Lab Safety Crossword Puzzle Review
1
2
3
4
5
6
9
7
10
11
12
13
14
15
16
NAME: __________________________________________
17
Score _____________/
8
Down1. Always disconnect the _______ from any tool when changing a blade, belt, bit, or disk.
2. Never ______ the saw when the blade is moving.
3. Use _____ when making sharp curved cuts.
4. If the stock ______, hold it down tight and turn the saw off.
5. Always secure your work piece to the fence or table using ______.
6. Only sand on the ________ side of the disk sander.
7. Never push stock against the sander with _________ force.
13. Always return the saw to the ______ or the table.
Across2. Never operate the sander if the sandpaper attached to it is ___________.
5. Always remove the _______ after tightening or loosening the jaws.
8. When working with a small piece of wood, one should use what to help hold it securely?
9. Never adjust the _______ when the machine is running.
10. Use the ______ when crosscutting a piece of stock.
11. Always keep hair, loose jewelry, and loose clothes away from what part of the drill press?
12. Let the saw reach full ______ before you begin cutting your piece.
14. If the _____, turn off the machine and tell the instructor.
15. Always ______ until the blade stops moving before removing any stock from any machine.
16. Hold onto the saw when ________ to prevent the blade from moving forward.
17. Always hold the stock tight against the ________ when using this machine