ASTM Volume 04.08, March 2014
Soil and Rock (I): D420-D5876
Standard Number
1 D421-85(2007)
2 D422-63(2007)e1
3 D425-88(2008)
4 D558-11
5 D653-11
6 D698-12e1
7 D806-11
8 D854-10
9 D1140-00(2006)
10 D1143/D1143M-07(2013)
11 D1241-07
12 D1411-09
13 D1452-09
14 D1556-07
15 D1557-12
16 D1558-10
17 D1586-11
18 D1587-08(2012)e1
19 D1632-07
20 D1633-00(2007)
21 D1634-00(2006)
22 D1635/D1635M-12
23 D1883-07e2
24 D1997-13
25 D2113-08
26 D2166/D2166M-13
27 D2167-08
28 D2168-10
29 D2216-10
30 D2434-68(2006)
31 D2435/D2435M-11
32 D2487-11
33 D2488-09a
34 D2573-08
35 D2844/D2844M-13
36 D2845-08
37 D2850-03a(2007)
38 D2936-08
39 D2937-10
40 D2944-13
41 D2973-10e1
42 D2974-13
43 D2978-03(2010)
Title
Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and
Determination of Soil Constants
Standard Test Method for Particle-Size Analysis of Soils
Standard Test Method for Centrifuge Moisture Equivalent of Soils
Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
Standard Terminology Relating to Soil, Rock, and Contained Fluids
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort
(12 400 ft-lbf/ft3 (600 kN-m/m3))
Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75μ m) Sieve
Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate
Road Mixes
Standard Practice for Soil Exploration and Sampling by Auger Borings
Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort
(56,000 ft-lbf/ft3 (2,700 kN-m/m3))
Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-
Grained Soils
Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams
Broken in Flexure (Modified Cube Method)
Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point
Loading
Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry
Mass
Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and
Rock by Mass
Standard Test Method for Permeability of Granular Soils (Constant Head)
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental
Loading
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification
System)
Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
Standard Test Method for Field Vane Shear Test in Cohesive Soil
Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic
Constants of Rock
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive
Soils
Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
Standard Practice of Sampling Processed Peat Materials
Standard Test Method for Total Nitrogen in Peat Materials
Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
Standard Test Method for Volume of Processed Peat Materials
ASTM Volume 04.08, March 2014
Soil and Rock (I): D420-D5876
66 D4105-96(2008)
67 D4106-96(2008)
68 D4186/D4186M-12
69 D4219-08
70 D4220/D4220M-14
71 D4221-11
72 D4223/D4223M-12
73 D4253-00(2006)
74 D4254-00(2006)e1
75 D4318-10e1
76 D4320/D4320M-09
77 D4373-02(2007)
78 D4380-12
79 D4381/D4381M-12
80 D4394-08
81 D4395-08
82 D4403-12
83 D4404-10
Standard Number
44 D2980-04(2010)
45 D3080/D3080M-11
46 D3155-11
47 D3213-13
48 D3282-09
49 D3385-09
50 D3404-91(2013)
51 D3550-01(2007)
52 D3551-08
53 D3689/D3689M-07(2013)e1
54 D3740-12a
55 D3877-08
56 D3966/D3966M-07(2013)e1
57 D3967-08
58 D3999/D3999M-11e1
59 D4015-07
60 D4016-08
61 D4043-96(2010)e1
62 D4044-96(2008)
63 D4050-96(2008)
64 D4083-89(2007)
65 D4104-96(2010)e1
Title
Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-
Saturated Peat Materials
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway
Construction Purposes
Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-
Lime Mixtures
Standard Test Methods for Deep Foundations Under Lateral Load
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils
Using the Cyclic Triaxial Apparatus
Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory
Method)
Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well
Techniques
Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for
Determining Hydraulic Properties of Aquifers
Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for
Determining Hydraulic Properties of Aquifer Systems
Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky
Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug
Tests)
Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage
Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage
Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils
Using Controlled-Strain Loading
Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils
Standard Practices for Preserving and Transporting Soil Samples
Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory
Table
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of
Relative Density
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for
Obtaining Engineering Parameters
Standard Test Method for Rapid Determination of Carbonate Content of Soils
Standard Test Method for Density of Bentonitic Slurries
Standard Test Method for Sand Content by Volume of Bentonitic Slurries
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid
Plate Loading Method
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using
Flexible Plate Loading Method
Standard Practice for Extensometers Used in Rock
Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
106 D4630-96(2008)
107 D4631-95(2008)
108 D4633-10
109 D4643-08
110 D4644-08
111 D4645-08
112 D4647/D4647M-13
113 D4648/D4648M-13
114 D4696-92(2008)
115 D4700-91(2006)
116 D4718-87(2007)
117 D4719-07
118 D4729-08
119 D4753-07
120 D4767-11
121 D4829-11
122 D4832-10
123 D4879-08
124 D4914-08
125 D4943-08
126 D4944-11
Standard Number
84 D4427-13
85 D4428/D4428M-07
86 D4429-09a
87 D4435-13e1
88 D4436-13e1
89 D4452-06
90 D4506-13e1
91 D4511-11
92 D4525-13e1
93 D4531-86(2008)
94 D4535-13e1
95 D4542-07
96 D4543-08
97 D4544-12
98 D4546-08
99 D4553-08
100 D4554-12
101 D4555-10
102 D4609-08
103 D4611-08
104 D4612-08
105 D4623-08
ASTM Volume 04.08, March 2014
Soil and Rock (I): D420-D5876
Title
Standard Classification of Peat Samples by Laboratory Testing
Standard Test Methods for Crosshole Seismic Testing
Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
Standard Test Method for Rock Bolt Anchor Pull Test
Standard Test Method for Rock Bolt Long-Term Load Retention Test
Standard Practice for X-Ray Radiography of Soil Samples
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using
Radial Jacking Test
Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
Standard Test Method for Permeability of Rocks by Flowing Air
Standard Test Methods for Bulk Density of Peat and Peat Products
Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying
Conformance to Dimensional and Shape Tolerances
Standard Practice for Estimating Peat Deposit Thickness
Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils
Standard Test Method for Determining In Situ Creep Characteristics of Rock
Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ
Uniaxial Compressive Test
Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
Standard Test Method for Specific Heat of Rock and Soil
Standard Practice for Calculating Thermal Diffusivity of Rocks
Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring
Method?USBM Borehole Deformation Gauge
Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-
Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
Standard Test Method for Energy Measurement for Dynamic Penetrometers
Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven
Heating
Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing
Method
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the
Pinhole Test
Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained
Clayey Soil
Standard Guide for Pore-Liquid Sampling from the Vadose Zone
Standard Guide for Soil Sampling from the Vadose Zone
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize
Particles
Standard Test Methods for Prebored Pressuremeter Testing in Soils
Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
Standard Test Method for Expansion Index of Soils
Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM)
Test Cylinders
Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand
Replacement Method in a Test Pit
Standard Test Method for Shrinkage Factors of Soils by the Wax Method
Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium
Carbide Gas Pressure Tester
ASTM Volume 04.08, March 2014
Soil and Rock (I): D420-D5876
Standard Number
127 D4945-12
128 D4959-07
129 D4971-08
130 D4972-13
131 D4992-07
132 D5030/D5030M-13a
133 D5079-08
134 D5080-08
135 D5084-10
136 D5088-02(2008)
137 D5092-04(2010)e1
138 D5093-02(2008)
139 D5102-09
140 D5121-10
141 D5126/D5126M-90(2010)e1
142 D5143-06(2010)e1
143 D5195-08
144 D5202-08
145 D5220-08
146 D5239-12
147 D5240/D5240M-12(2013)
148 D5254/D5254M-92(2010)e1
149 D5255-01(2008)
150 D5268-13
151 D5269-96(2008)
152 D5270-96(2014)
153 D5298-10
154 D5299-99(2012)e1
155 D5311/D5311M-13
156 D5312/D5312M-12(2013)
157 D5313/D5313M-12(2013)
158 D5314-92(2006)
159 D5334-08
160 D5335-08
161 D5408-93(2010)e1
162 D5409/D5409M-93(2010)e1
163 D5410-93(2007)
164 D5434-12
165 D5435-13
166 D5447-04(2010)
Title
Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using
Diametrically Loaded 76-mm (3-in.) Borehole Jack
Standard Test Method for pH of Soils
Standard Practice for Evaluation of Rock to be Used for Erosion Control
Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
Standard Practices for Preserving and Transporting Rock Core Samples
Standard Test Method for Rapid Determination of Percent Compaction
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials
Using a Flexible Wall Permeameter
Standard Practice for Decontamination of Field Equipment Used at Waste Sites
Standard Practice for Design and Installation of Groundwater Monitoring Wells
Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
Standard Practice for Preparation of Rock Slabs for Durability Testing
Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in
Vadose Zone
Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High
Performance Liquid Chromatography
Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear
Methods
Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical
Grouted Soils
Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron
Depth Probe Method
Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium
Sulfate or Magnesium Sulfate
Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
Standard Specification for Topsoil Used for Landscaping Purposes
Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the
Theis Recovery Method
Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded,
Nonleaky, Confined Aquifers
Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices,
Boreholes, and Other Devices for Environmental Activities
Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and
Drying Conditions
Standard Guide for Soil Gas Monitoring in the Vadose Zone
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by
Thermal Needle Probe Procedure
Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded
Electric Resistance Strain Gauges
Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional
Identification Descriptors
Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical
Descriptors
Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage
Descriptors
Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection
Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem
Standard Number
167 D5473-93(2006)
168 D5474-93(2012)
169 D5490-93(2008)
170 D5519-07
171 D5520-11
172 D5521/D5521M-13
173 D5539-13
174 D5550-06
175 D5607-08
176 D5608-10
177 D5609-94(2008)
178 D5610-94(2008)
179 D5611-94(2008)
180 D5715-00(2006)
181 D5716-95(2006)
182 D5718-13
183 D5719-13
184 D5720-95(2009)
185 D5731-08
186 D5737-95(2006)
187 D5738-95(2006)
188 D5753-05(2010)
189 D5754-95(2006)
190 D5777-00(2011)e1
191 D5778-12
192 D5779/D5779M-14
193 D5780-10
194 D5781/D5781M-13
195 D5782-95(2012)
196 D5783-95(2012)
197 D5784/D5784M-13
198 D5785-95(2013)
199 D5786-95(2012)
200 D5787-95(2009)
201 D5850-95(2012)
202 D5852-00(2007)
203 D5855-95(2013)
ASTM Volume 04.08, March 2014
Soil and Rock (I): D420-D5876
Title
Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky
Confined Aquifer
Standard Guide for Selection of Data Elements for Groundwater Investigations
Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
Standard Specification for Seed Starter Mix
Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens
Under Constant Normal Force
Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive
Waste Sites
Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils
(Visual/Manual Method)
Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
Standard Guide for Documenting a Groundwater Flow Model Application
Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement
Systems for Geotechnical Purposes
Standard Test Method for Determination of the Point Load Strength Index of Rock and
Application to Rock Strength Classifications
Standard Guide for Methods for Measuring Well Discharge
Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses
Standard Guide for Planning and Conducting Borehole Geophysical Logging
Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses
Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and
Manmade Materials for Erosion Control
Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental
Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the
Installation of Subsurface Water-Quality Monitoring Devices
Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for
Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring
Devices
Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the
Installation of Subsurface Water-Quality Monitoring Devices
Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined
Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug
Test)
Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for
Determining Hydraulic Properties of Aquifer Systems
Standard Practice for Monitoring Well Protection
Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the
Jet Index Method
Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage
Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing
Well
Standard Number
204 D5856-95(2007)
205 D5872/D5872M-13
206 D5873-14
207 D5874-02(2007)
208 D5875/D5875M-13
209 D5876-95(2012)e1
ASTM Volume 04.08, March 2014
Soil and Rock (I): D420-D5876
Title
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a
Rigid-Wall, Compaction-Mold Permeameter
Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental
Exploration and Installation of Subsurface Water-Quality Monitoring Devices
Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
Standard Test Method for Determination of the Impact Value (IV) of a Soil
Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental
Exploration and Installation of Subsurface Water-Quality Monitoring Devices
Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for
Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices