labs frome here exept one about access lists easy lab there were router with 4 interfaces and switch connected.you only must type sh run and understand ACLs. I remember one new question: what router wil do if you changed the conf reg on 0x2142.don't know if my answer is right. sorry for english.good luck everybody, thanks 9tut and sadikhov. can anybody can share new p4s ? out of the 22 q given by greg the answer to 5. answer should be c because out of 2 reduntant links to 2 ports fa0/11 and fa0/2 on switch 4 normally the higher port no would be put in blocking state. 8. A,D Ramon Zarate 03-062009 21. is a little doubtful-B,E are right not sure about A 22. i think it should be BDE and not BCE The rest i are absolutely right. anybody else checked these out? i forgot to put question 18 in my list above valid stp port states on a switch are listening state -preparing to forward data frames without populating mac add table learning state -populating mac add table but not forwarding frames(convergence) greg 03-06-2009 active and root states dont exist Ramon i wrote that fa0/11 should be c.. becaose fa0/2 is a Root Port of SW4 cannot be blocked gugu / anony 03-062009 about 22 you re wrong becaose vlan databes are stored in Flash.. not in nvram so if you just erase startup-config.. and restart switch.. vlans still exists.. you must type.. delete flash:vlan.dat to erase vlan from switch Hi all, just passed with 986 points!!! the exam where the 44 questions set , with a nat lab, config from start with rip v2, the acl hotspot and frame relay hotspot. greg 03-06-2009 greg 03-06-2009 Ramon Zarate 03-062009 greg 03-06-2009 greg 03-06-2009 gugu 03-06-2009 about 10 questions where from pass4sure, and lots of wireless and ipv6 questions, about 5 wireless questions and 3 ipv6 questions, the ccna.rar posted by greg is real, all questions from that file appers on my examp, and the right answer for the acl question 3 is that no host will access troght serial. an advice is , study and get the concepts, if i didt studied and lernd the concepts i would never pass. and you really must know subneting becouse my exam center my dry pen wasnt writing at all so i needed to do all the subnet calculations by read. i think i just missed one question, that was from troubleshotting verify switching vlan and interswitch communications. now its time to study for CCNP track. Congratulations, i not base on p4s only i study Odom books and working with my own lab.. i m going to take exam on 22th march gugu other 2 questions in HotSpot ACL are the same as i say ? greg where did you get these questions? looks like screenshots from actual exam. thanks a lot greg for these. and what about other questiosn from ccna.rar .. area there the same as i wrote on the forum? answers ofcos greg : Yes! i'm at work now i cant aswer write alot now, but when i get home i will check all your answers with the ones o did at the exam. i can assure 99% becouse just make one mistake in the exam. Ramon Zarate 03-062009 unlucky 03-06-2009 see you all later To greg you are absolutely right about q21 and q22. i rechecked the answers - on reading for the first time they seem to say one thing and on reading carefully they mean something different. damn tricky. i dont know whats gonna happen in the exam under pressure. thanks greg for your ans, it was very useful for me to double check, i have a question in regards to the hotspot ACL, the third question, what is the correct ans? i thought it was first no host could connect....is bcoz i thought one ACL can be used per interface and direction, therefore the ACL applied on S0/0/1 will overwrite ACL 102....and matching last octect must be zero meaning no host can have last octect zero, so not host is allowed teja 03-06-2009 greg 03-06-2009 but i am not sure using a ACL will overwrite existing? hi greg can u share the questions to me also plz....u can send me at teja33_kallakuri@yahoo.co.in. if u send will be very helpful unlucky i think that you have right, 3rd question in ACL hotSpot is A because wildcard 255.255.255.0 blocks all hosts but in Q2 you are goint to apply to ACL per interface.. and it's work.. there is anothr 106 ACL apply 114 ACL to that interface allow traffic from 10.4.4.0 network in Q1 .. last answer is good i test it.. deny echo-reply only denied ping from router to switch permit echo.. allows to pinging router from switch and thats what question about.. telneting still blocking so unlucky 03-06-2009 unlucky 03-06-2009 remove 106 and put 104 in.. is a 100% good answer in Q1 Just another possible new question in the exam, ask what 0x2142 will do for your reference router(config)# config-register 0x2142 This causes the router to ignore the start-up configuration on the next reload. ok so correct ans for the access list is as follow: 1. remove access group 106 in from int fao/o and add....104 in 2. it would be allow all traffic from the 10.4.4.0 network 3. no host could connect to RouterC through s0/0/1 is my understanding correct greg? greg 03-06-2009 greg 03-06-2009 thanks for your consistent response unlucky yes 0x2142 conf register.. is a trick to recover password.. omitted startup config.. greg 03-06-2009 unlucky 03-06-2009 Anonymous 03-062009 can somebody share new p4s ? with updates.. i think that most who.. panic.. just download new p4s and dissapear from forum.. and say ? "I have new p4s fuck off" yeah greg, suddenly so quiet....haha....i am still waiting on the new p4s, but working in the 22 question for now @ update: Please send it to Ramon Zarate 03-062009 farhan.ahmed86@yahoo.com greg i think 255.255.255.0 as a wild card is meaningless when i configured access-list 101 permit ip any 209.165.48.45 255.255.255.0 in the show running-config it is showing access-list 101 permit ip any 0.0.0.45 255.255.255.0 anon 03-06-2009 greg 03-06-2009 greg 03-06-2009 Anonymous 03-062009 Andy 03-06-2009 greg 03-06-2009 unlucky 03-06-2009 which means allow access to any network with a destination address of 45 in the last octet. Any thoughts on Question48, i think answer is C, not A hmm.. realy embarassing because 45 is not valid.. wildcard ? you also have 3 7 15 31 63 127 ... i never heard about 45 wtf ? eh i wrong.. read your post.. jest it's allow evrything with 45 in last octect.. so.. i am think that good answer in Q3 is ..C ACL Q3 answer is c. The wildcard mask of 255.255.255.0 mean to that the first 3 octets can be anything but the fourth octet must match 0; Thus is the fourth octet must match 0, you cannot have any hosts because there is no such thing as a host with a 0 in the last octet; think about it this way, no matter what subnet you have (/27, /29, /28, etc... .0 is always a network address and will never be a host address). As I have said, I am happy to paypal money to anyone who buys the new version. I hope that the parasites that just type their email address get nothing. ok so HotSpot is done.. i dont know about any other Q.. just that 22.. in ccna.rar file... and nobody share new p4s.. for check another... hey Anonymous, from your explanation, wouldnt ACL Q3 ans be no host could connect to RouterC through S0/0/1? unlucky 03-06-2009 i am confused can ACL 115 and ACL 102 exist at the same time on inbound S0/0/1? greg 03-06-2009 i thought one ACL per direction per interface access-list 105 permit ip 0.0.0.0 255.255.255.0 any means that if you have IP address 10.4.4.19 for example.. ACL looks only for last octect .. so in summary evry host witch has in last octect IP address 19.. is allowed.. and it doesnt matter from which network it comes.. becaouse 105 ACL thinks like that: example: 192.168.1.19 172.10.10.8 89.30.40.19 192.189.30.19 gotsomeclue 03-062009 bms 03-06-2009 anon 03-06-2009 evry host with 19 in last octect will be allow. hey anybody know whats the version for new dumps?? pass4sure has been updated with 503 Q&A. Does anybody has the new version ? yes, answer is A: No host could connect to Router through ser0/0/1 sorry for last error. Answer is Q503 is A. The wildcard mask of 255.255.255.0 means: First 3 octets can be anything last octen must be 0 kj91 03-06-2009 greg 03-06-2009 greg 03-06-2009 Thus: No host could connect because X.X.X.0 will NEVER be a host address. unlucky 03-06-2009 you are right becaose host cannot has 0 in last octect :) summary if you have ACL greg 03-06-2009 permit ip 10.4.4.19 255.255.255.0 any summary if you have ACL permit ip 10.4.4.19 255.255.255.0 is valid ACL becaose host can has 19 in last octect permit ip 0.0.0.0 255.255.255.0 is not valid becaose host cannot has 0 in last octect sal 03-06-2009 so this ACL 105 block all in S0/0/1 Need explanation on Q48... Why not answer C? unlucky 03-06-2009 Why will OSPF neighbor not establish>? okok thanks so my original understanding is right....nearly had a brain greg 03-06-2009 anon 03-06-2009 gech 03-06-2009 malfunction.....thought all my previous ACL understand is incorrect...was just going to review the whole material....but it is good everything is solved and agreed upon i dont have q48 ????? share new dumps ? hard to share, new reg code, serial codes, other codes, go to website, subtmi this, copy there, paste there... do 10 pushups, submit reg code again; stand on one foot, tripple right click, prey, than it might launch. ello budys if you come accross the new p4s please send it to goitie0045@yahoo.com or post it on some site unlucky 03-06-2009 thank you hey Anon, do you have the latest pass4sure? "Answer is Q503 is A." greg 03-06-2009 greg 03-06-2009 unlucky 03-06-2009 greg 03-06-2009 unlucky 03-06-2009 unlucky 03-06-2009 Raeem 03-06-2009 Raeem 03-06-2009 unlucky 03-06-2009 thanks, can you tell us the version it is? Hehehe makes screens for new questions.. and share.. others which is the same with 3.22 dont share scary....so many.....security....that is why they delay 2 days to get it out.....to put on the security security for make screens ? i know it might use up some of your time....but it will help us alot and we can discuss questions together as well if there is uncertain answers haha...greg no....was just commenting Anon previous message chat with Cisco Your session reference number is 262561427 Question: is pass4sure for CCNA is latest? as i know exam questions are changed on 27 of feb 2009 and u update it on 25th feb Cindy entered chat session Cindy entered chat session Cindy We just updated it today. You yes i know but update date says 25 Feb does this means it include question till 25 feb? Cindy No,today You thanks it will ease some pressure from me on network manager site it says new version soon, dont worry guys u will get latest version soon from network manager or from 9tut, and hope 9tut will explain it to u as he did in the past hey Raeem, do you have the link to the network manager site? Raeem 03-06-2009 Thanks link for network manager site unlucky 03-06-2009 http://networkmanagers.googlepages.com/ccna hey greg, what is the ans to Q14? E and ? LaLu 03-06-2009 is the question not complete? Question 6: You were correct for A+C but D isn't the correct answer. 192.168.1.128 is a subnet host, because the subnet mask of vlan 20 default-gateway is /27, the block size is 64. so subnets goes as 0, 64, 128, 192. means 128 is NOT a vaild host address. F is the correct answer because its in the range of 129 - 191 (valid host range for that subnet) For the question5: The correct answer is C. S4 will check whats its best route to the root, and since the root cost is equal, it will check the neighor's switch BID. its equal too (because both links goes to the same switch), then it will check port priority. both ports are FE, so unless define otherwise their priority is equal too. so, as a tie breaker we will use the LOWEST physical ID. so, the root port will be Fe0/2, so Fe0/11 will be in BLK / discarding mode. greg 03-06-2009 greg 03-06-2009 Camoteq 03-06-2009 LaLu 03-06-2009 djabalero 03-06-2009 unlucky 03-06-2009 unlucky 03-06-2009 Raeem 03-06-2009 for the question 3: You were correct on C+E. D isn't correct because hierarchical topology must include area's, otherwise it won't be an hierarchical.. it will be one big area. so B is the correct because OSPF id range is from 0 to 65k (65535 to be exactly). lalu wake up.. i correct that about 50 posts earlier Q3... B answer is wrong beacose ID has 65k.. no AREA.. area much much more... @LAlu: i don't think B is a correct answer in Q3. Option B refers to Area. OSPF Area ID has a range of up to 4billion. You might be referring to OSPF Process ID which is indeed from 1-65535. so the right answers for question three are C+D+E? yes but hichearchical ospf needs multiple areas, I think this question is little messed up and does not have the right answer is that question in the new pass4sure? we can ask the person who has it to check what is the answer in there for Q4, why i only see 255.255.255.224 as the answer, only one satisfy max 50 host per subnet but there are 2 correct ans....strange Guys here this is the link for revision material for CCNA, it covers all topics very briefly, find it very good so posted on mega upload Pilipinas 03-06-2009 Camoteq 03-06-2009 Anonymous 03-062009 unlucky 03-06-2009 unlucky 03-06-2009 http://www.megaupload.com/?d=T3SE5EXD 'Hope we can summarize these questions in order... :) @unlucky: 255.255.255.224 subnet mask will only gives you a max of 30 hosts not enough to handle 50 max hosts per subnet. the subnet mask 255.255.255.192 will give you a max host of 62 which can cover 50 hosts. the question is a bit tricky that you need to subnet a class B network (/16) into 300 subnets which gives you /25 as the netmask after subnetting. thanks, just a gramma issue i have...i thought 50 max means no more than 50....but what it actually means at certain time there will be max 50 ppl, so you need to have more than 50.... i have to say they english gramma does need to some confusion, first half say minimum 300 subnet so i thought the answer needs to be at least 300 or more......and using 50 max, i would thought it is opposite to front part of the sentence so no more than 50 hosts....but maybe just my gramma understand... thanks now i know why the answer is that anyone know the correct answer to 14? it is E and ?? Vali 03-06-2009 thanks @ gugu / anony the nat lab that you are saying its one from this two sims here? http://www.9tut.com/ccna-lab-sim/52-ccna-nat-sim-question http://www.9tut.com/ccna-lab-sim/57-ccna-nat-sim-question-2 B 03-06-2009 Anonymous 03-062009 Anonymous 03-062009 Anonymous 03-062009 Bashar 03-06-2009 tito 03-06-2009 Tim 03-06-2009 B 03-06-2009 and can i know what did you mean with this word: config from start with rip v2 its a sim from this site here or what? thnx ... Any news on the new Pass4sure today? So they released a new version of this now. I noticed that one person took the test and 70% was from p4s, so the old version must still have some good value. i think someone already purchased it....but.... but what? Raeem I can not download the file ...... plz 9tut if u can upload the new p4s???????????//////// So all you have to do with theses labs, just read over them over and over and to make sure you memorize the commands? and you're good to go? Where did you hear that someone passed with new pass4sure? link? I'd look here for up dates: help 9tut 03-06-2009 help 9tut 03-06-2009 Bashar 03-06-2009 Anonymous 03-062009 Anonymous 03-062009 Anonymous 03-062009 ROJAS 03-06-2009 http://ciscodumps4u.*.com/search/label/CCNA hi can u plz upload the ACL hot spot ques wid explanation ..... from da 22 ques that greg hav posted any 1 has the new ver of p4s ......what is the version nos any news about P4S ??????? p4s update but nobody share it any 1 here knows about the other lab in da test can u plz upload the rest ques......that greg send...22 of them wid explanation it would b great if u do it thax... Hello all, I'm just passed in my exam, thanks to all that sharing your experience. thank you very much 9tut the question posted here are very important to exam I have 44 questions I think I have about 6 or 7 question from pass4sure 2.23 allam 03-06-2009 Anonymous 03-062009 Anonymous 03-062009 Anonymous 03-062009 Anonymous 03-062009 greg 03-06-2009 Bashar 03-06-2009 Anonymous 03-062009 Bashar 03-06-2009 Anonymous 03-062009 greg 03-06-2009 greg 03-06-2009 Andy 03-06-2009 Mo 03-06-2009 Anonymous 03-062009 regards, Walter Rojas what is new about new version ? why no one talk about purshasing it ? is it expensive!!!!! Why don't you guys use TK and 9tut? new Tesking has the same questions ? and update ? Yes, it appears they do. I checked the site an hr ago. plz give link for new Test KING can any one share TestKing or P4S ??? The testking stuff is only avaliable in ipad format, not PDF. the exam is difficult without P4S ..... Anyone have insight on Q373 ? Why is copr-4 the DR, seems like branch-2 should be DR Anonymous.. give us a dumps.. then i can answer you ? how i can know which fukcin question is 373 ? i dont have new p4s or TK! fuck you all... i give you answers and questions.. and explain them.. you have new dumps and dont want share.. SO FUCK OFF.. with your questions... nobody want to help you assholes. If 5 people put in $20 each for a group buy we will have it. It is possible it will show up on rapidshare in the next few days as well. I Agee with you greg some people are just willing to take and not give,whats your addy will e-mail once i got it. suggestions: 1.) curing at someone is not a good way to get what you want. 2.) i already told you that the sec measures on the new version are significantly more than previos; it involves order number, serial code, submit to website, get coded hash, submit, get another hash, copy, paste back into main screen, dance in circiles, wait until it rains, tripple right click, rub your head and pat your stomache, then click submit and it MIGHT work. Q373: All router OSPF Priorities are at default and the IDs are as follows: RouterIDs: 10.1.10.10 Corp-1 10.1.20.20 Corp-2 10.2.40.40 Copr-4 10.2.10.10 Branch-1 10.2.30.30 Branch-2 Which routers may have been chosen as DR? A Corp-1 B Corp-2 C Branch-2 D Corp-4 P4S answer: C & D mo 03-06-2009 Anonymous 03-062009 I dont understand why D Corp-4 would be DR anonymous why dont you share the new pass4sure dump with us Previos post had multiple typos.... Q373: All router OSPF Priorities are at default and the IDs are as follows: RouterIDs: 10.1.10.10 Corp-1 10.1.20.20 Corp-2 10.1.40.40 Copr-4 10.2.10.10 Branch-1 10.2.20.20 Branch-2 Which routers may have been chosen as DR? A Corp-1 B Corp-2 C Branch-2 D Corp-4 P4S answer: C & D mo 03-06-2009 Andy 03-06-2009 Pete 03-06-2009 I dont understand why D Corp-4 would be DR anonymous jou groot gaat hoendernaai anonymos, figure it out yourself asshole! @Anonymous yes you had too go through a lot to get the material but you have it there now sitting on your pc, so go on upload it for the rest of us! You have got alot of material from 9tut I'm sure so please give back. greg 03-06-2009 In the mean time I have been searching sites but as of yet not come accross it, If I do I will upload it on my rapidshare account like I did with other training material that people have downloaded 000's of times, after all sharing is caring because electing.. DR is simple... the higher PHYSICAL IP, and if you want choose DR by your self you need create loopback.. or give ID.. in router ospf mode.. So.. address 10.1.40.40 is the highest IP in area and.. 10.2.20.20 too. Anonymous 03-062009 Bashar 03-06-2009 Bashar 03-06-2009 Mayo 03-06-2009 greg 03-06-2009 Mayo 03-06-2009 greg 03-06-2009 greg 03-06-2009 alaa 03-06-2009 greg 03-06-2009 Bashar 03-06-2009 greg 03-06-2009 Bashar 03-06-2009 greg 03-06-2009 both IP's can be DR how are both IPs highest? I thought 10.2.20.20 is highest and therefor is DR My exam on Sunday, and you did not share P4S ??? write new questions and exhibits on word file and share it please ...... about q18 in greg question I think it talks about states not roles please correct the answers ... I am wait the question is which routers can be DRs... please read the question carefully anonymous... c",) Anonymous.. my be that IP is loopback i dont see... lsting.. MAKE SCREENS and share it.. it is very simple.. PRT SC paste to PAINT and save as JPG ? Sa mga pinoy dyan.. wuzzup! sana makapasa na tau bashar only 2 states.. Learning and Listening is valid.. Learning is the 1, third is listening Who bought the dumps ? i can help him to share it.. if he didn't know.. greg are u sure from dump no. 4 answer i dont have any dumps.. i just have knowledge ;] greg......... what is the final answers for last question in ur questions ??? i am mystification ... greg you are real man... thanxxxxxxxx I hope to find new dump before Sunday ..... Q22 BCE greg i mean hotspot ....... hot spot ACL Q1 - E Bashar 03-06-2009 B 03-06-2009 greg 03-06-2009 Anonymous 03-062009 Q2 - B Q3- A thanxxxxxxxxxxxxxxxxxxxxxxxxxxx greg ........... I have a feeling you might find new p4s on this website before any others... www.itguruindia.com clear.. only 3.22 which is old.. Select the valid IPv6 addresses: (Choose all apply) A :: B ::192:168:0:1 C 2002:coa8:101::42 D 2003:dead:beef:4dad:23:46:bb:101 P4s answer: A B C D greg 03-06-2009 alaa 03-06-2009 greg 03-06-2009 alaa 03-06-2009 greg 03-06-2009 HELp 03-06-2009 unlucky 03-06-2009 Never seen a question in which all answer choices are correct and also find it off that the IP reads "dead beef for dad"..... any thoughts? go and learn hexadecimal ;] plz anonymous send this p4s u have to me mohammed3alaa@yahoo.com he never send it to you :) why ????? we can help each other to understand this dump and if i have money i can buy and share it to all people plz anonymous again we need this ask him.. i asking him before.. and he said "i cannot" so.. any 1 here even know the version here .....whts the new ver of p4s ... i can understand if he doesnt want to take time to copy the image to PDF or word document for sharing....but at least tell what is the new version number....