as of 30 May 2013
List of Harmonised Standards for EEE
No.
1
Agreed edition* of IEC Standards for
ASEAN Harmonization
IEC 60065 Ed.7.0(2001)
Standard Title
Audio, video and similar electronic apparatus —Safety
requirements
Scope of Standard
Audio product,
High-fidelity set,
Laser disc Set,
Television,
Television or video display unit,
Video cassette recorder,
Cassette player,
Portable radio cassette player/recorder,
Video compact disc player,
Sub-woofer, Amplifiers,
Equalizers/ Mixers, Karaoke,
PA system,
Portable Hi-Fi System, Radio,
Radio alarm, Tuner / Receiver,
Turn tables / Record players,
Projection television,
Compact disc players,
Video cassette recorder / players,
Digital versatile disc players,
Children video games
2
IEC 60335-1 (depends on particular Part
2s)
Household and similar electrical appliances- Safety Part 1:
General requirements
Household and similar electrical appliances- Safety
Part 1: General requirements
3
IEC 60335-2-101 Ed.1.0(2002)
Household and similar electrical appliances - Safety - Part
2-101: Particular requirements for vaporizers
Electric aroma vaporisers
4
IEC 60335-2-101 Ed.1.0(2002)
Household and similar electrical appliances - Safety - Part
2-101: Particular requirements for vaporizers
Mosquito matt vaporisers
5
IEC 60335-2-11 Ed.6.0(2002)
Household and similar electrical appliances - Safety - Part
2-11: Particular requirements for tumble dryers
Tumbler dryers
6
IEC 60335-2-12 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-12: Particular requirements for warming plates and
similar appliances
Electric warming plates
7
IEC 60335-2-13 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-13: Particular requirements for deep fat fryers, frying
pans and similar appliances
Deep fryer, electric wok and similar appliances,
Electrical deep fryers,
Electric fryers
8
IEC 60335-2-14 Ed.4.0(2002)
Household and similar electrical appliances - Safety - Part
2-14: Particular requirements for kitchen machines
Electric blenders
Electric food processors,
Electric juice extractors,
Electric grinders,
Electric mixers,
Electric choppers
9
IEC 60335-2-15 Ed.5.0(2002)
Safety of household and similar electrical appliances Part 2-15: Particular requirements for appliances for
heating liquids
Electric fryers, Kettle, Rice cooker
Electrical coffee/Tea makers,
Electrical food steamers,
Electrical slow cookers,
Electric egg boilers, Electric jugs,
Electric steam boats,
Electric airpots,
Electric steam generator appliances
Electric thermo pots,
Electric immersion sticks,
10
IEC 60335-2-2 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-2: Particular requirements for vacuum cleaners and
water-suction cleaning appliances
Vacuum cleaner and water suction cleaning appliances,
Carpet cleaners
11
IEC 60335-2-21 Ed.5.1(2004)
Household and similar electrical appliances - Safety - Part
2-21: Particular requirements for storage water heaters
Electric storage water heaters,
Storage water heater and immmersion
12
IEC 60335-2-23 Ed.5.0(2003)
Household and similar electrical appliances - Safety - Part
2-23: Particular requirements for appliances for skin or
hair care
Electrical hair dryers
Electric hair styling set
13
IEC 60335-2-24 Ed.5.0(2000)
Household and similar electrical appliances - Safety - Part
2-24: Particular requirements for refrigerating appliances,
ice-cream appliances and ice makers
Refrigerating appliances, ice cream appliances and ice
makers,
Electric refrigerators
Electric freezers
Electric minibars
14
IEC 60335-2-25 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-25: Particular requirements for microwave ovens,
including combination microwave ovens
Microwave oven
15
IEC 60335-2-28 Ed.4.0( 2002)
Household and similar electrical appliances - Safety - Part
2-28: Particular requirements for sewing machines
Electric sewing machines
16
IEC 60335-2-29 Ed.4.1(2004)
Household and similar electrical appliances - Safety Part 2-29: Particular requirements for battery chargers
Portable battery chargers (up to 12V)
17
IEC 60335-2-3 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-3: Particular requirements for electric irons
Electrical irons
18
IEC 60335-2-31 Ed.4.0(2002)
Household and similar electrical appliances - Safety - Part
2-31: Particular requirements for range hoods and other
cooking fume extractors
Electric range hoods
19
IEC 60335-2-35 Ed.4.0(2002)
Household and similar electrical appliances - Safety - Part
2-35: Particular requirements for instantaneous water
heaters
Instantaneous electric water heater
20
IEC 60335-2-36 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-36: Particular requirements for commercial electric
cooking ranges, ovens, hobs and hob elements
Electric built-in hobs
21
IEC 60335-2-4 Ed.4.0(2002)
Household and similar electrical appliances - Safety - Part
2-4: Particular requirements for spin extractors
Spin extractors
22
IEC 60335-2-40 Ed.3.0(2002)
Household and similar electrical appliances - Safety - Part
2-40: Particular requirements for electrical heat pumps,
air-conditioners and dehumidifiers
Electrical heat pumps, air-conditionners and
dehumidifiers,
Mobile split air-conditioners,
Room air-conditioners
23
IEC 60335-2-43 Ed.3.0(2002)
Household and similar electrical appliances - Safety - Part
2-43: Particular requirements for clothes dryers and towel
rails
Electric cloth dryers
24
IEC 60335-2-44 Ed.3.0(2003)
Household and similar electrical appliances - Safety - Part
2-44: Particular requirements for ironers
Electric ironers
25
IEC 60335-2-45 Ed.3.0(2002)
Household and similar electrical appliances - Safety - Part
2-45: Particular requirements for portable heating tools
and similar appliances
Electric soldering irons
26
IEC 60335-2-6 Ed.5.0 (2002)
Household and similar electrical appliances - Safety - Part
2-6: Particular requirements for stationary cooking ranges
27
IEC 60335-2-7 Ed.5.0 (2000)
Household and similar electrical appliances – Safety –
Part 2-75: Particular requirements for commercial
dispensing appliances and vending machines
Stationary cooking ranges, hobs, ovens and similar
appliances,
Cooking range,
Electric stationary electric ovens,
Electric induction hobs
Washing machines
IEC 60335-2-73 Ed.2.0(2002)
Household and similar electrical appliances - Safety - Part
2-73: Particular requirements for fixed immersion heaters
Electric fixed immersion heaters
29
IEC 60335-2-74 Ed.2.0(2002)
Household and similar electrical appliances - Safety - Part
2-74: Particular requirements for portable immersion
heaters
Portable immersion heaters
30
IEC 60335-2-8 Ed.5.0(2002)
Household and similar electrical appliances – Safety –
Part 2-8: Particular requirements for shavers, hair clippers
and similar appliances
Electrical hair clippers,
28
Electrical shavers
31
IEC 60335-2-80 Ed.2.0(2002)
Household and similar electrical appliances - Safety - Part
2-80: Particular requirements for fans
Table or standing fans,
Electric table fans & regulators,
Electric ventilating fan & regulators,
Electric moving-louvre fans & regulators,
Electric ceiling fans & regulators,
Electric wall fans & regulators,
Electric auto fans & regulators,
Electric pedestal fans & regulators
32
IEC 60335-2-9 Ed.5.0(2002)
Household and similar electrical appliances - Safety - Part
2-9: Particular requirements for grills, toasters and similar
portable cooking appliances
Toasters, grills, roasters and similar appliances,
Electrical portable ovens,
Electrical grillers,
Electrical roasters,
Electric bread makers,
Electric bread toasters,
Electric sandwich makers / Waffle makers
Electric stoves; open type heating elements
Electrical Multi-Purpose Cookers
33
IEC 60335-2-98 Ed.2.0(2002)
Household and similar electrical appliances - Safety - Part
2-98: Particular requirements for humidifiers
Electric air coolers
34
35
IEC 60950-1 Ed.1.0(2001)
IEC 60034-1 Ed.11.0 (2004)
Information technology equipment - Safety - Part 1:
General requirements
Home Computer System (inclusive of monitor, printer,
speaker and other mains operated accessories)
Rotating electrical machines - Part 1: Rating and
performance
Electric motors and generators
36
IEC 60064 Ed.6.3 (2005)
Tungsten filament lamps for domestic and similar general
lighting purposes - Performance requirements
Incandescent lamps
37
IEC 60081 Ed. 5.1 (2002)
Double-capped fluorescent lamps - Performance
specifications
- Fluorescent Lamp: Safety requirements
- Double capped fluorescent lamps – Performance
38
IEC 60155 Ed.4.0 (1993), am.1(1995),
am2(2006)
Glow-starters for fluorescent lamps
Glow-starters for fluorescent lamps
Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 1: General requirements
PVC insulated copper cable
IEC 60227-3 Ed. 2.1(1997)
Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 3: Non-sheathed cables for
fixed wiring
PVC insulated copper cable Non-shreated cable for
fixed wiring
41
IEC 60227-4 Ed. 2.1(1997)
Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 4: Sheathed cables for
fixed wiring
PVC insulated copper cable Shreated cable for fixed
wiring
42
IEC 60227-5 Ed. 2.2(2003)
Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 5: Flexible cables (cords)
PVC insulated copper cable Flexible cables (cord)
43
IEC 60227-6 Ed.3(2001)
Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 6: Lift cables and cables
for flexible connections
PVC insulated copper cable Lift cable and cable for
flexible connections
44
IEC 60227-7 Ed. 1.1(2003)
Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 7: Flexible cables screened
and unscreened with two or more conductors
PVC insulated copper cable Flexible cable screened
and unscreened with two or more conductors
39
40
IEC 60227-1 Ed 3.0 (2007)
Edison screw lampholders
Edison Screw lamp holders
IEC 60245-1 Ed.4.0(2003)
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 1: General requirements
Rubber insulated cord and flexible cables
IEC 60245-3 Ed.2.0(1994), am1(1997)
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 3: Heat resistant silicone
insulated cables
Heat resistant silicone insulated cables
47
48
IEC 60245-4 Ed.2.2(2004)
Cords and flexible cables
49
IEC 60245-5 Ed.2.0(1994), am1(2003)
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 4: Cords and flexible cables
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 5: Lift cables
50
IEC 60245-6 Ed.2.0(1994), am1(1997),
am2(2003)
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 6: Arc welding electrode cables
Arc welding electrode cables
51
IEC 60245-7 Ed.1.0(1994) , am1(1997)
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 7: Heat resistant ethylene-vinyl
acetate rubber insulated cables
Heat resistant ethylene-vinyl acetate rubber insulated
cables
52
IEC 60245-8 Ed.1.1(2004)
Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 8: Cords for applications
requiring high flexibility
53
IEC 60269-1 Ed.4.0(2006)
Low-voltage fuses - Part 1: General requirements
- Fuse Base & Carrier up to 32A
IEC 60269-2 Ed.3.0 (2006)
Low-voltage fuses - Part 2: Supplementary requirements
for fuses for use by authorized persons (fuses mainly for
industrial application) - Examples of standardized systems
of fuses A to J
- Fuses / Fuse Links up to 63A
45
IEC 60238 Ed.8.0(2004)
46
54
Lift cables
Cords for applications requiring high flexibility
55
IEC 60269-3 Ed.3.0(2006)
Low-voltage fuses - Part 3: Supplementary requirements
for fuses for use by unskilled persons (fuses mainly for
household or similar applications) - Examples of
standardized systems of fuses A to F
56
IEC 60269-4 Ed.4.0(2006)
Low-voltage fuses - Part 4: Supplementary requirements
for fuse-links for the protection of semiconductor devices
57
IEC 60320-1 Ed.2.0(2001)
Appliance couplers for household and similar general
purposes - Part 1: General requirements
- Appliance Connectors
58
IEC 60320-2-1 Ed.2.0(2000)
Appliance couplers for household and similar general
purposes - Part 2-1: Sewing machine couplers
- Inter connection Coupler
59
IEC 60320-2-2 Ed.2.2(1998)
Appliance couplers for household and similar general
purposes - Part 2-2: Interconnection couplers for
household and similar equipment
Interconnection couplers for household and similar
equipment
60
IEC 60320-2-3 Ed.1.1(2005)
Appliance couplers for household and similar general
purposes - Part 2-3: Appliance couplers with a degree of
protection higher than IPX0
Appliance couplers with a degree of protection higher
than IPX0
61
IEC 60320-2-4 Ed.1.0(2005)
Appliance couplers for household and similar general
purposes - Part 2-4: Couplers dependent on appliance
weight for engagement
Couplers dependent on appliance weight for
engagement
62
IEC 60400 Ed.6.0(1999), am1(2002)
63
64
- Low-voltage distribution link Fuses
fuse-links for the protection of semiconductor devices
Lampholders for tubular fluorescent lamps and
starterholders
Lamp holders and starter holders for tubular
fluorescent lamps
IEC 60432-1 Ed.2.1(2005)
Incandescent lamps - Safety specifications - Part 1:
Tungsten filament lamps for domestic and similar general
lighting purposes
Tungsten filament lamps for domestic and similar
general lighting purposes
IEC 60432-2 Ed.2.0(1999)
Incandescent lamps - Safety specifications - Part 2:
Tungsten halogen lamps for domestic and similar general
lighting purposes
Tungsten halogen lamps for domestic and similar
general lighting purposes
65
IEC 60432-3 Ed.1.0(2002)
66
IEC 60454-3-1 Ed.2.1(2002)
67
IEC 60598-1 Ed.6.0(2003)
68
Incandescent lamps - Safety specifications - Part 3:
Tungsten halogen lamps (non-vehicle)
Tungsten halogen lamps (non-vehicle)
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials - Sheet 1:
PVC film tapes with pressure-sensitive adhesive
PVC tapes for electrical insulation
Luminaires - Part 1: General requirements and tests
Luminaries
IEC 60598-2-1 Ed.1.0(1979), am.1(1987)
Luminaires. Part 2: Particular requirements. Section One:
Fixed general purpose luminaires
Fixed general purpose luminaries
69
IEC 60598-2-2 Ed.2.1(1997)
Luminaires - Part 2-2: Particular requirements - Recessed
luminaires
Recessed luminaries
70
IEC 60598-2-4 Ed.2.0(1997)
Luminaires - Part 2: Particular requirements - Section 4:
Portable general purpose luminaires
Portable general purpose luminaires
71
IEC 60598-2-8 Ed.2.1(2001)
Luminaires - Part 2-8: Particular requirements Handlamps
Hand Lamps
72
IEC 60598-2-20 Ed.2.2(2002)
Luminaires - Part 2-20: Particular requirements - Lighting
chains
- Decorative Light fixture
- Lighting Chains
73
IEC 60669-1 Ed.3.1(2000)
Switches for household and similar fixed-electrical
installations - Part 1: General requirements
- General purpose switches
- Domestic electric wall switch
- Knife switches and reverse knifes witches
74
75
IEC 60669-2-1 Ed.4.0(2002)
Switches for household and similar fixed electrical
installations - Part 2-1: Particular requirements Electronic switches
Electronic Switch
IEC 60669-2-2 Ed.2.1(2002)
Switches for household and similar fixed electrical
installations - Part 2-2: Particular requirements Electromagnetic remote-control switches (RCS)
Electromagnetic Remote Control Switch
76
IEC 60669-2-3 Ed.3.0(2006)
Switches for household and similar fixed electrical
installations - Part 2-3: Particular requirements - Timedelay switches (TDS)
Time Delay Switches
77
IEC 60745-2-1 Ed.2.0(2003)
Hand-held motor-operated electric tools - Safety - Part 21: Particular requirements for drills and impact drills
Electric Drill
78
IEC 60745-2-3 Ed.2.0(2006)
Hand-held motor-operated electric tools - Safety - Part 23: Particular requirements for grinders, polishers and disk- Electric Grinders ( up to 100 mm )
type sanders
79
IEC 60745-2-4 Ed.2.0(2002)
Hand-held motor-operated electric tools - Safety - Part 24: Particular requirements for sanders and polishers other Electric Sanders (up to 300 W)
than disk type
80
IEC 60745-2-5 Ed.3.0(2003)
Hand-held motor-operated electric tools - Safety - Part 25: Particular requirements for circular saws
Electric Circular Saws and circular knives (Cutting Blade
up to 160 mm)
IEC 60745-2-7 Ed.1.0(1989)
Safety of hand-held motor-operated electric tools. Part 2:
Particular requirements for spray guns for non-flammable
liquids
Electric spray guns for non-flammable liquids (up to 100
bars)
82
IEC 60745-2-11 Ed.2.0(2003)
Hand-held motor-operated electric tools - Safety - Part 211: Particular requirements for reciprocating saws (jig and Electric Jig and Saber Saws (up to 60 mm)
sabre saws)
83
IEC 60745-2-14 Ed.2.0(2003)
Hand-held motor-operated electric tools - Safety - Part 214: Particular requirements for planers
84
IEC 60745-2-15 Ed.2.0(2006)
Hand-held motor-operated electric tools - Safety - Part 215: Particular requirements for hedge trimmers
85
IEC 60745-2-17 Ed.2.0(2003)
Hand-held motor-operated electric tools - Safety - Part 217: Particular requirements for routers and trimmers
81
Electric Planers (up to 500 W)
- Electric hedge trimmers and Grass shears (up to 750
W)
- Trimmers (up to 300 W)
Electric Routers and trimmers (up to 500 W)
Electrical accessories - Circuit-breakers for overcurrent
protection for household and similar installations - Part 1:
Circuit-breakers for a.c. operation
Circuit-breakers for ac operation
Circuit-breakers for overcurrent protection for household
and similar installations - Part 2: Circuit-breakers for a.c.
and d.c. operation
Miniature Circuit Breaker
IEC 60947-2 Ed.3.0(2003)
Low-voltage switchgear and controlgear - Part 2: Circuitbreakers
Low voltage switchgear and control gear – Part 2: Circuit
breakers
89
IEC 60947-3 Ed.2(1999)
Low-voltage switchgear and controlgear - Part 3:
Switches, disconnectors, switch-disconnectors and fusecombination units
Switch Fuse up to 63A
90
IEC 60968 Ed.1.2(1999)
Self-ballasted lamps for general lighting services - Safety
requirements
Self ballast lamp for general lighting service
91
IEC 60969 Ed.1.2(2001)
Self-ballasted lamps for general lighting services Performance requirements
Self-ballasted lamps for general lighting services
92
IEC 60998-1 Ed.2.0(2002)
Connecting devices for low-voltage circuits for household
and similar purposes - Part 1: General requirements
Cable Connectors-(connecting device)
86
IEC 60898-1 Ed.1.0(2002)
87
IEC 60898-2 Ed.1.0(2000)
88
93
IEC 60998-2-1 Ed.2.0(2002)
94
IEC 60998-2-2 Ed.2.0(2002)
Connecting devices for low-voltage circuits for household
and similar purposes - Part 2-1: Particular requirements
for connecting devices as separate entities with screwtype clamping units
Connecting devices for low-voltage circuits for household
and similar purposes - Part 2-2: Particular requirements
for connecting devices as separate entities with screwlesstype clamping units
Connecting devices as separate entities with screw-type
clamping units
Connecting devices as separate entities with screwlesstype clamping units
95
96
97
98
99
IEC 60998-2-3 Ed.2.0(2002)
IEC 60998-2-4 Ed.2.0(2004)
Connecting devices for low-voltage circuits for household
and similar purposes - Part 2-3: Particular requirements
for connecting devices as separate entities with insulation- Connecting devices as separate entities with insulationpiercing clamping units
piercing clamping units
Connecting devices for low-voltage circuits for household
and similar purposes - Part 2-4: Particular requirements
for twist-on connecting devices
- Connecting box
IEC 61009-1 Ed.1.0(1996), am1(2002)
Residual current operated circuit-breakers with integral
overcurrent protection for household and similar uses
(RCBOs) - Part 1: General rules
IEC 61009-2-1 Ed.1.0(1991)
Residual current operated circuit-breakers with integral
overcurrent protection for household and similar uses
(RCBO's) - Part 2-1: Applicability of the general rules to
RCBO's functionally independent of line voltage
IEC 61009-2-2 Ed.1.0(1991)
Residual current operated circuit-breakers with integral
overcurrent protection for household and similar uses
(RCBO's) - Part 2-2: Applicability of the general rules to
RCBO's functionally dependent on line voltage
Auxiliaries for lamps - Capacitors for use in tubular
100 C 61048 Ed.1.0 (1991), am1(1995),am2(199fluorescent and other discharge lamp circuits - General
and safety requirements
101
IEC 61049 Ed.1.0 (1991)
102
EC 61347-2-2 Ed.1.0(2000)
- Cable Connectors
Residual Current Operated Circuit-Breakers with Integral
Overcurrent Protection for household and similar uses
(RCBOs)
Capacitors for use in tubular fluorescent lamp circuit
Capacitors for use in tubular fluorescent and other
discharge lamp circuits. Performance requirements
Capacitors for use in tubular fluorescent and other
discharge lamp circuits
Lamp controlgear - Part 2-2: Particular requirements for
d.c. or a.c. supplied electronic step-down convertors for
filament lamps
Isolating Transformer
103
IEC 61347-2-3 Ed.1.0(2000)
Lamp control gear - Part 2-3: Particular requirements for
a.c. and/or d.c. supplied electronic control gear for
fluorescent lamps
Ballast for tubular fluorescent lamp (electronic ballast)
104
IEC 61347-2-8 Ed.1.0(2000)
Lamp controlgear - Part 2-8: Particular requirements for
ballasts for fluorescent lamps
Ballast for tubular fluorescent lamp (magnetic ballast)
IEC 61558-2-5 Ed.1.0(1997)
Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-5: Particular requirements
and test for transformer for shavers, power supply units
for shavers and shaver supply units
Electric Shaver Socket Outlets
IEC 61558-2-6 Ed.1.0 (1997)
Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 26: Particular requirements and tests for safety isolating
transformers and power supply units incorporating safety
isolating transformers
105
106
AC-DC or AC-AC Converter (Adaptor)
- Isolating Transformer
- Adaptor for electrical appliances
107
IEC 62040-1-1 Ed.1.0 (2004),
108
IEC 62040-1-2 Ed.1.0 (2004)
109
IEC 62040-2 Ed.2.0(2005)
110
CISPR 15 Ed.5.2 (1999)
111
IEC 60065 (2001-12)
Uninterruptible power systems (UPS)
- Part 1-1: General and safety requirements for UPS used
in operator access areas
Uninterruptible power systems (UPS) - Part 1-2: General
and safety requirements for UPS used in restricted access
locations
Uninterruptible power system
Uninterruptible power systems (UPS) - Part 2:
Electromagnetic compatibility (EMC) requirements
Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment
Lighting and similar equipment : radio disturbance limits
Audio, video and similar electronic apparatus —Safety
requirements
Audio, video and similar electronic apparatus —Safety
requirements
112
IEC 60086-1 (2000)
113
IEC 60086-2 (2000)
114
IEC 60227-1 (depends on Part 2, 3, 4 and
5 accordingly)
115
IEC60335-2-34 Ed.4.0 (2002)
Primary batteries - Part 1: General
Primary batteries - Part 2: Physical and electrical
specifications
Household and similar electrical appliances - Safety - Part
2-34: Particular requirements for motor-compressors
IEC 60335-2-41 (1996)
117
IEC 60884-1 ed 3 (2002-06)
118
IEC 61347-1 (2000-10)
119
IEC 61008.1 (1996)
Primary battery – Part 2 : Electrical and physical
requirements
PVC insulated cables of rated voltages up to and
including 450/750 V- Part 1: General requirements
Household and similar electrical appliances – Safety –
Part 2-41: Particular requirements for pumps
116
Primary battery – Part 1 : General
Plug and socket outlets for household and similar
purposes - Part 1: General requirement
Lamp controlgears - Part 1: General and safety
requirements
Residual current operated circuit breakers without integral
overcurrent protection for household and similar uses
(RCCB) - Part 1: General rules)
Motor-compressors
Pumps for liquids having a temperature not exceeding
35 °C
Plug and socket outlets
RCCB
120
IEC 61008.2.1 (1990)
121
IEC 60598-2-3 (2002)
122
IEC 60598-2-5 (1998)
Residual current operated circuit-breakers without integral
overcurrent protection for household and similar uses
(RCCB's). Part 2-1: Applicability of the general rules to
RCCB's functionally independent of line voltage
Luminaires - Part 2-3: Particular requirements Luminaires for road and street lighting
Luminaires - Part 2-5: Particular requirements - Floodlights
Luminaires
ตารางแสดง UNECE Regulations 19 รายการแรก ภายใต้ AP MRA
ที่
UN ECE
Regulations No.
ชื่อผลิตภัณฑ์
รถยนต์
1
13
Braking System
2
13H
Braking System (Passenger Car)
3
14
Seat belt anchorage
4
16
Seat belt
5
17
Seats
6
25
Head Restraints
7
30
Pneumatic tyre – passenger
8
43
Safety glass
9
46
Rear View Mirror
10
49
Exhaust Emission 4
11
51
Noise emission
12
54
Pneumatic tyre – commercial
13
79
Steering Equipment
14
83
Exhaust Emission
รถจักรยานยนต์
15
28
Audible Warning Devices
16
39
Speedometer
17
40
Exhaust Emission
18
41
Noise emission
19
75
Tyre
04/01/55
Member Country : Cambodia_________
Date of Submission : ______18 August 2008___________ (deadline end April 2007)
Submitted by : _______Chan Sopha_____________________
E-mail address : discinfo@camnet.com.kh
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 1 - National Standards for Construction Materials
National Standards (NS)
No : Year
(Construction Materials)
Title of NS
CS 0070:2004
Standard for Cement concrete block
CS 0071: 2004
Standard for Emulsion paints
CS 0073: 2004
Standard for Portland Cement
CS 0074: 2004
Standard for Ribbed still bars
CS 0077: 2004
Standard for Ceramic titles
CS 0082: 2004
Standard for corrugated steel roof
CS 0094: 2004
CS 00103: 2004
Standard for PVC pipes and fitting
Standard for Testing method for Portland cement
CS 00 104: 2004
Standard for Common Burnt Clay Building Bricks
Remarks
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative Requirements
(AR) – Reference No.
Brief Description / or Title of TR / AR
Remarks
(State TR or AR)
Draft
Law on Construction
TA
Construction Law and Regulations
Sub-decree on controlling of Construction
Materials
Regulation on construction management
Regulation on Construction Design and
registration
TA
TA
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulatiors
Item
Name
Mr. Chan Borin
Position
Department
Deputy Director Department of
Industrial
Standards of
Cambodia
Address
#538, National Rd. 2,
Sangkat Chak-Ang-Releu,
Mean Chey, Phnom Penh
Tel
Fax
E-mail
855-12-751571 855-23-425052 discinfo@camn
et.com.kh or
chanborin@mo
bitel.com.kh
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative Requirements
(AR) – Reference No.
REGULATION INDUSTRYMINISTER
OFTHE REPUBLIC OFINDONESIANO :
20/M-IND/PER/2/2011
REGULATION INDUSTRYMINISTER
OFTHE REPUBLIC OFINDONESIA NO :
Brief Description / or Title of TR / AR
Mandatory implementation of standard for:
1. 07-2054-2004, Hot-rolled right angle profile steels
2. 07-0329-2005, Hot rolling mill I-beam profile steel
3. 07-0052-2006, Hot-rolled channel-U steel profiles (Bj
P channel-U)
4. 07-7178-2006, Hot-rolled WF-beam steel profiles (Bj
P WF-beam)
5. 07-2610-1992, H-beam steel profile (replaced by
SNI 2610:2011)
Mandatory implementation of standard for:
15-0047-2005, Sheet glass
4/M-IND/PER/1/2010
REGULATION INDUSTRYMINISTER
OFTHE REPUBLIC OFINDONESIA
NO: 35/M-IND/PER/4/2007
Mandatory implementation of standard for:
1. SNI 15-3500-2004 Mixed portland cement
SNI 15-0129-2004 White portland cement
2. SNI 15-0302-2004 Pozzolanic portland cement
3. SNI 15-2049-2004 Portland cement
4. SNI 15-3758-2004 Masonry cement
5. SNI 15-7064-2004 Portland composite cement
Remarks
(State TR or AR)
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulators
Item
2
2
Name
Agus Sarwono
Azriadi
Position
Department
Address
Tel.
Director
of
Standard
SubDivisi
on
Head Of
PIC
Standard
Division
Fax
E-mail
Ministry of Public
works – Agency for
Research and
Development –
Research Institute for
Human Setlement
Pusat Pemukiman
kementerian PU
62 815
73178333
022 7798392
Sarwonoags60@yahoo.c
om
Ministry of Industry,
Agency for
Assesmentof
Industrial Policy
Climate and Quality
– Center for
Standardization
Kementerian
Perindustrian
6221 5252690
6221 5252690
jangceg@yahoo.com
Jalan Panyawungan
Cileunyi – Kab.Bandung
40393
Jalan Gatot Subroto
Kav.52-53 20th floor
Jakarta Selatan 12950
No.
National Standard No.
Title of NS
1
2
3
4
5
6
7
SNI 03-6375-2000
SNI 06-2412-1991
SNI 06-2413-2002
SNI 06-2420-1991
SNI 06-2421-1991
SNI 06-2422-1991
SNI 06-2427-1991
Sampling methods of water from closed conduits
Sampling method of water quality
Test methods for solid matter content in water
Test method for alkalinity in water by titrimetry
Test method for alkalinity in water by potentiometric
Water, Test method for acidity by titrimetry
Water, Test method for potassium by atomic absorption
spectrophotometer apparatus
8
SNI 06-2428-1991
Water, Test method for atom by atomic absorption
spectrophotometer apparatus
9
10
SNI 06-2430-2002
SNI 06-2462-1991
Test method for magnesium content in water
Test method for mercury in water by spectrophotometer
cold atomization
11
SNI 06-2470-1991
Water, Test method for sulfida content by selective meter
ion apparatus
12
SNI 06-2471-1991
Water, Test method for cobalt content by atomic
absorption spectrofotometer apparatus in direct manuver
13
SNI 06-2472-1991
Test method for cobalt contentin water by carbon stove
atomic absorption spectrophotometer apparatus
14
SNI 06-2473-1991
Water, Test method for cobalt content by atomic
absorption spectrophotometer in an extraction manuver
15
SNI 06-2474-1991
Water, Test method for cyanida content by selective ion
apparatus
16
SNI 06-2475-1991
Water, Test method for selenium content by carbon stove
atomic absorption spectrophotometer apparatus
17
SNI 06-2479-1991
Water, Test method for ammonium content by
spectrophotometer apparatus in a Nessler manuver
18
SNI 06-2480-1991
Water, Test method for nitrate content by
spectrophotometer in a sulphate brusin manuver
19
SNI 06-2481-1991
Water, Test method for boron content by
spectrophotometer in a curcumium manuver
20
SNI 06-2482-1991
Water, Test method for flouride content by
spectrophotometer in a red alazaryn manuver
Remarks
21
SNI 06-2483-1991
Water, Test method for total phosphate and
orthophosphate content by spectrophotometer in a
ascorbic acid
22
SNI 06-2484-2002
Test method for nitrite content in water by colorymetry
23
SNI 06-2503-1991
Water, Test method for biochemical oxygen demand
24
SNI 06-2505-1991
Water, Test method for total organiccarbon content by
infra red KOT analyzer
25
SNI 06-2508-1991
Water, Test method for organic chlorpesticide content by
gas chromotography apparatus
26
SNI 06-2509-1991
Water, Test method for carbonate pesticide content by
gas chromatography apparatus
27
SNI 06-2510-1991
Water, Test method for organic phosphate content by gas
chromatography apparatus
28
SNI 06-2513-1991
Water, Test method for chromium content by carbon stove
atomic absorption spectrophotometer apparatus
29
SNI 06-2515-1991
Water, Test method for copper content by atomic
absorption spectrophotometer in an extraction manuver
30
SNI 06-2516-1991
Water, Test method for copper content by carbon stove
atomic absorption spectrophotometer apparatus
31
SNI 06-2912-1992
Test method for mercury content in water using
mercurymeter apparatus
32
SNI 06-2913-1992
Test method for arsenic content in water using atomic
absorption apparatus in borohidrid sodium manuver
33
34
SNI 06-3963-1995
SNI 06-4138-1996
Test method for species and total plankton in water
Test method for soluble ferrous in water by
spectrophotometer apparatus using fenantrolin
35
SNI 06-4139-1996
Test method for aggressive carbon dioxide content in
water by titrimetric
36
SNI 06-4140-1996
Test method for primary productivity in water by soluble
oxigen measurement
37
SNI 06-4157-1996
Test method for chlorophyl A phytoplankton content in
water by spectrophotometer
38
SNI 06-4158-1996
Test method for total bacteria coli in water using
fermentation tube
39
SNI 06-4159-1996
Test method for carbon chloroform extract content in
water by graphimetric method
40
SNI 06-4162-1996
Test method for silver content in water by atomic
absorption spectrophotometer apparatus in carbon stoves
manuver
41
SNI 06-4822-1998
Test method for manganese content in water by
spectrophotometer in persulphate manner
42
SNI 06-4823-1998
Test method for tin content in water by atomic absorption
spectrophotometer in carbon stove manner
43
SNI 06-4824-1998
Test method for free chlorine content in water by visible
light spectrophotometer in diethyl phenylendiamine (DPD)
44
SNI 06-6875-2002
Test methods of sulphides content in water by iodometry
45
SNI 19-1662-1989
Water and waste water, Test method for nitrite content
46
SNI 19-2454-2002
Manual for technical operation of municifal waste
management
47
SNI 19-3956-1995
Test method for total feces bacteria coli in water by
membrane filter
48
SNI 19-3957-1995
Test method for total feces bacteria coli in water by
fermentation tube
49
SNI 19-3964-1995
Test method for sampling and measurement of pile and
composition of urban garbage
50
SNI 19-3983-1995
Specification of garbage pile for small and medium city in
Indonesia
51
SNI 19-4841-1998
Test method for NOx content in air using
spectrophotometer
52
SNI 19-4842-1998
Test method for O3 gas content in air by using
spectrophotometer
53
SNI 19-4843-1998
Test method for hydrocarbon (HC) gas content in air using
chromatography gas apparatus
54
SNI 19-4844-1998
Test method for hydrogen sulphide (H2S) concentration
in air using spectrophotometer air sampler (HVS)
55
SNI 19-4845-1998
Test method for CO gas content in air using non
dispersive infrared (NDR)
56
SNI 19-6409-2000
Sampling methods of uncompacted wastes from trucks
57
SNI 19-6447-2000
Performance tests for activated sludge processing
installation
58
SNI 19-6449-2000
Test method for coagulation-flocculation by jar method
59
SNI 19-6470-2000
Methods for air pressurization system of fire-isolated exits
60
61
62
SNI 19-6718-2002
SNI 19-6772-2002
SNI 19-7029-2004
Specification of the fire dampers
Procedure for the FM - 200 fire extinguisher system
Individual and communal household composting
equipment specification
63
64
SNI 19-7030-2004
SNI 05-6395-2000
Specification of domestic organic garbage compost
Specification of orifice discharge measuring instrument
65
SNI 05-6414-2000
Specification for weighing devices used in the testing of
materials
66
67
SNI 19-6421-2000
SNI 19-6457-2000
Standard specification of thermometers
Methods for basic human body measurements for
technological design
68
SNI 19-6463-2000
Method for calibration of bourdon manometers by dead
weight tester
69
70
SNI 19-6878-2002
SNI 19-6784-2002
Test methods for L10 and Leq street write level
Test methods for coagulation, flocculation and presurred
filtration
71
SNI 05-6437-2000
Performance test method for pumps using test model
72
SNI 06-2548-1991
PVC pipes for dringking water, Test method for outside
diameter by vernier callipers
73
SNI 06-2549-1991
PVC pipes for dringking water, Test method for strength to
hydrostatic pressure
74
SNI 06-2550-1991
PVC pipes for dringking water, Test method for wall
thickness
75
SNI 06-2551-1991
PVC pipes for dringking water, Test method for shape and
visible characteristics
76
77
SNI 06-2552-1991
SNI 06-2553-1991
PVC pipes for drinking water, Method for sampling
PVC pipes for dringking water, Test method for change of
length by stove method
78
SNI 06-2554-1991
PVC pipes for dringking water, Test method for constancy
to chlorida methylene
79
SNI 06-2555-1991
PVC pipes for dringking water, Test method for PVC
content by TFH
80
SNI 06-2556-1991
PVC pipes for dringking water, Test method for outside
diameter by meter band
81
SNI 06-4821-1998
Test method for dimension of polyethylene (PE) pipes for
dringking water
82
SNI 06-4828-1998
Specification for dringking water, waste water and rain
water pipe fitting rubber seal rings
83
84
SNI 06-4829-2005
SNI 07-0242.1-2000
85
SNI 07-6404-2000
Specification of steel pipe flanges for water supply size
110 mm-366 mm
86
SNI 19-6778-2002
Test method for natural pressure on mechanical fittings of
PE pipelines
87
SNI 19-6779-2002
Test method for polyethilene pipes (PE) alteration of
elongation
88
SNI 19-6780-2002
Determination method for black pokyethilene (PE) and uncolour PE pipes it's fittings
89
SNI 19-6781-2002
Test method for the lost of pressure on mechanical fittings
systems of PE pipes
90
SNI 19-6782-2002
Procedure for the installation of ductile - iron and their
appurtenance
91
92
SNI 19-6783-2002
SNI 07-6443-2000
Desinfection specification for clean water pipelines
Test method for locating the thinnest spot in a zinc
(galvanized) coating on iron or steel by preece test
93
SNI 19-6739-2002
Examination methods for type capacity and
transmissivitas estimation on tested wells
94
SNI 19-6741-2002
Examination method for pressure aquiver transmissivity
by using of slug test code
95
SNI 19-6742-2002
Examination method for slug on the field for the
determination of aquiver hydraulic properties
96
SNI 19-6743-2002
Examination methods for aquiver hydraulic propeties by
using of Theis code
97
SNI 19-6744-2002
Procedure for test method selection of aquiver hydraulic
properties buy using of well technique
98
SNI 19-6745-2002
Determination method of coordinat points by using of a
couple of sextant
99
SNI 19-6746-2002
Determination method for coordinate position by using of
trisponder
100
SNI 06-3822.1-2000
101
102
SNI 06-6396-2000
SNI 06-2432-1991
Polyethylene pipes for drinking water
Specification for black and hot-dipped zinc-coated
(galvanized) welded and seamless steel pipes
Specification for poly aluminium chloride for water
treatment
Soda ash for water processing
Asphalt materials, Test method for dactility
103
104
105
SNI 06-2434-1991
SNI 06-2438-1991
SNI 06-2440-1991
Asphalt and tar, Test method for melting point
Asphalt materials, Test method for asphalt content
Oil and asphalt, Test method for lost heavy by A method
106
107
108
SNI 06-2441-1991
SNI 06-2456-1991
SNI 06-2488-1991
Solid asphalt, Test method for specific grafity
Asphalt materials, Test method for penetration
Liquid asphalt, Test method for fraction by distillation
method
109
110
SNI 06-2489-1991
SNI 06-2490-1991
Asphalt mixture, Test method by Marshall apparatus
Asphalt and material contain asphalt, Test methode for
water content
111
SNI 06-6441-2000
Test methods for viscosity of oil asphalt using Brookfield
thermosel apparatus
112
SNI 06-6472-2000
Method for sample preparation - Mixing, quartering and
conditioning of asphalt mixture in laboratory for
performance test
113
114
115
116
SNI 13-6788-2002
SNI 13-6789-2002
SNI 07-2529-1991
SNI 07-6401-2000
Test methods of peat material pH by pH meter
Methods of peat sediment thickness measurement
Concrete steel, Test method for tensile strength
Specification for cold-rolled steel wire for concrete
reinforcement
117
SNI 07-6402-2000
Specification for cold-formed welded and seamless
carbon steel structural tubing
118
SNI 07-6403-2000
Specification for low and medium tensile strength carbon
steel plates
119
SNI 07-6892-2002
Specification of zinc-coated (galvanized) steel woven wire
fence
120
121
SNI 03-6450-2000
SNI 06-6446.1-2000
Test methods for thermoplastic traffic line materials
Test method for specific gravity of epoxide resins and
hardeners
122
SNI 06-6446.2-2000
Test methods for viscosity of epoxy resins and hardeners
123
124
SNI 06-3685.1-2000
SNI 06-4167-1996
Specification for red lead ready-mixed paint
Test method for consistency of paint using viscometer
stormer apparatus
125
SNI 06-4825-1998
Specification of ready mixed white and yellow traffic paints
126
SNI 06-4826-1998
Specification of white and yellow reflective thermoplastic
traffic paints (solid form)
127
SNI 06-4827-1998
Specification of ready mix oil base paint
Under Revised
Under Revised
128
129
SNI 06-6397-2000
SNI 06-6445-2000
Specification for foliage green colour bridge paint
Test methods for volume non volatile matter in clear or
pigmented coatings
130
SNI 06-6452-2000
Test methods for bitumen paint used as protective coating
131
SNI 07-6398-2000
Method for liquid epoxy coating for interior and exterior
section of steel water pipelines
132
133
SNI 03-0028-1987
SNI 03-0054-1996
Cement floor tiles
Glazed ceramic wall tiles, Specification and test method
134
135
136
137
138
139
140
141
142
SNI 03-0078-1987
SNI 03-0096-1999
SNI 03-0106-1987
SNI 03-0122-1998
SNI 03-0136-1987
SNI 03-0152-1987
SNI 03-0348-1989
SNI 03-0349-1989
SNI 03-0394-1989
Cemen troffle
Concrete roof tiles
Ceramic floor tiles, Specification and test method
Gate valve type household faucet
Terrazzo tiles
Enamel coated steel bath tubs
Solid concrete bricks, Specification and test method
Concrete brick for wall system
Natural stones for building materials, Specification and
Test method
143
SNI 03-0450-1989
Test method for reactive alkaline properties of cement
with concrete aggregates using stirring rod.
144
SNI 03-0536-1989
Unglazed acid fastness ceramic floor tiles Specification
and test method
145
146
147
148
149
SNI 03-0573-1989
SNI 03-0579-1989
SNI 03-0580-1989
SNI 03-0662-1989
SNI 03-0675-1989
Aluminium alloy windows, General specifications
Chinesse vitreous type ceramic wash - basins
Pulp cement boards
Door key for simple housing
Wooden door frame and window frames, Dimensions
150
151
152
SNI 03-0680-1998
SNI 03-0687-1989
SNI 03-0688-1989
Chinesse vitreous squating toilet seats
Straight line clay pipes for unpressured water supply
Gooseneck type clay pipes for unpressured water supply
153
154
155
156
157
158
SNI 03-0689-1989
SNI 03-0690-1989
SNI 03-0691-1996
SNI 03-0797-2006
SNI 03-0808-1989
SNI 03-0962-1989
Terazzo bath tubs
Terazzo washing basin
Concrete brick (paving block)
Closets
Limestone filler for bituminous paving mixture
Steel wheel static road rollers, Performance test
159
160
161
162
SNI 03-1005-1989
SNI 03-1027-2006
SNI 03-1068-1989
SNI 03-1074-1989
Acrylic bathtubs, Specification
Chrysotile fibre cement flat sheets
Stone crusher
Falling object protectice structure (FOPS) canopies for
heavy machinery, Test method
163
164
SNI 03-1148-1998
SNI 03-1217-1989
Chinesse vitreous man urinoir
Seat cushion deflection and seatback for off road
machinery
165
SNI 03-1218-1989
Operator's seats for self actuating of road machinery,
Dimension
166
167
168
169
170
171
172
173
174
175
SNI 03-1223-1989
SNI 03-1296-1989
SNI 03-1329-1989
SNI 03-1331-2001
SNI 03-1455-1989
SNI 03-1570-1989
SNI 03-1578-1996
SNI 03-1588-1989
SNI 03-1718-1989
SNI 03-1726-2002
Performance test of steel wheel vibrating road rollers
PVC corrugated roof tile
Cement floor tiles, Term of acceptance
Ceramic mosaic floor tiles
Cement floor tile moulding
Perforated concrete bricks
Centrifugal reinforced concrete pipes
Aggregate laminated steel roof tiles
Elevators, Inspection and testing
Manual for seismic resistance designing for building
construction
176
SNI 03-1727-1989
Loading specification for houses and buildings, Guide for
design
177
178
SNI 03-1728-1989
SNI 03-1729-2002
Buildings, Guide for building up
Procedures of the design of concrete structures for
buildings
179
SNI 03-1730-2002
Codes for high school building construction planning
180
181
SNI 03-1733-2004
SNI 03-1734-1989
Codes of housing design in urban areas
Reinforced concrete and structure of reinforced wall for
houses and buildings, Guide for design
182
SNI 03-1749-1990
Aggregates for mix and concrete, Determination of grain
size
183
SNI 03-1750-1990
Aggregates for concrete, Specification and Test method
184
SNI 03-1751-1990
Weak parts, organic substance, sand hardness, crushed
stoned hardness, Determination
185
SNI 03-1753-1990
Coarse aggregates for concrete, Determination of fine
grain smaller than 70 mikron
186
SNI 03-1754-1990
Fine aggregates for mix and concrete, Determination of
fine grain smaller than 50 mikron
187
SNI 03-1755-1990
Fine aggregate for mix concrete, Determination of organic
substance content
188
SNI 03-1756-1990
Sand for mixture and concrete, Determination of hardness
189
SNI 03-1757-1990
Crushed stones or natural gravels as foundation of road
hardening and agregate for concrete, Determination of
hardness by Rudellof pressure vesels
190
SNI 03-1758-1990
Aggregates for mixture and concrete, Test method for
everlasting property towards sodium and magnesium
sulphate solution
191
SNI 03-1765-1990
Coarse aggregates for concrete, Test method for flat and
long grains.
192
193
SNI 03-1766-1990
SNI 03-1768-1990
Aggregates for concrete, Test method for grain
Aggregates for concrete, Test methods for reactive
properties against alkalin by chemical method
194
SNI 03-1871-1990
Steel wheel static road rollers, Standard accessories
195
SNI 03-1872-1990
Steel wheel static road rollers, Nomenclature and
specification
196
197
198
SNI 03-1963-1990
SNI 03-1968-1990
SNI 03-1969-1990
Modular coordination for buildings and houses
Coarse and fine aggregates, Test method
Coarse aggregates, Test method for specific grafity and
water absorption
199
SNI 03-1970-1990
Fine aggregates, Test method for specific gravity and
water absorption
200
201
202
203
204
205
SNI 03-1971-1990
SNI 03-1972-1990
SNI 03-1977-1990
SNI 03-1978-1990
SNI 03-1979-1990
SNI 03-2050-2006
Test method for water content of aggregates
Test method of concrete slump
Modulation coordination for buildings and houses
Preferred number for building and houses
Space and houses dimension, Specification
Chrysotile fibre sheets of symmetrical corrugated cement
206
207
208
SNI 03-2095-1998
SNI 03-2096-1991
SNI 03-2097-1991
Ceramic roof tiles
Ceramic floor tiles, Specification and test method
Lime for building material, Specification and test method
209
SNI 03-2113-2000
Lime trass bricks for walls
210
211
SNI 03-2114-1991
SNI 03-2126-1991
Asymmetrical corrugated asbestos cement sheets
Asbestos cement flat panel containing corrugated
asbestos cement
212
213
SNI 03-2134-1996
SNI 03-2150-1991
Glazed ceramic roof tile
Test method for optimum water content of soil
cement/lime using Proctor standards
214
SNI 03-2156-1991
Aerated light weight concrete block by autoclave process
215
SNI 03-2190.1-2000
General requirements for construction of hydraulic
transmission elevators
216
SNI 03-2190.2-2000
General requirement for electrical dumbwaiter elevators
217
SNI 03-2378-1991
Hollow space round profile prestressed concrete
telephone pole, 8 metre
218
SNI 03-2379-1991
Hollow space round profile prestressed concrete
telephone pole, 9 metre
219
220
SNI 03-2393-1991
SNI 03-2394-1991
Cement injection in stone, Code of practice
Nuclear medical building in hospital, Code for the design
221
222
SNI 03-2395-1991
SNI 03-2396-2001
Radilogical building in hospital, Code for the design
Codes for the design of natural lighting system of
buildings
223
224
SNI 03-2397-1991
SNI 03-2398-2002
Wind resistance simple buildings, Code for design
Codes for planning of septic tank with absorption systems
225
226
SNI 03-2399-2002
SNI 03-2404-1991
Codes for the design public bathrooms and toilets
Termites attack prevention in houses and buildings with
termisides, Code of practice
227
SNI 03-2405-1991
Termites protection in houses and buildings with
termisides, Code of practice
228
229
SNI 03-2406-1991
SNI 03-2417-1991
Urban drainage, General code for the design
Aggregate, Test method for weathering by Los Angeles
abration machine
230
SNI 03-2437-1991
Laboratory test method for determination of physical
characteristic parameter of stone sample
231
SNI 03-2439-1991
Aggregates, Test method for adhesiveness against
asphalt
232
233
SNI 03-2442-1991
SNI 03-2445-1991
Concrete curb for pavement, Specification
Wood for housing and buildings, Sizes
Under Revised
234
SNI 03-2447-1991
Roofed frame developing houses with precast concrete
component, Specification
235
SNI 03-2448-1991
Precast concrete component for roofed frame developing
houses, Specification
236
237
238
SNI 03-2449-1991
SNI 03-2450-1991
SNI 03-2452-1991
Pin beam timber frames, Type 15 -6, Specification
Pin beam timber frame type 30 - 6, Specification
Wooden roofed frame developing houses, Specification
239
SNI 03-2453-2002
Codes for the design of rain water absorption wells for
yard area
240
SNI 03-2457-1991
Aggregates for radiation shielding concrete, Test method
241
242
SNI 03-2458-1991
SNI 03-2460-1991
Freshly mixed concrete, Method for sampling
Ash as additional materials for concrete mix, Specification
243
SNI 03-2461-2002
Specification light aggregates for structural light concrete
244
SNI 03-2485-1991
Stones test specimens, Laboratory test method for
ultrasonic quick spreading and elastic constant
245
SNI 03-2486-1991
Stone test specimens, Laboratory test method for tensile
strength in indirect manuver
246
SNI 03-2491-2002
Test methods for splitting-tensile strength of concrete
247
248
SNI 03-2492-2002
SNI 03-2493-1991
Test and sampling methods of concrete cores
Conctrete test specimens, Method for making and curing
in laboratory
249
SNI 03-2494-2002
Specification of aggregates for radiation shielding
concrete
250
251
SNI 03-2495-1991
SNI 03-2496-1991
Additional materials for concrete, Specification
Air bubble formation additional materials for concrete,
Specification
252
SNI 03-2816-1992
Test method for organic waste in sand for mortar or
concrete mixture
253
SNI 03-2823-1992
Test method for flexible strength of stones by point load in
the middle
254
255
256
SNI 03-2824-1992
SNI 03-2825-1992
SNI 03-2826-1992
Direct shear test method for stones
Test method for uniaxial pressure strength of stones
Test method for elasticity moduls of stones at single axial
pressure
257
SNI 03-2834-2000
Methods for design of normal concrete mixes
258
SNI 03-2835-2002
Construction budget for building and housing construction Under Revised
land processing
259
260
SNI 03-2836-2002
SNI 03-2837-2002
Manual for unit price calculation of foundation work
Under Revised
Construction budget analysis for houses and buildings for Under Revised
cement floor work
261
SNI 03-2839-2002
Construction building analysis for houses and buildings
262
SNI 03-2840-1992
Code for working on asbestos cement sheets for roof
cover in houses and building
263
SNI 03-2841-1992
Code for working on asbestos cement sheets for wall in
houses and building
264
265
SNI 03-2845-1992
SNI 03-2846-1992
Code for the design of modular apartment
Code for the design of environment building density
apartment
266
267
SNI 03-2847-1992
SNI 03-2848-1992
Code for concrete structure calculation of building
Code for specimen production for rock mechanical testing
laboratory
268
269
270
271
272
273
274
275
276
SNI 03-2854-1992
SNI 03-2855-1992
SNI 03-2914-1992
SNI 03-2915-2002
SNI 03-2916-1992
SNI 03-2947-1992
SNI 03-2988-1998
SNI 03-3122-1992
SNI 03-3387-1994
Specification of ion chloride content in concrete
Specification of modular apartment units
Waterproof reinforced concrete, Specification
Specification of sulphatic proof concrete
Digging well for water resources, Specification
Chinesse vitreous bidet
Chinesse vitreouse monoblock sitted toilet
Lightweight concrete panels
Test methods for static pressure of manhole tops and
gally tops
277
SNI 03-3402-1994
Test method for volume weight of structural light concrete
278
SNI 03-3403-1994
Test method for pressure strength of drilling core
concrete.
279
280
SNI 03-3406-1994
SNI 03-3407-1994
Test method for durability of stone
Test method for form durability characteristics of stone to
sodium sulphate and magnesium sulphate solution
281
282
283
284
SNI 03-3416-1994
SNI 03-3418-1994
SNI 03-3419-1994
SNI 03-3421-1994
Aggregate, Test method for light particles
Test method for air content in fresh concrete
Test method for concrete abrassion in laboratories
Lightweight insulating concrete, Test method for tensile
strength in the field
Under Revised
285
SNI 03-3427-1994
Code for the design of building technique of swimming
pools
286
SNI 03-3430-1994
Housing and building, Code for the design hollow block
reinforced concrete structural wall
287
288
SNI 03-3434-2002
SNI 03-3435-1994
Code for unit price calculation of wood working
Housing and building, Code for unit price calculation of
ceiling cover work
289
SNI 03-3436-1994
Housing and building, Code for unit price calculation of
roof covering work.
290
291
SNI 03-3445-1994
SNI 03-3449-2002
Lightweight concrete panels, Code for installation
Manual for mix design of lightweight concrete with
lightweight aggregate
292
293
294
SNI 03-3456-1994
SNI 03-3529-1994
SNI 03-3625-1994
Elastomeric joint sealant, Specification
Shingle roof tile, Specification
Recommendation for measuring ultrasonic pulses speed
in concrete
295
SNI 03-3631-1994
Scaffolding, Specification and test method of statis
pressure
296
297
298
299
SNI 03-3646-1994
SNI 03-3647-1994
SNI 03-3790-1995
SNI 03-3795-1995
Guide for technical design of, Stadium building
Guide for technical design of sport building
Terms of acceptance of ceramic roof tiles
Coarse aggregates for concrete, Determination of the
grating worn down capacity and requirement for grating
worn down capacity using Los Angelos vessel
300
301
302
SNI 03-3976-1995
SNI 03-3981-1995
SNI 03-3982-1995
Code for mixing and pouring of concrete
Design code for slow-moving sand filter installation
Under Revised
Code of operation and maintanance of slow-moving sand Under Revised
filter installation
303
SNI 03-3984-1995
Specification of light aggregates for insulation concrete
304
305
306
307
308
SNI 03-4060-1996
SNI 03-4061-1996
SNI 03-4062-1996
SNI 03-4098-1996
SNI 03-4137-1996
PVC floor tiles
Granito floor tile
Glazed ceramic floor tiles
Split floor tiles
Test method for average thick and length of aggregates
309
SNI 03-4141-1996
Test method for clay lump and friable particle in
aggregates
310
SNI 03-4142-1996
Test method of amount material finer than 0,0075 mm
sieve in aggregates
311
312
SNI 03-4147-1996
SNI 03-4154-1996
Specification of lime for soil stabilization
Test method for flexural strength of concrete using simple
beam with center-point loading
313
SNI 03-4155-1996
Test method for compressive strength of concrete using
portion of beams broken flexure test specimens
314
315
SNI 03-4156-1996
SNI 03-4164-1996
Test method of bleeding of concrete
Test method for pressure strength of red brick walls in
laboratory
316
SNI 03-4165-1996
Test method for flexural strength of red brick walls in
laboratory
317
SNI 03-4166-1996
Test method for shear strength of red brick walls in
laboratory
318
SNI 03-4169-1996
Test method for static modulus of elasticity and poison's
ratio of concrete by compresometer
319
320
321
322
323
SNI 03-4252-1996
SNI 03-4255-1996
SNI 03-4358-1996
SNI 03-4360-1996
SNI 03-4383-1996
Concrete railing
Aggregate laminated Al - Zn alloy steel roof tiles
Asbestos cement roof tile sheets
Fire resistance doors for buildings
Installation of ABS pipe system (Acrylonitrile Butadiene
Styrene)
324
325
SNI 03-4423-1997
SNI 03-4426-1997
Asbestos fibre for building materials
Test method for agregat resistance by crash equipment
326
SNI 03-4428-1997
Test method for plastic fine aggregates or sand by sand
equivalent method.
327
SNI 03-4430-1997
Test method of concrete structure element by concrete
hammer, N dan NR type
328
SNI 03-4431-1997
Test method for flexural strength of normal concrete by
two point loading
329
330
331
SNI 03-4433-1997
SNI 03-4802-1998
SNI 03-4803-1998
Specification for ready for use concrete
Method for pulse velocity through concrete
Method for rebound number of hardened concentrate
332
333
SNI 03-4804-1998
SNI 03-4805-1998
Test method for unit weight and voids in aggregates
Test method for portland cement content of hardened
hydraulic cement concrete
334
SNI 03-4806-1998
Test method for cement portland content of freshly mixed
concrete by volumetric tritation
335
SNI 03-4807-1998
Test method for determining the temperature of freshly
mixed portland cement concrete
336
SNI 03-4808-1998
Test method for water content of freshly mixed concrete
by volumetric titration
337
SNI 03-4809-1998
Test method for comparing concrete on the basic of the
bond developed with reinforcing steel
338
SNI 03-4810-1998
Method for making and curing concrete test specimen in
the field
339
340
341
SNI 03-4811-1998
SNI 03-4812-1998
SNI 03-4814-1998
Creep testing method for concrete in compression
Test method for direct tensile strength of concrete
Specification for concrete joint sealer hot poured elastic
type
342
SNI 03-4815-1998
Specification for preformed expansion joint fillers for
concrete paving and structural construction
343
344
SNI 03-4817-1998
SNI 03-4818-1998
Specification for sheet materials for curing concrete
Specification for hollow concrete pipes for drainage
channel in earth
345
SNI 03-4820-1998
Method for using apparatus for the determination of lenght
change hardened cement paste, mortar, and concrete
346
SNI 03-4876-1998
Test method for surface smoothness of ceramic floor tiles
347
SNI 03-4877-1998
Test method for bond strength of ceramic tile to mortar
348
SNI 03-4960-1999
Construction requirements for concrete mixers, horisontal
model
349
SNI 03-6026-1999
Construction requirements for concrete brick moulding
machines
350
351
352
353
SNI 03-6027-1999
SNI 03-6196-2000
SNI 03-6197-2000
SNI 03-6247.1-2000
Palm fibre concrete roofing tiles
Procedure for energy auditing of buildings
Energy conservation of lighting system in buildings
General requirement for construction of patient elevators
354
355
SNI 03-6247.2-2000
SNI 03-6248-2000
General requirement for private residence elevators
General requirement for construction of escalators
operated by electric power
356
SNI 03-6367-2000
Specification of concrete sewer, drain pipes, and culvert
pipes
357
SNI 03-6368-2000
Specification of concrete pipes for waste water channel,
rain water channel and culvert pipes
358
SNI 03-6369-2000
Codes of practice for capping cylindrical concrete
specimens
359
SNI 03-6370-2000
Method for evaluation of stone to be used for erosion
control
360
SNI 03-6373-2000
Methods for selection and installation of vent in plumbing
system
361
362
SNI 03-6378-2000
SNI 03-6379-2000
Specification of hydrated lime for masonry purposes
Specification and methods for installation of trap seal
primer valves
363
SNI 03-6380-2000
Specification for repairing concrete with epoxy mortar
364
365
SNI 03-6384-2000
SNI 03-6385-2000
Specification of gypsum wall board
Specification of ground granulated blast-furnice slag for
use in concrete and mortars
366
SNI 03-6386-2000
Specification of sounds level and reverberation times in
buildings and houses (recommended design criteria)
367
368
SNI 03-6387-2000
SNI 03-6388-2000
Specification of quicklime for building materials
Specification for soil-aggregate subbase, base and
surface course
369
370
SNI 03-6389-2000
SNI 03-6390-2000
Energy conservation of buildings
Energy conservation of air conditioning system in
buildings
371
SNI 03-6412-2000
Test methods for cement content of freshly mixed soilcement
372
SNI 03-6415-2000
Specification for protection of openings on fire resistance
construction
373
374
SNI 03-6417-2000
SNI 03-6418-2000
Specification for soil-cement for fill dams
Specification for grout fluidifier for preplaced-aggregat
concrete
375
SNI 03-6420-2000
Specification for air handling systems in kitchen and park
area as smoke fire control in buildings
376
SNI 03-6422-2000
Specification for ground water drill-well construction for
capacity of 150 liter per minute up to 300 liter per minute
377
SNI 03-6428-2000
Test methods for abrasion resistance of concrete or
mortar surfaces by the rotating-cutter method
378
SNI 03-6429-2000
Test methods for compressive strength of concrete
cylinders cast in place in cylindrical mold
379
SNI 03-6430.1-2000
Test methods for compressive strength of grouts for
preplaced-aggregate concrete in the laboratory
380
SNI 03-6430.2-2000
Test methods for binding time of grout for preplacedaggregate concrete in the laboratory
381
SNI 03-6430.3-2000
Test methods for expansion and bleeding of freshly mixed
grout for preplaced-aggregate concrete in the laboratory
382
SNI 03-6431-2000
Test methods for flow time of fiber-reinforced concrete
through inverted slump cone
383
SNI 03-6432-2000
Test methods for length change of concrete due to alkalicarbonate rock reaction
384
SNI 03-6433-2000
Test methods for specific gravity, absorption and voids in
hardened concrete
385
SNI 03-6434-2000
Test methods for physical testing of gypsum panel and
gypsum board
386
SNI 03-6435-2000
Test methods for determining floor flatness and levelness
using the F-number system
387
SNI 03-6436-2000
Test methods for injection well and withdrawal for
determination of hydraulic propertie of aquifer system
(field procedures)
388
SNI 03-6451-2000
Test methods for tensile strength of hydraulic cement
mortars
389
390
SNI 03-6454-2000
SNI 03-6458-2000
Test methods for verticality of wells
Methods for flexural strength of soil-cement using simple
beam with third-point loading
391
SNI 03-6468-2000
Methods for planning of high-strength concrete mixture
with portland cement and fly ash
392
393
SNI 03-6469-2000
SNI 03-6477-2000
Methods for building up production wells
Methods for determination of ten percent fine value of
aggregates
394
395
SNI 03-6481-2000
SNI 03-6572-2001
Plumbing systems
Code for the design of ventilation and air-conditioning
system in buildings
396
SNI 03-6573-2001
Codes for the design of vertical transportation systems in
buildings (lifts)
397
SNI 03-6575-2001
Method for design of artificial lighting system in buildings
398
SNI 03-6652-2002
Procedures of protection design of building and
equipment against lihgtning
399
SNI 03-6759-2002
Code for energy conservation designation of buildings
400
SNI 03-6760-2002
Test method for reinforced concrete floor loading at
multistoried buildings by water load
401
SNI 03-6761-2002
Test method for single pile for static axial tensile load
402
403
SNI 03-6762-2002
SNI 03-6765-2002
Test method for piles under lateral load
Specification of bulding materials for fire prevention on
housings and buildings
404
SNI 03-6767-2002
General specification of mechanical ventilation and air
systems as fire smoke controller in buildings
405
SNI 03-6768-2002
General specification of air conditioner system as fire
smoke controller in buildings
406
SNI 03-6769-2002
Specification of central air conditioner system as fire
smoke controller in buildings
407
408
SNI 03-6771-2002
SNI 03-6791-2002
Test method for ignitability of building materials
Test method of cement content in soil-cement mixture by
chemistry analysis
409
SNI 03-6798-2002
Procedure for test specimen production and treatment for
compressive and tensile strength laboratory test of soilcement
410
411
SNI 03-6799-2002
SNI 03-6802-2002
Specification of drain pipes from clay
Manual for identification and sampling of soil and rocks for
technical purposes
412
SNI 03-6804-2002
Manual for laboratory preparation of chemical-grouted soil
test specimen for obtaining design strength parameter
413
SNI 03-6805-2002
Test methods for measuring compressive strength value
of concrete on early and projecting the strength on nextage
414
SNI 03-6806-2002
Procedure for structural non-reinforcement concrete
calculation
415
SNI 03-6807-2002
Test method of water defending capability of the grout
mixture on replaced-aggregate concrete in laboratory
416
SNI 03-6808-2002
Test method of graut fluiding on preplaced-aggregate
concrete (test method of flow funnel)
417
SNI 03-6809-2002
Code for concrete strength estimation by maturity method
418
SNI 03-6810-2002
Test methods of total solid and inorganic contents in water
for concrete mixture
419
420
SNI 03-6811-2002
SNI 03-6813-2002
Specification for spray concrete alloy
Procedure for making test cylinders and prisms for
determining strength and density of preplaced-agregate
concrete in laboratory
421
SNI 03-6814-2002
Code for implementation of mechanical connection for
concrete reinforcement
422
423
424
SNI 03-6815-2002
SNI 03-6816-2002
SNI 03-6818-2002
Code for evaluation of concrete strength test result
Procedure for detailing of concrete reinforcement
Specification of cementitious dry materials rapid
hardening in package for concrete repairs
425
SNI 03-6820-2002
Specification of fine agregate for mortar and cement floor
with cement-based materials
426
SNI 03-6821-2002
Specification of light aggregate for concrete masonry units
427
SNI 03-6823-2002
Test methods for containing portland cement mortar dry
shrinkage
428
SNI 03-6824-2002
Determination of cement content in cement aggregate by
titration
429
SNI 03-6825-2002
Test methods for mortar compressive strength of portland
cement on working civil
430
SNI 03-6826-2002
Test method for normal consitency of portland cement by
vicat apparatus for civil working
431
SNI 03-6827-2002
Test method for first binding time of portland cement using
a vicat apparatus for civil engineering
432
SNI 03-6862-2002
Specification of tools for brick and cement floor works
433
SNI 03-6863-2002
Methods of sampling and testing for fly ash or raw
pozzolan as a mineral admixture in portland cement
concrete
434
435
SNI 03-6864-2002
SNI 03-6865-2002
Specification of lime for asphalt mixture
Procedure for preparation of inter-laboratory testing
program for determining precission of construction
materials test method
436
SNI 03-6868-2002
Manual for random sampling of construction materials
437
SNI 03-6874-2002
Test method of clay dispersive characteristic by double
hydrometer
438
SNI 03-6877-2002
Test methods for uncompacted void content of fine
aggregates
439
440
441
SNI 03-6880-2002
SNI 03-6882-2002
SNI 03-6883-2002
Specification of structural concrete
Specification of mortar for masonry work
Specification of tolerances for concrete construction and
materials
442
SNI 03-6888-2002
Manual for bituminous paving mixtures plant inspection
443
444
445
446
SNI 03-6889-2002
SNI 03-6891-2002
SNI 03-6897-2002
SNI 03-6898-2002
Manual for aggregates sampling
Specification of grout for masonry work
Manual for unit price calculation of masonry work
Manual for work on taking and testing of compressive
strength of core concretes
447
SNI 03-6966-2003
Specification of hole premolding rainwater pipes for
housings
448
SNI 03-6968-2003
Specification for opened playground facilities at simple
flats
449
SNI 03-6969-2003
Test methods for measuring length of drilled concrete
cores
450
SNI 03-6981-2004
Codes of non-flat simple housing planning in urban areas
451
452
SNI 03-7011-2004
SNI 03-7012-2004
Safety in health care facility buildings
Smoke management systems in malls, atria and large
areas
453
454
SNI 03-7013-2004
SNI 03-7014.1-2004
Methods for design of simple flat facilities
Protection of structures against lightning - Part 1: General
principles
455
456
SNI 03-7015-2004
SNI 03-7017.1-2004
Lightning protection systems of structures
Electric traction lifts in buildings - Part 1: Investigation and
delivery testing
457
SNI 03-7017.2-2004
Electric traction lifts in buildings - Part 2: Periodic
investigation and testing
458
459
460
SNI 03-7065-2005
SNI 04-0225-2000
SNI 04-0226-1987
Codes of design for plumbing systems
General requirements for electrical installations
Electrical installation/apparatus, Guide for maintenance
461
SNI 04-1180-1989
Concrete plate for covering middle voltage electric cables
462
SNI 04-1925-2000
Rural electrical installations and connection of
houses/buildings
463
SNI 04-3593.4.42-1998 Electrical installations of buildings. Part 4: Protection for
saferty. Chapter 42 : Protection against thermal effects
464
SNI 04-3593.5.551-2000 Electrical installation of buildings - Part 5: Selection and
election of electrical equipment - Chapter 55: Other
equipment - Section 551: Low voltage electrical
generators
465
SNI 04-3593.6.61-2000 Electrical installation of buildings - Part 6: Verification Chapter 61: Initial verification
466
SNI 04-3593.7.704-2000 Electrical installation of buildings - Part 7: Requirements
for special installations or locations - Section 704:
Construction and demolition site installations
467
SNI 04-3593.7.709-2000 Electrical installation of buildings - Part 7: Requirements
for special installations or locations - Section 709:
Pleasure crafts and similar types quays
468
SNI 04-3593-1994
Electrical installation of buildings. Part 2 : Fundamental
principles
469
470
471
SNI 04-6193-1999
SNI 04-6921-2002
SNI 04-7018-2004
Voltage bands for electrical installations of building
Damage risks assesment due to lightning
Emergency and standby electrical power supply systems
472
SNI 04-7019-2004
Emergency electric power supply systems using stored
energy
473
474
475
SNI 05-0666-1997
SNI 05-2189-1999
SNI 05-2418-1991
General requirements for water meter housing
Definition, terms of lifts and escalator
Water meter (size 13 mm up to 40 mm), Test method
476
SNI 05-2419-1991
Water meter (size 13 mm up to 40 mm), Method for
sampling
477
478
SNI 05-2547-1991
SNI 05-3092-1992
Water meter (13 mm up to 40 mm), Specification
Dampers and valves for air distribution and diffusion,
Aerodynamic testing
479
480
SNI 05-3095-1992
SNI 05-3097-1992
Ventilation ducts, Fire resistance test
Constant and variable dual or single duct boxes and
single duct units for air distribution and diffusion,
Aerodynamic testing and rating
481
SNI 05-6040-1999
General requirements of passanger lifts construction with
traction engine
482
SNI 05-7052-2004
General requirements of construction for passenger lifts
propelled by traction motors without machine chambers
483
484
SNI 06-2459-2002
SNI 06-6803-2002
Specification rainwater absorption well for yard area
Test methods for determination of lime content in limetreated soils by titration
485
SNI 06-6867-2002
Specification for fly ash and other natural pozzolans to be
used with lime
486
487
488
489
SNI 09-1073-1989
SNI 09-1075-1989
SNI 09-1076-1989
SNI 13-4113-1996
Capacity calculation method of blade bulldozer
Dump trucks, Accessories
Dump trucks, Nomenclature and specification
Specification and test method of limestone for tin ore
concentrate melting
490
SNI 13-6668-2002
Determination of SiO2 total, Al2O3, Fe2O3, Cr2O3 and
TiO2 contents for quartz sand
491
492
SNI 13-6669-2002
SNI 13-6717-2002
Determination of clay content for sand material
Manual for preparing test speciment from aggregate
samples
493
494
495
496
SNI 15-0089-1998
SNI 15-0129-2004
SNI 15-0233-1989
SNI 15-0301-1989
Marble floor tiles
White portland cement
Cement fibre sheet, Specification and test method
Lime pozolan cement, Specification and test method
497
498
499
SNI 15-0302-2004
SNI 15-0351-1989
SNI 15-0446-1989
Pozzolanic portland cement
Sand, Specification and test method
Ceramic mozaic, solid and semi-solid type, Specification
and test method
500
501
502
503
504
505
506
507
508
509
510
SNI 15-0553-1989
SNI 15-0554-1989
SNI 15-0684-1989
SNI 15-0686-1989
SNI 15-0715-1989
SNI 15-0810-1989
SNI 15-1028-1997
SNI 15-1320-1989
SNI 15-1322-1989
SNI 15-1328-1989
SNI 15-1571-2004
Hollow red bricks, Specification and test method
Red bricks for liner, Specification and test method
Glass roof tile
Perforated red bricks
Phosphor gypsum for portland cement
Semi stable dolomite bricks with tar binding agent
Acid proof mortars, silicate types
Gypsum, Chemical analysis test method
Dolomitet lime, Colouring test method
Massive red bricks, Term of acceptance
Chamote insulation refractory bricks
511
SNI 15-1854-1990
Test method for activity of pozolan by chemical and
physical method
512
513
514
515
516
517
518
519
520
521
522
523
524
SNI 15-2049-2004
SNI 15-2094-2000
SNI 15-2530-1991
SNI 15-2531-1991
SNI 15-3044-1992
SNI 15-3500-2004
SNI 15-3758-2004
SNI 15-4357-1996
SNI 15-4422-1997
SNI 15-4754-1998
SNI 15-4760-1998
SNI 15-4764-1998
SNI 15-4765-1998
Portland cement
Massive red bricks for masonry works
Portland cement, Test method for fineness
Portland cement, Test method for specific grafity
Drilling cement
Mixed portland cement
Masonry cement
Slip glazes for roof tiles
Acid resisting bricks
Clay for clinker bricks
Clinker bricks
Ceiling bricks
Test methtod for moisture expansion of ceramic tiles
525
526
527
SNI 15-4766-1998
SNI 15-6406-2000
SNI 15-6407-2000
Concrete brick press impact tools
Sampling method for hydrated lime
Methods of sampling, inspection, packaging and marking
of lime and limestone products
528
529
530
531
532
533
SNI 15-6514-2001
SNI 15-6699-2002
SNI 15-7039-2004
SNI 15-7064-2004
SNI 19-0312-1989
SNI 19-6773-2002
Portland cement clinker
Ceramic paving brick
Zircon glaze for technical ceramics
Portland composite cement
Moulding sand, Test method
Specification for conventional system of water purification
installation unit with concrete structure
534
SNI 19-6774-2002
Procedure for installation packet unit planing of water
purification
Under Revised
535
SNI 19-6775-2002
Procedure for maintenance and operation of the 5
litre/second above water purification installation packet
Under Revised
536
SNI 19-6776-2002
Procedure for maintenance and operation of water
purification installation packet unit
537
SNI 19-6777-2002
Examination method for water purification instalation
packet unit performance of below 5 litre/second capacity
538
539
SNI 03-0090-1999
SNI 03-1072-1989
Wire gabions
Rounded graphite cast iron channel cover and inspection
hole cover
540
SNI 03-1724-1989
Hidrology and hydraulic for river's buildings, Guide for
design
541
SNI 03-1725-1989
Loading specification for highway bridges, Guide for
design
542
543
SNI 03-1731-1989
SNI 03-1732-1989
Dam, Guide for safety
Thickness of flexible hardening of highways by
component analysis method, Code of practice
544
SNI 03-1737-1989
Concrete asphalt covering for highways, Code of practice
545
546
547
548
549
SNI 03-1738-1989
SNI 03-1742-1989
SNI 03-1743-1989
SNI 03-1744-1989
SNI 03-1747-1989
Guide for testing of field CBR
Guide for light solidity of soils
Guide for testing heavy solidity of soils
Guide for testing of CBR laboratory
Bridge contruction beam type T stretch up to 25 metre, for
BM 70 load
550
SNI 03-1748-1989
Bridge construction, beam type T stretch up to 25 m, for
BM 100 load, Specification
551
552
553
554
555
556
557
SNI 03-1962-1990
SNI 03-1964-1990
SNI 03-1965.1-2000
SNI 03-1965-1990
SNI 03-1966-1990
SNI 03-1967-1990
SNI 03-1975-1990
Landslide protection, Guide for design
Test method for specific grafity of soils
Test methods for water content in soils by speedy
Test method fot water content of soils
Test method for plastic limit of soils
Test method for liquid limit of soils by Cassagrande
Method for preparation of sampling of soils and soils
contain with aggregates
558
SNI 03-1976-1990
Correction method for solidity test of soils contain with
aggregates
559
560
561
562
SNI 03-2400-1991
SNI 03-2401-1991
SNI 03-2402-1991
SNI 03-2403-1991
Code for the design of groynes in river
Code for the design of dams
Shrimps dike irrigation, Code for the design
Interlocking concrete block for pavement, Code for
installation
563
SNI 03-2411-1991
Stones and soils, Field test method for pressure water
permeability
564
SNI 03-2414-1991
River and open channel, Method for rate of flow
measurement
565
566
SNI 03-2415-1991
SNI 03-2416-1991
Method for rate of flow measurement of floods
Test method for deflection flexible hardening (of road) by
Benkelman beam apparatus
567
SNI 03-2435-1991
Laboratory test method for water permeability of soil
sample
568
SNI 03-2436-1991
Method for recording and interpretation of core drilling
569
570
571
572
SNI 03-2443-1991
SNI 03-2444-2002
SNI 03-2446-1991
SNI 03-2451-1991
Specification of sidewalks
Specification of separator opening
Side of the road guard rail, Specification
Simple bridge pillars and head, Span length 10 with pile
foundation, Specification
573
574
SNI 03-2455-1991
SNI 03-2487-1991
Soils, Triacsial laboratory A test method
Cohesive soils, Field test method for vane shear strength
575
SNI 03-2526-1991
Stream gauge station, Method of selection for location
576
SNI 03-2532-1991
Simple bridge pillars and head, Span length 11 meters
with pile foundation, Specification
577
SNI 03-2533-1991
Simple bridge pillars and head, Span length 12 meters
with pile foundation, Specification
578
SNI 03-2534-1991
Simple bridge pillars and head, Span length 13 meters
with pile foundation, Specification
579
SNI 03-2535-1991
Simple bridge pillars and head, Span length 14 meters
with pile foundation, Spesifikasi
580
SNI 03-2536-1991
Simple bridge pillars and head, Span length 15 meters
with pile foundation, Specification
581
SNI 03-2537-1991
Simple bridge pillars and head, Span length 16 meters
with pile foundation, Specification
582
SNI 03-2538-1991
Simple bridge pillars and head, Span length 17 meters
with pile foundation, Specification
583
SNI 03-2539-1991
Simple bridge pillars and head, Span length 18 meters
with pile foundation, Specification
584
SNI 03-2540-1991
Simple bridge pillars and head, Span length 19 meters
with pile foundation, Specification
585
SNI 03-2541-1991
Simple bridge pillars and head, Span length 20 meters
with pile foundation, Specification
586
SNI 03-2542-1991
Simple bridge pillars and head, Span length 21 meters
with pile foundation, Specification
587
SNI 03-2543-1991
Simple bridge pillars and head, Spin length 22 meters with
pile foundation, Specification
588
SNI 03-2544-1991
Simple bridge pillars and head, Span length 23 meters
with pile foundation, Specification
589
SNI 03-2545-1991
Simple bridge pillars and head, Span length 24 meter with
pile foundation, Specification
590
SNI 03-2546-1991
Simple bridge pillars and head, Span length 25 meters
with pile foundation, Specification
591
592
SNI 03-2812-1992
SNI 03-2813-1992
Test method for one dimension consolidation soils
Test method for direct shear of consolidated soils by
drainage
593
594
595
SNI 03-2814-1992
SNI 03-2815-1992
SNI 03-2818-1992
Test method for point load strength index of stones
Test method for B triaxial (soil test specimen)
Exploration method for ground water by Schlumbeger
geoelectric
596
597
SNI 03-2827-1992
SNI 03-2828-1992
Fiels test method by sounding apparatus
Test method for field solidity by sand conus apparatus
598
SNI 03-2829-1992
Calculation method for concrete piles on groyne at river
599
SNI 03-2830-1992
Calculation method for water level of river by margin
method based on Manning formula
600
601
602
SNI 03-2831-1992
SNI 03-2838-1992
SNI 03-2842-1992
Test method for organic content in earth by burning
Code for the design of bus bay
Code of practice for data survey of road reference point
603
SNI 03-2843-1992
Code of practice for survey of soil/gravel road condition
604
605
606
607
608
SNI 03-2844-1992
SNI 03-2849-1992
SNI 03-2850-1992
SNI 03-2851-1992
SNI 03-2852-1992
Code of practice for survey of asphalt condition
Code for engineering geological mapping
Code for the installation of utilities on the road
Code for the technical design of check dam
Code of practice for aggregate asbuton (Lasbutag)
coating
609
SNI 03-2853-1992
Code of practice for road foundation coating by crushed
stones
610
611
612
613
614
SNI 03-2925-1992
SNI 03-2926-1992
SNI 03-2927-1992
SNI 03-2928-1992
SNI 03-3046-1992
Regulator and gauge irrigation sluices
Regulator sluice-gate and cold gauges
Crump de gruyter regulator and gauge sluice-gate
Sluice on rollers
Polyvynil chloride (PVC) coated gabion and gabion wire
615
SNI 03-3404-1994
Method for installation of inclinometer
616
SNI 03-3405-1994
Test method for dispersif characteristics of soilsby pinhole
apparatus
617
SNI 03-3411-1994
Method for measurement of water level on physical
models
618
619
SNI 03-3412-1994
SNI 03-3413-1994
Calculation method for daily river discharge
Method of measurement for river peak discharge, indirect
method
620
SNI 03-3417-1994
Test method for determination of position of sounding lead
pointby theodolit
621
SNI 03-3420-1994
Soil unconsolidation, Method for direct shear without
drainage
622
623
SNI 03-3422-1994
SNI 03-3423-1994
Test method for shrinkage limit of soils
Test method for analysa of grain size of soils by
Hydrometer instrument
624
625
SNI 03-3424-1994
SNI 03-3425-1994
Code for the design of drainage of highway surfaces
Code of practice for thin coating of asphalt concrete for
highway
626
SNI 03-3426-1994
Road, Code for stringent surface flatness survey by
roughmeter Naasra
627
SNI 03-3428-1994
Fly bridges for pedestrian, Code For the technical design
628
629
SNI 03-3429-1994
SNI 03-3431-1994
Fly bridges for pedestrian, Code of practice
Code for controlling horizontal displacement of rocks and
building using inclinometer
630
SNI 03-3432-1994
Code for design flood and over topping capacity
determination of dams
631
SNI 03-3437-1994
Code for design of soil stabilization by limestone for
roads
632
SNI 03-3438-1994
Code for soil stabilization by portland cement for roads
633
SNI 03-3439-1994
Code of practice for soil stabilization by limestone for
roads
634
SNI 03-3440-1994
Code of practice for soil stabilization by portland cement
for roads
635
SNI 03-3441-1994
Code for the design of river bank protection stone system.
636
SNI 03-3442-1993
Code for piezometer installation of open stand pipe tubing
casagrande
637
SNI 03-3443-1994
Code for controlling of pore water pressure of open
stand pipe tubing casagrande by piezometer
638
SNI 03-3444-1994
Code for calculation of water level of devided channels
river by marginla
639
SNI 03-3446-1994
Code for the technical design of direct foundation of
bridges
640
SNI 03-3447-1994
Code for the technical design of well shape foundation of
bridges
641
SNI 03-3448-1994
Code for the joint of sided section precast concrete poles
monolith system epoxy material
642
643
SNI 03-3452-1994
SNI 03-3453-1994
Pneumatic pisometer, Code for installation
Code for monitoring pore water pressure using pneumatic
pisometer
644
SNI 03-3454-1994
Code for installation of magnetic settlement gauge for
measuring vertical earth displacement
645
SNI 03-3455-1994
Code for monitoring vertical earth displacement using
magnetic instruments
646
SNI 03-3637-1994
Test method for unit weight of fine soil by test specimen
moulding equipment
647
SNI 03-3638-1994
Unconfined compressive strength test method for
cohesive soil
648
649
SNI 03-3760-1995
SNI 03-3965-1995
Expanded metal gabion
Method for making physical models of rivers with fixed
bed
650
SNI 03-3966-1995
Test method for compressive stiffness and shear stiffness
of bridge rubber bearings
651
SNI 03-3967-2002
Specification for plain and laminated elastomeric bridge
hearings
652
SNI 03-3968-1995
Measurements method for water permeability on
unsaturated zones earth by Auger holes
653
SNI 03-3969-1995
Ground water drilling method by direct circulation system
twist drill
654
SNI 03-3970-1995
Measurement method for free ground water surface level
in well
655
656
SNI 03-3977-1995
SNI 03-3978-1995
Code for making slope angle map by Horton formula
Code of practice for cold mixing asphalt concrete with
emulsion asphalt for road hardening
657
SNI 03-3979-1995
Code of practice for one layer asphalt resurfacing for road
surfaces
658
SNI 03-3980-1995
Code of practice for two layer asphalt resurfacing for road
surfaces
659
SNI 03-4143-1996
Test method for soil linear shrinkage
660
661
662
SNI 03-4144-1996
SNI 03-4148.1-2000
SNI 03-4153-1996
Test method for soil shrinkage volume
Sampling methods of soils by thin walled tube
Test method for penetration by standard penetration test
(SPT)
663
664
SNI 03-4361-1996
SNI 03-4427-1997
Paving slab
Test method of hardness surface frictional properties
using pendulum tester
665
SNI 03-4434-1997
Specification of prestressed concrete piles for bridge
foundation, sizes (30 x 30, 35 x 35, 40 x 40) cm2, length
10-20 cm with reinforced steel BJ 24 and BJ 40.
666
667
SNI 03-4801-1998
SNI 03-4813-1998
Test methods for rubber bearing for bridges
Triaxial test method for unconsolidated and undrained
cohesive soils
668
669
SNI 03-4816-1998
SNI 03-6374-2000
Specification of rubber bearing for bridges
Methods for installation and monitoring of pneumatic total
pressure cell
670
671
672
SNI 03-6376-2000
SNI 03-6377-2000
SNI 03-6381-2000
Methods for making test pit manually
Methods for cleaning wells
Specification for Cipoletti discharge measuring
instruments
673
SNI 03-6413-2000
Test methods for density and net weight of soil in site by
rubber baloon
674
SNI 03-6416.1-2000
Specification for joint materials of concrete dams - Part 1:
Selection of waterstop materials
675
SNI 03-6416.2-2000
Specification for joint materials of concrete dams - Part 2:
Installation of waterstop for joints
676
SNI 03-6423-2000
Test methods for choke potential of soil-geotextile system
by gradient ratio
677
SNI 03-6424-2000
Test methods for one dimension of swell or settlement
potential of cohesive soils
678
679
SNI 03-6425-2000
SNI 03-6426-2000
Test methods for expansion index of soils
Test method for measurement of the pH of a soil-cement
paste for stabilization
680
SNI 03-6427-2000
Test methods for wetting and drying test of compacted
soil-cement mixtures
681
SNI 03-6453-2000
Test methods for water permeability of foundation soil
layer by pumping up in site
682
SNI 03-6455.1-2000
Methods for measurement of discharge in open channels
by Parshall flum and SANIIRI flum measuring structures
683
SNI 03-6455.2-2000
Methods for measurement of discharge in open channels
by flat-V weir measuring structures
684
SNI 03-6455.3-2000
Methods for measurement of discharge in open channels
by quadrangular broad weir measuring structures
685
SNI 03-6455.4-2000
Methods for measurement of discharge in open channels
by triangular weirs
686
SNI 03-6455.5-2000
Methods measurement of discharge in open channels by
rectangular weirs
687
SNI 03-6456.1-2000
Methods for river control during dam construction
operations - Part 1: River control during dam construction
operations
688
SNI 03-6456.2-2000
Methods for river control during dam construction
operations - Part 2: Closure of river and construction of
diversion dams
689
SNI 03-6460.1-2000
Method for safety in tunneling of civil construction - Part 1:
Planning and organization
690
SNI 03-6460.2-2000
Method for safety in tunneling of civil construction. Part 2:
Emergency danger and working environment
691
SNI 03-6460.3-2000
Methods for safety in tunneling of civil construction - Part
3: Communication, noise and transportation
692
693
SNI 03-6465-2000
SNI 03-6467.1-2000
Methods for quality control of embankment dams
Methods for measurement of fluid flow in open channel by
round - nose horizontal broad - crested weir measuring
structures
694
SNI 03-6467.2-2000
Methods for measurement of water flow in open channel
indirectly by slope - area methods
695
SNI 03-6473-2000
Test methods for by falling head permeability (of soils)
696
SNI 03-6474-2000
Test methods for determination of unconfined
compressive strength index of chemical grouted soils
697
SNI 03-6475-2000
Test methods for pile foundation under static axial tensile
load
698
SNI 03-6720.1-2002
Geotextile - Part 1: Methods of installing geotextile as a
filter and transition in fiilled dams
699
SNI 03-6720.2-2002
Goetextiles - Part 2: Manual of geotextile permeability and
hole diameter as filter and transition in filled dams
700
SNI 03-6720.3-2002
Geotextile - Part 3: Method of designing geotextile as a
filter and transition in fill dams
701
SNI 03-6747-2002
Manual for pile foundation technical design for bridges
702
703
SNI 03-6748-2002
SNI 03-6749-2002
Test methods of road surface skit by MU-meter
Specification of sand asphalt thin layer materials (latasir)
704
SNI 03-6750-2002
Specification of resurfacing one layer asphalt (burtu) and
two layers asphalts (burda)
705
SNI 03-6751-2002
Specification of makadam penetration layer materials
(lapen)
706
SNI 03-6752-2002
Test method of water and light fraction content in
asphalted hardening mixture
707
SNI 03-6753-2002
Test methods of water efect on compressive strength of
compacted-asphalt mixture
708
SNI 03-6754-2002
Test method of air cavity in bituminous paving of
compacted dense and open graded
709
SNI 03-6755-2002
Test methods for bulk specific gravity of compact asphalt
mixture using parafin layer test specimens
710
SNI 03-6756-2002
Test method for determination of asphalted hardening
density level
711
SNI 03-6757-2002
Test method for bulk specific gravity of compact asphalt
mixture using saturated surface dry test specimens
712
SNI 03-6758-2002
Test method for compressive strength of asphalt mixture
713
714
715
SNI 03-6792-2002
SNI 03-6795-2002
SNI 03-6796-2002
Test method of soil density in field by sleeve
Test method of expansive soil determination
Test method for determination of soil beraing power by
static load at shallow foundation
716
SNI 03-6797-2002
Manual for classification of soil and aggregate soil mixture
for road construction
717
SNI 03-6819-2002
Specification of fine aggregates for asphalted hardening
mixtures
718
SNI 03-6822-2002
Test methods of sieve for aggregate of extraction yield
719
SNI 03-6828-2002
Test methods of emulsion asphalt sedimentation
720
SNI 03-6829-2002
Test method of emulsion asphalt residue content by
evaporation
721
SNI 03-6830-2002
Test methods for damage of emulsion asphalt and cement
mixtures
722
SNI 03-6831-2002
Test method of adhering emulsion asphalt M-50
aggregate
723
724
SNI 03-6832-2002
SNI 03-6833-2002
Specification of emulsion asphalt
Test methods of inorganic materials or ash contents in
asphalt
725
726
SNI 03-6834-2002
SNI 03-6835-2002
Test method of asphalt consistency by floating
Tes method of effect of heat and air on a moving film of
asphal (rolling thin film oven test)
727
SNI 03-6836-2002
Test method of resilient modulus for asphalt mixture by
indirect tensile
728
SNI 03-6837-2002
Procedure for accelerated aging of asphalt binder using a
pressurized aging vessels
729
SNI 03-6838-2002
Manual for test specimen preparation - compaction of
asphalt mixture sample using a gyratory compactor
730
SNI 03-6884-2002
Test methods for sieve analysis of filler material for road
hardening
731
732
SNI 03-6885-2002
SNI 03-6886-2002
Methods of spot test of oil asphalt
Test methods or moisture and density relations of soilcement
733
SNI 03-6887-2002
Test methods for unconfined compressive strength of
cement-soil mixture
734
SNI 03-6894-2002
Test method for asphalt content from asphalt mixtures by
centrifuge
735
SNI 03-6895-2002
Manual for recovery of asphalt from solution by abson
method
736
SNI 03-6967-2003
General requirements of network and geometric systems
of housing streets
737
SNI 03-7040-2004
The placement criteria of very high frequency
omnidirectional range (VOR) signal transmitter
738
SNI 03-7041-2004
The placement criteria of non directional beacons (NDB)
739
SNI 03-7043-2004
Methods of hydraulic design for permanent dam
construction with energy absorber type MDL
740
741
SNI 03-7046-2004
SNI 03-7047-2004
Airport passanger terminals
Airport cargo terminals
742
SNI 03-7048-2004
The placement criteria of very high frequency air-ground
communication facilities (VHF-A/G)
743
744
SNI 03-7049-2004
SNI 03-7050-2004
The design of facilities for special user in airports
The placement criteria of distance measuring equipment
(DME)
745
746
SNI 03-7051-2004
SNI 03-7067-2005
The sign and obstacle light installation in airports
Codes of flight accident rescue and fire fighting in airports
747
748
SNI 03-7094-2005
SNI 03-7095-2005
The signs of airport terminals
The marking and signs on movement areas in airports
749
750
751
SNI 03-7112-2005
SNI 04-2763-1992
SNI 04-6262-2000
Safety areas of flight operation
Traffic light
Recommendation for road lighting for motor vehicles and
pedestrian
752
SNI 04-7097-2005
Very high frequency air-ground telecommunication
equipment in airports
753
SNI 05-6461-2000
Method for installation and monitoring of vibrating wire
piezometer
754
755
756
SNI 06-3045-1992
SNI 06-6399-2000
SNI 06-6400-2000
Rubber bearing for bridge
Sampling method for asphalt
Methods for determination of asphalt volume correction to
volume at standard temperature
757
SNI 06-6721-2002
Viscocity test methods for liquid asphlat and emulsified
asphlat by saybolt devices
758
SNI 06-6722-2002
Test method for flash point of liquid asphalt by tag open
cup apparatus
759
SNI 06-6723-2002
Specification of mineral filler for bituminous paving
mixtures
760
761
SNI 06-6890-2002
SNI 06-6893-2002
Manual for sampling bituminous paving methods
Test methods of maximum specicific gravity of bituminous
paving mixtures
762
SNI 10-4836-1998
Character of signal light rhythm for marine navigation
763
764
765
766
767
SNI 10-4838-1998
SNI 13-6607-2001
SNI 15-4839-1998
SNI 19-0140-1987
SNI 19-6410-2000
Requirements for passanger terminals in harbour
Report writing of ground water drilling technique
Specification for glass beads used in traffic paint
Method of measurement of water dischange
Methods for piling up soils for absorption area on private
sewage disposal treatment
768
769
SNI 19-6459-2000
SNI 19-6471.1-2000
Methods for controlling sedimentation of reservoirs
Method for dredging of river mouth and coast - Part 1 :
Location survey and investment
770
SNI 19-6471.2-2000
Methods for dredging of river mouth and coast - Part 2 :
Considerations which influence works
771
SNI 19-6471.3-2000
Method for dredging of river mouth and coast - Part 3 :
Selection of equipment
772
SNI 19-6471.4-2000
Dredging methods of river mouth and coast - Part 4 :
Operation and monitoring
773
774
SNI 03-0093-1987
SNI 03-0418-1989
Lock-plate, Specification and test method
Door locks for simple housing, Specification and test
method
775
776
777
SNI 03-0419-1989
SNI 03-1973-1990
SNI 03-1974-1990
Padlocks, Specification
Test method for unit weight of concrete
Test method for compressive strength of concrete
Member Country
: Lao PDR
Date of Submission
: 08 August 2011
Submitted by
: Division of Standard and Quality (DSQ)
Dept of Intellectual property, Standardization and Metrology (DISM)
E-mail address:
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 1 - National Standards for Construction Materials
National Standards (NS)
No :
Year
(Construction Materials)
Title of NS
LS 02- 2000
Standard for steel round Bars
LS 03- 2000
Standard for steel deformed bars
LS 04- 2001
Standard for Portland cement
LS 05- 2001
standard for mixed cement
LS 08- 2004
standard for Zinc sheets for roofing
LS 09- 2004
standard for clay building Bricks
LS 10- 2004
Standard for Wire nails For wood
Remarks
Had been revised to LS 04-2010
LS 62-2006
Concrete Roofing Tiles
LS 63-2006
Packaged Driking Water
LS 65-2007
Standard for Fibre Cement Profile Sheets
LS 71- 2009
Standard for Unplasticized Poly Vinyl Chloride pipes for water
LS 74 - 2010
Standard for concret flooring tiles
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative Requirements
(AR) – Reference No.
Department of Housing and
Urban Planning, Ministry of
Public Works and Transport
Department of Housing and
Urban Planning, Ministry of
Public Works and Transport
Department of Housing and
Urban Planning, Ministry of
Public Works and Transport
Department of Housing and
Urban Planning, Ministry of
Public Works and Transport
Brief Description / or Title of TR / AR
Remarks
(State TR or AR)
Construction Law-Dec 2009, (Lao version)
(Define to rule, regulation, inspect control and ect. which concern on
building system and quality of construction materials)
Regulation-Sep 1991 (Building Permit, Lao version)
(Define to procedure of technical drawing , specification and surrounding
area where will construct building before construction)
Urban Planning Law-April 1999(English and Lao)
(Define to allocate urban plan of infrastructure system which include
building control system)
Building Code (draft Lao version)
(Building inspection, safety)
(On going)
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulations
Item
1
2
3
Name
Position
Department
Mrs. Nisiith
KHAMMOUNHEUANG
Deputy Director of
Standard and Quality
Division
Department of
Intellectual
property,
Standardization and
Metrology
Mr. Viengvisa SIVIXAY
Mr Sengsavath
SIDLAKONE
Chef of Technical
State Enterprise for
Survey Design and
Materials Testing
Technical Officer
Department of
Housing and Urban
Planning
Address
Tel
Fax
E-mail
856-21-243405
856-21-23405
Khammounheuang.nast@g
mail.com
856-21-415258
856-21-415259
sdmt@laotel.com
Tel: 856-21412275, 412283
856-21-412282
vathslk@yahoo.co.uk
Nahaidiew Road
PO box: 2279
Vientiane, Lao PDR
LaneXang Avenue,
Chathabouly District
Vientiane, Lao PDR
Member Country : MALAYSIA
Date of Submission : 20 February 2009
Submitted by : HUSSALMIZZAR HUSSAIN
E-mail address : mizzar@standardsmalaysia.gov.my
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 1 - National Standards for Construction Materials
No
National Standards
(NS)
No :
Year
(Construction
Materials)
1
MS 282 : Part 1 - Part 9
: 1975
2
3
4
MS 1525 : 2001
MS 1313 : 1993
MS 1294 : Part 1 : 1992
5
MS 1294 : Part 2 : 1993
6
7
8
9
10
MS 1294 : Part 3 : 1993
MS 1294 : Part 4 : 1995
MS 408 : 1976
MS 770 : 1982
MS 797 : Part 1 and
Part 2 : 1982
MS 972 : 1998
MS 1552 : Part 1 : 2002
11
12
Title of NS
Code of practice for building operating code :
Part 1 : Demolition : Part 2 : Excavation work : Part 3 : Welding and cutting : Part 4 : Piling : Part 5 : Handling and
storing materials : Part 6 : Blasting : Part 7 : Scaffolds : Part 8 : Ladders : Part 9 : Temporary floors, stairs, railings
and toe boards.
Code of practice on energy efficiency and use of renewable for non-residential buildings
Code of practice on large prefabricated panels
Specification for wall and floor tiling : Part 1 : Code of practice for the design and installation of internal ceramic
wall tiling and mosaics in normal conditions
Wall and floor tiling : Part 2 : Code of practice for the design and installation of external ceramic wall tiling and
mosaics (including terra cotta and faience slabs
Wall and floor tiling : Part 3 : Code of practice for the design and installation of ceramic floor tiles and mosaics
Wall and floor tiling : Part 4 : Code of practice for tiling and mosaics in specific conditions
Code of practice for laying of resilient tile and sheet flooring
Specification for ceiling roses
Part 1 : Specification for concrete interlocking roofing tiles : Part 2 : Code of recommended practice for the
installation of concrete interlocking roofing tiles
Specification for solid rubber flooring (First revision).
Specification for raised access floor systems : Part 1 : General requirements
1
Remarks
No
National Standards
(NS)
No :
Year
(Construction
Materials)
13
14
15
16
17
MS 1552 : Part 2 : 2002
MS 832 : 1984
MS 1017 : Part 1 : 1986
MS 1057 : 1995
MS 1073 : Part 2 : 1996
18
19
20
21
22
23
24
25
26
MS 1073 : Part 3 : 1996
MS 1506 : 2000
MS 1508 : 2000
MS 416 : 1976
MS 229 : 1988
MS 544 : Part 1: 2001
MS 544 : Part 2 : 2001
MS 544 : Part 3 : 2001
MS 544 : Part 4 :
Section 1 : 2001
MS 544 : Part 4 :
Section 2 : 2001
MS 544 : Part 4 :
Section 3 : 2001
MS 544 : Part 4 :
Section 4 : 2001
MS 544 : Part 5 : 2001
MS 544 : Part 6 : 2001
MS 544 : Part 7 : 2001
MS 544 : Part 9 :
Section 1 : 2001
MS 544 : Part 11 :
Section 1 : 2001
MS 544 : Part 11 :
Section 2 : 2001
MS 544 : Part 11 :
Section 3 : 2001
MS 794 : 1982
27
28
29
30
31
32
33
34
35
36
37
Title of NS
Specification for raised access floor system : Part 2 : Test methods
Specification for aluminium alloy windows
Specification for aluminium framed sliding glass doors : Part 1 : Single glazed door
Specification for adjustable louvre windows (First revision
Specification for fire resistance doorsets : Part 2 : Methods for determination of fire resistance - General
principles
Specification for fire resistance doorsets : Part 3 : Methods for determination of fire resistance - Type of doorsets
Specification for wooden door
Specification for wooden door frame
Code of practice for the use of structural steel in building
Nomenclature and users of commercial timbers of Malaysia (First revision
Code of practice for structural use of timber : Part 1 : General (First revision)
Code of practice for structural use of timber : Part 2 : Permissible stress design of solid timber (First revision)
Code of practice for structural use of timber : Part 3 : Permissible stress design of glued laminated timber
Code of practice for the structural use of timber : Part 4 : Timber panel products : Section 1 : Structural Plywood
Code of practice for structural use of timber : Part 4 : Timber panel products : Section 2 : Marine plywood
Code of practice for structural use of timber : Part 4 : Timber panel products : Section 3 : Cement bonded particle
board (CBP)
Code of practice for structural use of timber : Part 4 : Timber panel products : Section 4 : Oriented strand board
(OSB)
Code of practice for the structural use timber : Part 5 : Timber joints
Code of practice for structural use of timber : Part 6 : Workmanship, inspection and maintenance (First revision)
Code of practice for the structural use of timber : Part 7 : Testing (First revision)
Code of practice for structural use of timber : Part 9 : Fire resistance of timber structures : Section 1 : Method of
calculating fire resistance of timber members
Code of practice for structural use of timber : Part 11 : Recommended span tables and their calculations : Section
1 : Domestic floor joists
Code of practice for structural use of timber : Part 11 : Recommended span tables and their calculations : Section
2 : Ceiling joists
Code of practice for structural use of timber : Part 11 : Recommended span tables and their calculations : Section
3 : Ceiling binders
Specification for masonry cement.
2
Remarks
No
National Standards
(NS)
No :
Year
(Construction
Materials)
38
MS 922 : Part 1 : 1984
39
40
41
MS 1195 : Part 1 : 1991
MS 1195 : Part 2 : 1991
MS 1195 : Part 3 : 1991
42
MS 1226 : Part 1 : 1991
43
44
45
46
MS 1242 : 1991
MS 1293 : Part 1 : 1992
MS 1314 : Part 1 : 1993
MS 415 : Part 1 : 1976
47
48
MS 1490 : 2001
MS 1491 : 2001
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
MS 522 : Part 1 : 1989
MS 522 : Part 2 : 1989
MS 522 : Part 3 : 1989
MS 522 : Part 4 : 1989
MS 524 : 1984
MS 623 : 1981
MS 888 : 1991
MS 975 : 1985
MS 1037 : 1986
MS 1045 : 1986
MS 1087 : 1987
MS 1224 : 1991
MS 1227 : 1991
MS 1296 : 1992
MS 1387 : 1995
MS 1388 : 1995
MS 1389 : 1995
MS 1520 : 2001
Title of NS
Specification for concrete admixtures : Part 1 : Accelerating admixtures, retarding admixtures and water-reducing
admixtures.
Code of practice for structural use of concrete : Part 1 : Design and construction.
Code of practice for structural use of concrete: Part 2 : Special circumstances
Code of practice for structural use of concrete : Part 3 : Design charts for singly reinforced beams, doubly
reinforced beams and rectangular columns
Pulverized-fuel ash : Part 1 : Specification for pulverized-fuel ash for use as a cementitious component in
structural concrete
Guide to assessment of concrete strength in existing structures.
Specification for precast reinforced concrete box culverts : Part 1 : Small culverts.
Specification for precast concrete piles : Part 1 : Standard design precast concrete piles
Code of practice for composite construction in structural steel and concrete : Part 1: Simply supported beams in
buildings.
Specification for hot rolled non-alloy structural steel sections and H-piles
Specification for dimensions, mass and tolerances of hot rolled non-alloy structural steel sections and H-piles
(First revision)
Specification for Portland cement (ordinary and rapid-hardening): Part 1 : Standard specification (First revision).
Specification for Portland cement (ordinary and rapid-hardening): Part 2 : Physical tests (First revision).
Specification for Portland cement (ordinary and rapid-hardening) Part 3 : Chemical analysis (First revision
Specification for portland cement (ordinary and rapid-hardening): Part 4: Spectrophotometric analysis of cement.
Specification for asbestos cement symmetrically corrugated sheets (First revision).
Specification for semi-compressed asbestos cement flat sheets
Specification for white portland cement (First revision).
Specification for processing additions for use in the manufacture of hydraulic cements
Specification for sulphate-resisting portland cement.
Methods of measuring drying shrinkage of mortar containing hydraulic cement.
Code of practice for laying and field-pressure testing of asbestos-cement pipelines.
Specification for fibre cement symmetrically corrugated sheet and fittings.
Specification for Portland pulverized-fuel ash cement.
Specification for fibre-cement flat sheets.
Specification for ground granulated blastfurnace slag for use with portland cement.
Specification for high slag blastfurnace cement.
Specification for portland blastfurnace cement.
Specification for pozzolanic pulverized-fuel ash cement
3
Remarks
No
National Standards
(NS)
No :
Year
(Construction
Materials)
67
68
69
70
71
72
73
74
MS 76 : 1972
MS 701 : 1981
MS 738 : 1981
MS 756 : 1981
MS 847 : 1983
MS ISO 10545-1 : 2002
MS ISO 10545-2 : 2002
MS ISO 10545-3 : 2001
75
76
77
78
79
80
MS ISO 10545-5 : 2002
MS ISO 10545-6 : 2001
MS ISO 10545-7 : 2001
MS ISO 10545-8 : 2001
MS ISO 10545-9 : 2001
MS ISO 10545-10 :
2002
MS ISO 10545-11 :
2001
MS ISO 10545-12 :
2001
MS ISO 10545-13 :
2001
MS ISO 10545-14 :
2001
MS ISO 10545-15 :
2002
MS ISO 10545-16 :
2002
MS 858 : 1983
MS 1088 : 1987
MS 1089 : 1987
MS 1091 : Part 3 : 1987
MS 1091 : Part 4 : 1987
MS 1091 : Part 8 : 1987
81
82
83
84
85
86
87
88
89
90
91
92
Title of NS
Specifications for bricks and blocks of fired brick-earth clay or shale : Part 2 : Metric units.
Specification for commercial sand.
Specification for terrazo floor tiles.
Specification for china clay
Specification for silica sand for the manufacture of sodium silicate.
Ceramic tiles - Part 1 : Sampling and basis for acceptance
Ceramic tiles - Part 2 : Determination of dimensions and surface quality
Ceramic tiles - Part 3 : Determination of water absorption, apparent porosity, apparent relative density and bulk
density
Ceramic tiles - Part 5 : Determination of impact resistance by measurement of coefficient of restitution
Ceramic tiles - Part 6 : Determination of resistance to deep abrasion for unglazed tiles
Ceramic tiles - Part 7 : Determination of resistance to surface abrasion for glazed tiles
Ceramic tiles - Part 8 : Determination of linear thermal expansion
Ceramic tiles - Part 9 : Determination of resistance to thermal shock
Ceramic tiles - Part 10 : Determination of moisture expansion
Ceramic tiles - Part 11 : Determination of crazing resistance for glazed tiles
Ceramic tiles - Part 12 : Determination of frost resistance
Ceramic tiles - Part 13 : Determination of chemical resistance
Ceramic tiles - Part 14 : Determination of resistance to stains
Ceramic tiles - Part 15 : Determination of lead and cadmium given off by glazed tiles
Ceramic tiles - Part 16 : Determination of small colour differences
Specification for glazed ceramic tiles for internal walls.
Specification for dust pressed ceramic floor tiles.
Specification for extruded ceramic floor tiles
Methods of test for ceramic tiles : Part 3 : Determination of modulus of rupture
Methods of test for ceramic tiles : Part 4 : Determination of scratch hardness of surface according to MOHS.
Methods of test for ceramic tiles : Part 8 : Determination of chemical resistance of unglazed tiles.
4
Remarks
No
National Standards
(NS)
No :
Year
(Construction
Materials)
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
MS 1380 : 1995
MS 26 : Part 1 : 1991
MS 26 : Part 2 : 1991
MS 26 : Part 3 : 1992
MS 27 : 1996
MS 28 : 1985
MS 29 : 1995
MS 30 : Part 1 : 1995
MS 30 : Part 2 : 1995
MS 30 : Part 3 : 1995
MS 30 : Part 4 : 1995
MS 30 : Part 5 : 1995
MS 30 : Part 6 : 1995
MS 30 : Part 7 : 1995
MS 30 : Part 8 : 1995
MS 30 : Part 9 : 1995
MS 30 : Part 10 : 1995
MS 30 : Part 11 : 1995
111
112
113
114
115
MS 30 : Part 12 : 1995
MS 30 : Part 13 : 1995
MS 30 : Part 14 : 1995
MS 30 : Part 15 : 1995
MS 30 : Part 16 : 1995
116
117
118
MS 30 : Part 17 : 1995
MS 523 : Part 1 : 1993
MS 523 : Part 2 : 1993
119
MS 523 : Part 3 : 1993
120
MS 523 : Part 4 : 1993
121
MS 525 : 1986
Title of NS
Specification for precast paving blocks.
Methods of testing concrete : Part 1 : Methods of sampling fresh concrete (First revision).
Methods of testing concrete : Part 2 : Methods of testing hardened concrete (First revision).
Methods of testing concrete : Part 3 : Recommendations for use of non-destructive testing of concrete.
Specification for precast concrete masonry units (First revision).
Specification for tests for water for making concrete (First revision)
Specification for aggregates from natural sources for concrete (First revision).
Method of testing aggregates : Part 1 : General requirements for apparatus and calibration.
Methods of testing aggregates : Part 2 : Guide to sampling and testing aggregates.
Methods of testing aggregates : Part 3 : Methods for sampling.
Methods of testing aggregates : Part 4 : Methods for determination of particle size distribution
Methods of testing aggregates : Part 5 : Methods for determination of particle shape (First revision).
Methods of testing aggregates : Part 6 : Method for determination of shell content in coarse aggregate.
Methods of testing aggregates : Part 7 : Methods for determination of moisture content (First revision).
Methods of testing aggregates : Part 8 : Methods for determination of aggregates crushing value (ACV)
Method of testing aggregates : Part 9 : Methods for determination of ten per cent fines value (TFV).
Method of testing aggregates : Part 10 : Methods for determination of aggregate impact value (AIV).
Methods of testing aggregates : Part 11: Methods for determination of resistance to degradation of coarse
aggregates by abrasion and impact in the Los Angeles machine (First revision).
Methods of testing aggregates : Part 12 : Methods for determination of polished-stone value (First revision).
Methods of testing aggregates : Part 13 : Methods for determination of water soluble chloride salts.
Methods of testing aggregates : Part 14 : Methods for determination of sulphate content.
Methods of testing aggregates : Part 15 : Methods for determination of acid-soluble material in fine aggregates.
Method of testing aggregates : Part 16 : Method for testing and classifying drying shrinkage of aggregates in
concrete.
Method of testing aggregates : Part 17 : Method for determination of soundness.
Specification for concrete, including ready-mixed concrete : Part 1 : Guide to specifying concrete
Specification for concrete, including ready-mixed concrete : Part 2 : Methods for specifying concrete mixes (First
revision).
Specification for concrete, including ready-mixed concrete : Part 3 : Procedures to be used in producing and
transporting concrete (First revision).
Specification for concrete, including ready-mixed concrete : Part 4 : Procedures to be used in sampling, testing
and assessing compliance of concrete (First revision).
Specification for concrete porous pipes for under drainage (First revision).
5
Remarks
No
122
National Standards
(NS)
No :
Year
(Construction
Materials)
Title of NS
123
MS 797 : Part 1 and
Part 2 : 1982
MS 881 : Part 2 : 1991
124
MS 881 : Part 3 : 1991
125
126
127
128
129
MS 1293 : Part 1 : 1992
MS 1314 : Part 1 : 1993
MS 1314 : Part 2 : 1996
MS 972 : 1998
MS 1058: Part 1:2005
130
131
132
134
135
MS 1058: Part 2:2005
MS 1058: Part 3:2006
MS 1058: Part 4:2006
MS 1058: Part 5:2006
MS 1419: Part 1:2007
136
MS 1419: Part 2:
Section 1:2007
Polyethylene (PE) piping systems for water supply: Part 2 : Pipes (Fourth revision)
Polyethylene (PE) piping systems for water supply – Part 3: Fittings
Polyethylene (PE) piping systems for water supply – Specification: Part 4: Fitness for purpose of the system
Polyethylene (PE) piping systems for water supply – Part 5: Guidance for the assessment of conformity
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications – Part 1: Specification for
compounds, pipes and fittings (First revision)
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
1: Method for determining the dimensions of pipes and fittings
137
MS 1419: Part 2:
Section 2:2007
MS 1419: Part 2:
Section 3:2007
MS 1419: Part 2:
Section 4:2007
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
2: Method for hydrostatic pressure testing of pipes
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
3: Method for determining the impact characteristics of pipes
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
4: Method for determining reversion of plastics pipes
MS 1419: Part 2:
Section 5:2007
MS 1419: Part 2:
Section 6:2007
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
5: Method for high temperature testing of pipe
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
6: Method of determining the suitability of connection threads of BSP form
138
139
140
141
Part 1 : Specification for concrete interlocking roofing tiles.
Part 2 : Code of recommended practice for the installation of concrete interlocking roofing tiles.
Specification for precast concrete pipes and fittings for drainage and sewerage : Part 2: Specification for
inspection chambers and street gullies.
Specification for precast concrete pipes and fittings for drainage and sewerage : Part 3 : Specification for pipes
and fittings with ogee joints.
Specification for precast reinforced concrete box culverts : Part 1 : Small culverts.
Specification for precast concrete piles : Part 1 : Standard design precast concrete piles.
Specification for precast concrete piles : Part 2 : Special design small precast concrete piles.
Specification for solid rubber flooring ( First revision).
Polyethylene (PE) piping systems for water supply: Part 1:General (Fourth revision)
6
Remarks
No
142
National Standards
(NS)
No :
Year
(Construction
Materials)
144
MS 1419: Part 2:
Section 7:2007
MS 1419: Part 2:
Section 8:2007
MS 1419: Part 3:1997
145
MS 1419: Part 4:1998
146
MS 1583: Part 1 2003
147
153
MS 1583: Part 2:
Section 1:2003
MS 1583: Part 2:
Section 2:2003
MS 1583: Part 2:
Section 3: 2003
MS 1583: Part 2:
Section 4: 2003
MS 1583: Part 2:
Section 5:2003
MS 1583: Part 2:
Section 6: 2003
MS 1583: Part 3:2003
154
155
156
MS 1736: Part 1:2004
MS 1736: Part 2:2004
MS 1736: Part 7:2004
157
158
MS 1736: Part 3:2004
MS 1736: Part 5:2004
159
MS 1736: Part 7:2004
143
148
149
150
151
152
Title of NS
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
7:Method for hydrostatic pressure testing of fitting
Acrylonitrile-butadiene-styrene (ABS) piping systems for pressure applications: Part 2: Methods of test: Section
8: Method for high temperature stress-relief testing of fittings
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications: Part 3: Solvent
cement and priming (cleaning) fluids for use with ABS pipes and fittings
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications: Part 4:
Installation of ABS pipe systems
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 1: Specification
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 2: Methods of test: Section 1: Samples
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 2: Methods of test: Section 2: Odour and flavour of water
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 2: Methods of test: Section 3: Appearance of water
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 2: Methods of test: Section 4: Growth of aquatic micro-organisms test
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 2: Methods of test: Section 5: The extraction of inorganic constituents
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 2: Methods of test: Section 6: The extraction of inorganic constituents
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to
their effect on the quality of the water: Part 3: High temperature test
Plastics piping systems for hot and cold water installations – Crosslinked Polyethylene (PE-X) – Part 1: General
Plastics piping systems for hot and cold water installations – Crosslinked Polyethylene (PE-X) – Part 2: Pipes
Plastics piping systems for hot and cold water installations – Crosslinked Polyethylene (PE-X) – Part 7:
Guidance for the assessment of conformity
Plastics piping systems for hot and cold water installations – Crosslinked Polyethylene (PE-X) – Part 3: Fittings
Plastics piping systems for hot and cold water installations – Crosslinked Polyethylene (PE-X) – Part 5: Fitness
for purpose of the system
Plastics piping systems for hot and cold water installations – Crosslinked Polyethylene (PE-X) – Part 7:
Guidance for the assessment of conformity
7
Remarks
No
National Standards
(NS)
No :
Year
(Construction
Materials)
160
MS 1737:2004
161
MS 1738:2004
162
MS 1739:2004
163
MS 1740:2004
164
MS 1741:2004
165
166
167
169
170
171
172
173
174
MS 1761:2004
MS 628: Part 1: 1999
MS 628: Part 2: Section
2.1:1999
MS 628: Part 2: Section
2.2:1999
MS 628: Part 3: 1999
MS ISO 10508: 2004
MS ISO 11173: 2002
MS ISO 11922-1: 2003
MS ISO 11922-2: 2003
MS ISO 12162: 2003
175
MS ISO 13760: 2003
176
177
178
179
MS ISO 15876-1: 2004
MS ISO 15876-2: 2004
MS ISO 15876-3: 2004
MS ISO 15876-5: 2004
180
MS ISO 15876-7: 2004
181
MS ISO 2505-1: 2002
168
Title of NS
Plastics piping systems – Guidance for the installation inside buildings of pressure piping systems for hot and
cold water intended for human consumption
Plastics piping systems – Injection-moulded thermoplastics fittings, valves and ancillary equipment –
Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping
components
Plastics piping systems –Thermoplastics pipes and fittings for hot and cold water – Test method for the
resistance of mounted assemblies to temperature cycling
Thermoplastics piping systems – End-load bearing mechanical joints between pressure pipes and fittings – Test
method for resistance to pull out under constant longitudinal force
Plastics piping systems – Mechanical joints between fittings and polyolefin pressure pipes – Test method for
leaktightness under internal pressure of assemblies subjected to bending
Plastics pipes and fittings - Determination of the opacity
Specification for unplasticised PVC (uPVC) pipes for water supply :Part 1 :Pipes (First revision)
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 2: Joints and fittings for use with
unplasticised PVC pipes: Section 2.1:uPVC joints and fittings
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 2: Joints and fittings for use with
unplasticised PVC pipes: Section 2.2:Solvent cement
Specification for unplasticised PVC (uPVC) pipes for water supply: Part 3: Guide for installation
Thermoplastics pipes and fittings for hot and cold water systems
Thermoplastics pipes – Determination of resistance to external blows – Staircase method
Thermoplastics pipes for the conveyance of fluids – Dimension and tolerances – Part 1 : Metric series
Thermoplastics pipes for the conveyance of fluids – Dimension and tolerances – Part 2 : Inch-based series
Thermoplastics materials for pipes and fittings for pressure application – Classification and designation – Overall
service (design) coefficient
Plastics pipes for the conveyance of fluids under pressure – Miner's rule – Calculation method for cumulative
damage
Plastics piping systems for hot and cold water installation – Polybutylene (PB) – Part 1: General
Plastics piping systems for hot and cold water installation – Polybutylene (PB) – Part 2: Pipes
Plastics piping systems for hot and cold water installation – Polybutylene (PB) - Part 3: Fittings
Plastics piping systems for hot and cold water installation – Polybutylene (PB) – Part 5: Fittings for purpose of
the system
Plastics piping systems for hot and cold water installation – Polybutylene (PB) – Part 7: Guidance for the
assessment of conformity
Thermoplastics pipes – Longitudinal reversion – Part 1: Determination methods
8
Remarks
165
No
National Standards
(NS)
No :
Year
(Construction
Materials)
182
183
184
MS ISO 2505-2: 2002
MS ISO 2507-1:2002
MS ISO 2507-2: 2002
185
186
187
MS ISO 3127: 2002
MS ISO 4065: 2003
MS ISO 727: 1997
188
MS ISO 9080: 2004
189
MS ISO 9852: 2002
190
191
192
MS ISO 9853: 2003
MS 2045: 2007
MS 2046 : 2007
193
194
MS 978:1985
MS 979: Part 1: 1985
195
MS 979: Part 2: 1985
Title of NS
Thermoplastics pipes – Longitudinal reversion – Part 2: Determination parameters
Thermoplastics pipes – and fittings – Vicat softening temperature – Part 1: General test method
Thermoplastics pipes – and fittings – Vicat softening temperature – Part 2: Test conditions for unplasticised
poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact
resistance poly(vinyl chloride) (PVC-HI) pipes
Thermoplastics pipes – Determination of resistance to external blows – Round-the clock method
Thermoplastics pipes – Universal wall thickness table
Fittings of unplasticised polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or
acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure – Dimensions of sockets –
Metric series
Plastics piping and ducting systems – Determination of the long-term hydrostatic strength of thermoplastics
materials in pipe form by extrapolation
Unplasticised poly(vinyl chloride) (PVC-U) pipes – Dichloromethane resistance at specified temperature (DCMT)
– Test method
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems – Crushing test
Chlorinated poly(vinyl chloride) (CPVC) plastic hot-and cold-water distribution systems - specification
Rigid poly(vinyl chloride) (PVC) compounds and chlorinated poly(vinyl chloride) (CPVC) compounds –
specification
Specification for plastics waste pipe and fittings
Specification for unplasticizes sewerage pipes and fittings: Part 1: Pipes of diameter 100 millimeter and 155
millimeter
Specification for unplasticized PVC underground sewerage pipes and fittings : Part 2: Pipes of diameter 200
milimetres and above
9
Remarks
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative
Requirements
(AR) – Reference No.
Street, Drainage and Building
Act, 1974 (Act 133)
Brief Description / or Title of TR / AR
MS 544 : Pt. 1 : 2001 - Code of Practice for Structural Use of Timber
MS 544 : Pt. 2 : 2001 - Code of Practice for Structural Use of Timber : Part 2 :
Permissible Stress Design of Solid Timber (First Revision)
MS 544 : Pt. 3 : 2001 - Code of Practice for Structural Use of Timber : Part 3 :
Permissible Stress Design of Glued Laminated Timber
MS 544 : Pt. 4 : Section 1 : 2001 - Code of Practice for Structural Use of Timber : Part 4
: Timber Panel Product : Section 1 : Structural Plywood
MS 544 : Pt. 4 : Section 2 : 2001 - Code of Practice for Structural Use of Timber : Part 4
: Timber Panel Product : Section 2 : Marine Plywood
MS 544 : Pt. 4 : Section 3 : 2001 - Code of Practice for Structural Use of Timber : Part 4
: Timber Panel Product : Section 3 : Cement Bonded Particle Board (CBP)
MS 544 : Pt. 5 : 2001 - Code of Practice for Structural Use of Timber : Part 5 : Timber
Joints
MS 544 : Pt. 6 : 2001 - Code of Practice for Structural Use of Timber : Part 6 :
Workmanship , Inspection and Maintenance (First Revision)
MS 544 : Pt. 7 : 2001 - Code of Practice for Structural Use of Timber : Part 7 : Testing
(First revision)
MS 544 : Pt. 9 : Section 1 : 2001 - Code of Practice for Structural Use of Timber : Part 9
: Fire Resistance of Timber Structures : Section 1 : Method of Calculating Fire
Resistance of Timber Members.
MS 544 : Pt. 11 : Section 1 : 2001 - Code of Practice for Structural Use of Timber : Part
11 : Recommended Span Tables and Their Calculations : Section 1 : Domestic Floor
Joists.
10
Remarks
(State TR or AR)
Technical Regulations (TR)
Administrative
Requirements
(AR) – Reference No.
Brief Description / or Title of TR / AR
MS 544 : Pt. 11 : Section 2 : 2001 - Code of Practice for Structural Use of Timber : Part
11 : Recommended Span Tables and Their Calculations : Section 2 : Ceiling Joists.
Akta Lembaga Perindustrian
Kayu Malaysia
Fire Services Act 1988
Customs Act 1967 Customs
(Prohibition of Imports)
(Amendment) Order 2004
MS 544: Pt. 11: Section 3: 2001 - Code of Practice for Structural Use of Timber: Part 11:
Recommended Span Tables and Their Calculations: Section 3: Ceiling Binders.
MS 228 : 1991 - Specification for Plywood
MS 229 : 1988 - Nomenclature and uses of commercial timbers in Malaysia
MS 471 : 2001 - Glossary of terms relating to timber and woodwork
MS 1401 : 1996 - Grading rule for dressed timber, door jambs and general moldings
MS 76 : 1972 - Specification for bricks and blocks of fired brickearth, clay or shale - Part
2: Metric units
MS 67 : Pt. 1 : 1972 - PVC Conduits
MS 888 : White portland cement
MS 522 : Part 1 : 2003 Portland cement (ordinary and rapid bardening) : Part 1
Specification (second revision)
MS 522 : Part 2 : 1989 Portland cement (ordinary and rapid bardening) : Part 2 :
Physical tests (First revision)
MS 522 : Part 3 : 1989 Portland cement (ordinary and rapid bardening) : Part 3 :
Chemical analysis (First revision)
MS 522 : Part 4 : 1989 Portland cement ( ordinary and rapid bardening) : Part 4 :
Spectrophotometric analysis of cement
MS 1037 : Sulphate-resisting portland cement
MS 1227 : Portland prolverized fuel ash cement
MS 1389 : Portland blast furnace cement
MS 1520 : Pozzolanic prolverised fuel ash cement
MS 1388 : High slag blast furnace cement
MS 794 : Masonry cement
MS 1061 : Part 1 : 1999 Vitrified clay pipes and fittings and pipes joints for drains and
sewers : Part 1 : Requirement (First revision)
MS 1061 : Part 2 : 1999 Vitrified clay pipes and fittings and pipes joints for drains and
sewers : Part 2 : Quality control and sampling
11
Remarks
(State TR or AR)
Technical Regulations (TR)
Administrative
Requirements
(AR) – Reference No.
Customs Act 1967
Customs (Prohibition of
Import) (Amendment) Order
2003
Customs Act 1967
Customs Duties (Exemption)
(Amendment) (No 4) Order
2008
Brief Description / or Title of TR / AR
MS 1061 : Part 3 : 1999 Vitrified clay pipes and fittings and pipes joints for drains and
sewers : Part 3 : Test Methods
MS ISO 13006 : Ceramic tiles : Definitions, classification, characteristic and markings.
MS 147 : Specification for quality of vitreous china sanitary appliances (First Revision)
MS 1522 : Specification for vitreous China water closet pans (First revision)
MS 795 : Specification for WC flushing cisterns and flush pipes (First revision)
MS 1462 : Steel Frame scaffoldings
MS 552 : Steel wires ropes and cables manufactured from stranded wires for electric
lifts (To be replaced with MS ISO 4344)
MS 144: 2006 - Cold-reduced mild steel wire for reinforcement of concrete (not plated or
coated, whether or not polished
MS 145 : 2006 - steel welded fabric (netting) manufactured from cold reduced mild steel
wires for reinforcement of concrete
MS 146: 2006 - Hot rolled steel bars for the reinforcement of concrete - Specification
(Third revision)
12
Remarks
(State TR or AR)
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulators
Item
1
2
Name
Ir Elias Ismail
Ir Sia Han See
Position
Department
Senior
General
Manager
Technology
and
Innovation
Sector
Construction Industry
Development Board
(CIDB)
Standards
and Quality
Division
Construction Industry
Development Board
(CIDB)
General
Manager
Address
Tel
Fax
E-mail
+603- 40411808
+603-40451808
elias@cidb.gov.my
+603-26170200
+603-40451808
hssia@cidb.gov.my
Level 8, Grand Seasons
Avenue, 72, Jalan
Pahang,
53000 Kuala Lumpur
Level 7, Grand Seasons
Avenue, 72, Jalan
Pahang,
53000 Kuala Lumpur
13
Member Country
:
Philippines
Date of Submission
:
09 October 2012
Submitted by
:
Atty. PEDRO VICENTE C. MENDOZA, Director-in-Charge, BPS
E-mail address
:
bps@dti.gov.ph
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 1 - National Standards for Construction Materials
No.
National Standards (NS)
No :
Year
(Construction Materials)
1
PNS 26:1992
2
PNS 63: 2006
Amd. 01:2010
3
PNS 07:2005
Amd 1:2008; Amd 2:2010
4
PNS ISO 13006:2007
5
PNS 49:2002
6
PNS 657:2008
7
PNS 193:2005
Title of NS
Steel - Black and hot-dipped zinc coated (galvanized)
longitudinally welded steel pipes (for ordinary use) –
Specification
Blended Hydraulic Cement with Pozzolan – Specification
Portland cement – Specification
Ceramic Tiles – Definitions, Classification, Characteristics &
Markings
Steel bars for concrete reinforcement – Specification
Hot-Rolled Steel Sections – Equal-Leg Angles Specifications
Flat Glass – Specification
Remarks
National Standards (NS)
No :
Year
(Construction Materials)
8
PNS 152:1987
Title of NS
Polybutylene (PB) pipes for potable water supply –
Specification
Polyethelene (PE) pipes for potable water supply –
Specification
9
PNS ISO 4427:2002
10
PNS 65:1993
11
PNS 14:1983
Amd. 01:1987
Unplasticized polyvinyl chloride (uPVC) electrical conduit –
Specification
12
PNS 1950:2003
Corrigendum 01:2003
Plastic piping systems for soil and waste discharge (Low &
High temp.) inside buildings – Unplasticized Polyvinyl
Chloride (PVC-U)
13
PNS 196:2000
Plywood – Specification
PNS 211:2002
Rerolled steel bars for concrete reinforcement –
Specification
15
PNS 156:2000
Sanitary wares – Specification
16
PNS 113:2005
Low carbon steel wires – plain, annealed & galvanized –
Specification
17
PNS 136:2000
Steel - Wire nails – Specification
14
Unplasticized polyvinyl chloride (uPVC) pipes for potable
water supply – Specification
Remarks
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative Requirements
(AR) – Reference No.
Brief Description / or Title of TR / AR
1.
Department Administrative
Order (DAO) 04:2008
The new rules and regulations concerning the Philippine Standard
(PS) Quality and/or Safety Certification Mark Scheme of the Bureau
of Product Standards (BPS)
2.
Department Administrative
Order (DAO) 05:2008
The new rules and regulations concerning the issuance of the Import
Commodity Clearance under the Product Certification Mark Scheme
of the Bureau of Product Standards (BPS)
3.
Department Administrative
Order (DAO) 02: 2007
Defines the responsibilities and liabilities of manufacturers,
importers, traders, wholesalers, distributors, retailers and/or their
agents, with regard to products covered by mandatory certification
and prescribes penalties for violation thereof
Remarks
(State TR or AR)
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulations
Item
Name
1
Atty. PEDRO VICENTE
C. MENDOZA
Position
Director-inCharge
Department
Address
Tel
Fax
Bureau of Product
Standards, Department
of Trade and Industry
3rd Floor, Trade and Industry
Building, 361 Sen. Gil J. Puyat
Avenue, Makati City,
Philippines
632-7513126
632-7514706
E-mail
bps@dti.gov.ph
Member Country : Singapore____________________
Date of Submission : 10 May 2007________________
Submitted by : Kenneth Lim_____________________
E-mail address : Kenneth_lim@spring.gov.sg______
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 1 - National Standards for Construction Materials
National Standards (NS)
No: Year
(Construction Materials)
SS 26 : 2000
Ordinary Portland cement
(Under review)
SS 476 : 2000
High Slag Blastfurnace cement
(Under review)
SS 477 : 2000
Portland Blastfurnace cement
(Under review)
SS 31 : 1998
Aggregates from natural sources for concrete
(Under review)
SS 289
Specification for concrete
(Under review)
Title of NS
Remarks
Part 1:2000 Guide to specifying concrete
Part 2:2000 Method for specifying concrete mixes
1
Part 3:2000 Specification for the procedures to be used in producing and
transporting concrete
Part 4:2000 Specification for the procedures to be used in sampling, testing and
assessing compliance of concrete
SS 320 : 1987
Concrete admixtures
SS 2
Specification for steel for the reinforcement of concrete
Part 3 : 1987 Plain and ribbed bars (Steel grades 250 and 460)
SS 18
Specification for cold-reduced steel wire for the reinforcement of concrete and the
manufacture of welded fabric - Part 2:1970 (Steel grade 460)
SS 32
Specification for welded steel fabric for the reinforcement of concrete - Part 2 :
1986 (Steel grade 460)
SS 470
Specification for hot-finished structural hollow sections of non-alloy and fine grain
structural steels
(Under review)
Part 1:1999 Technical delivery requirements
Part 2:1999 Tolerances, dimensions and sectional properties
SS 475
Specification for steel for the prestressing of concrete
Part 1 : 2000 General requirements (IDT ISO 6934)
Part 2:2000 Cold drawn wire (IDT ISO 6934)
Part 3:2000 Quenched and tempered wire (IDT ISO 6934)
2
Part 4:2000 Strand (IDT ISO 6934)
Part 5:2000 Hot rolled steel bars with or without subsequent processing (IDT ISO
6934)
SS 503
Cold formed welded steel structural hollow sections
Part 1 : 2003 Technical delivery requirements
Part 2 : 2003 Tolerances, dimensions and sectional properties
SS 104 : 1996
Cold-formed steel sections for general structures
Remarks. Additional information on the available test method specifications are listed below:
(More details on the SS can be obtained at http://www.singaporestandardseshop.sg/search/Search.aspx?type=2&search=73)
SS 73 series
Methods of sampling and testing of mineral aggregate, sand and fillers
SS 78 series
Testing concrete
SS 397 series
Methods of testing cement
SS 427 : 1998
Steel bars for reinforcement of concrete - Bend and rebend tests (IDT ISO
10065)
SS 456 : 1999
Metallic materials - Tensile testing at ambient temperature (IDT ISO 6892)
3
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative Requirements
(AR) – Reference No.
Brief Description / or Title of TR / AR
Remarks
(State TR or AR)
Chapter 29
Building Control Acts and Regulations
•
•
AR – Legislative Requirements
Can be downloaded from BCA website
(www.bca.gov.sg)
Regulation 27
Approved Document – Acceptable Solutions
•
•
TR
Can be downloaded from BCA website
(www.bca.gov.sg)
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulators
Item
1
Name
Ms Wai Hui Ling
Position
Senior Executive
Engineer
Department
Industrial and
Residential
Project
Department
Address
Building and
Construction
Authority
5 Maxwell Road
#05-00
MND Tower Block
Singapore 069110
Tel
Fax
E-mail
6325 7573
6325 7482
Wai_hui_ling
@bca.gov.sg
4
1/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
1
12-2530
Asbestos cement flat sheets
2
17-2532
Unplasticized polyvinyl chloride pipes
for drinking water services
3
18-2529
Asbestos-cement corrugated sheets
4
20-2543
Steel bars for reinforced concrete : round
bars
5
24-2548
Steel bars for reinforced concrete:
deformed bars
6
37-2529
Floor tiles
7
38-2531
Mosaic tile
8
54-2516
Ordinary sheet glass
9
55-2516
Flat and square steel bars
10
57-2533
Hollow load-bearing concrete masonry
units
11
58-2533
Hollow non-load-bearing concrete
masonry units
12
59-2516
Concrete building brick
13
60-2516
Solid load-bearing concrete masonry units
14
15
77-2545
79-2529
16
17
18
19
20
21
22
23
24
25
80-2550
81-2548
95-2540
102-2528
103-2528
107-2533
114-2526
133-2518
134-2531
138-2535
Building bricks
Asbestos - cement asymmetrical section
corrugated sheets
Mixed cements
Asbestos cement pressure pipes
Steel wires for prestressed concrete
Structural clay load-bearing tile
Structural clay non-load-bearing tile
Hollow structural steel sections
Steel nails for special purposes
White Portland cement
Mosaic parquet panels: teak
Steel binding wires
Remark
2/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
26
153-2540
Structural clay non-load-bearing screen
tiles
27
154-2518
Structural hollow clay floor tiles
28
158-2518
Clay plain roofing tiles
29
167-2528
Calcium silicate face bricks or sand-lime
bricks
30
168-2546
Facing bricks
31
169-2519
Structural clay facing tiles
32
178-2549
Veneer plywood
33
180-2532
Fibreboards: hard fibreboards
(hardboards)
34
188-2547
Gypsum plaster for building purpose
35
208-2521
Galvanized wire netting
36
216-2524
Rigid PVC conduit for electrical wiring
and telephone cable
37
219-2524
Gypsum plasterboards
38
224-2533
Precast non-reinforced concrete drainage
pipes
39
241-2543
Construction hydrated lime
40
248-2531
Corrugated sheet steel beams for highway
guardrail
41
249-2540
Malleable cast iron threaded pipe fittings
42
43
44
45
46
47
48
49
50
256-2540
Cast iron metal-seated gate valves for
water services
272-2549
Emulsion paints for general purposes
276-2532
Steel pipes
277-2532
Galvanized steel pipes
319 เลม 1-2551 Industrial lime Part 1 quicklime
319 เลม 2-2551 Industrial lime Part 2 hydrated lime
319 เลม 3-2551 Industrial lime Part 3 limestone
327-2538
Gloss enamel paint
328-2551
Aluminium priming paint for woodwork
Remark
3/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
51
343-2523
Water taps
Cationic asphalt emulsion for road
52
371-2530
53
357-2551
Priming paint for wood
54
378-2531
Concrete flooring tiles
55
379-2543
Terrazzo flooring tiles
56
382-2531
Cast iron: butterfly valves
57
383-2529
Cast iron check valves: swing type
58
390-2524
Aluminium paints
59
395-2524
Precast reinforced concrete piles
60
396-2549
Precast prestressed concrete piles
61
397-2524
Reinforced spun concrete piles
62
398-2537
Prestressed spun concrete piles
63
399-2524
Precast reinforced concrete short piles
64
415-2551
Traffic paint
65
420-2540
Steel wires strands for prestressed
concrete
66
422-2530
Teak conversions
67
424-2530
Structural timber
68
427-2531
Electrically welded steel water pipe
69
431-2529
Copper alloy gate valves
70
432-2529
Cast iron gate valves for general purposes
71
72
442-2525
445-2530
73
74
75
76
77
78
79
449-2530
468-2550
487-2526
490-2526
497-2526
499-2526
504-2527
Wood wool cement board
Hollow concrete blocks for concrete
composite floors
Suspended ceiling steel grids
White spirit for paint and varnish
Glasswool boards
Link clips for electrical wiring
Kiln-dried sawn timber
Slotted head wood screws
Wooden frames and panel frames for
door and window
Remark
4/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
80
514-2531
Steel wire ropes
81
516-2531
Impregnated sawn timber by CCA
compositions
82
528-2548
Hot rolled flat carbon steel of commercial
and drawing qualities
83
533-2530
Cast iron spigot and socket soil, waste
and ventilating pipes
84
535-2540
Concrete roofing tiles
85
549-2528
Refractory concretes
86
556-2528
Refractory mortars
87
566-2528
Concrete aggregates
88
576-2546
Precast prestressed concrete slabs for
concrete floor systems
89
593-2530
Steel rolling shutters: manual type
90
595-2528
Gypsum
91
596-2531
Door bolts: extruded brass and extruded
aluminium
92
598-2547
Dry mortar for masonry
93
613-2529
Glazed ceramic tiles for internal walls
94
614-2529
Ceramic tiles for external walls
95
621-2529
Building and sanitary asbestos cement
pipes
96
622-2529
Sewerage and drainage asbestos cement
pipes
97
699-2530
Cross-recessed head wood screws
98
724-2530
Teak spliced veneer
99
737-2549
Welded fabric steel for the reinforcement
of concrete
100
744-2530
Metal frames and panel frames for doors
and windows: aluminium windows
101
747-2531
Cold-drawn steel wire for concrete
reinforcement
Remark
5/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
102
756-2535
Cylindrical locks
103
757-2531
Padlocks
104
759-2531
Hinges for doors and windows: butt
hinges
105
763-2531
Square and hexagon head wood screws
106
770-2533
Zinc coated steel conduits for electrical
wiring
107
778-2531
Frame sets for adjustable louvre window
108
791-2544
109
792-2544
110
794-2544
111
795-2544
Vitreous china sanitary appliances: wash
basins
Vitreous china sanitary appliances: watercloset bowls
Vitreous china sanitary appliances:
squatting water-closet pans
Vitreous china sanitary appliances: urinals
112
796-2544
Vitreous china sanitary appliances: bidets
113
797-2544
114
801-2531
115
116
117
826-2531
827-2531
828-2546
118
829-2531
119
120
121
849-2532
850-2532
862-2532
Vitreous china sanitary appliances:
bathroom accessories
Tubular steel scaffolding: prefabricated
frame type
Cement mortar flooring tiles
Interlocking concrete paving blocks
Precast prestressed concrete elements for
composite floor systems
Metal frames and panel frames for doors
and windows: aluminium doors
Portland pozzolan cement
Pozzolan
Window hinges: friction hinges
Remark
6/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
122
863-2532
Steel frame systems for ceiling and wall
panel
123
876-2547
Flat pressed particleboards
124
877-2547
Extruded particleboards
125
878-2537
Cement bonded particleboards: high
density
126
880-2547
Clear float glass
127
894-2532
Metal frames and panel frames for doors
and windows: steel doors and windows
128
898-2532
129
910-2532
130
943-2533
131
132
133
951-2533
953-2533
963-2533
134
965-2537
135
136
137
966-2547
971-2533
979-2533
138
139
140
982-2548
992-2533
994-2533
141
999-2533
142
1006-2535
Adjustable baseplates for tubular steel
scaffolds
Polybutylene (PB) pressure pipe and
tubing for drinking water services
Cold-drawn deformed steel wire for
concrete reinforcement
Rubber bridge bearings
Metal curtain rails
Tongue and groove wood flooring strips:
nonteak
Glasses for use in building: tempered
glass
Medium density fibreboards (MDF)
Prestressed concrete fence posts
Unreinforced PVC hose for general
purposes
Polyethylene pipes for drinking water
Hinges for doors: spring hinges
Wood flooring strips with finger jointing:
nonteak
Unplasticized polyvinyl chloride pipes
for industrial use
Austenitic stainless steel pipes
Remark
7/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
143
1012-2533
Reinforced concrete water pipe
144
1013-2533
PVC door
145
1038-2535
Coated steel sheet roofing tiles
146
1043-2534
PVC windows
147
1052-2534
Roof drains
148
1053-2534
Floor drains
149
1057-2549
Premixed gypsum plasters
150
1093-2542
Flush valves for water-closets
151
1094-2542
Flush valves for urinals
152
1106-2535
Mosaic parquet panels: nonteak
153
1107-2535
Plastics laminated plywood for concrete
formwork
154
1128-2535
Roofing steel sheets
155
1131-2535
Unplasticized polyvinyl chloride fittings
for use with pressure pipes
156
113-2526
Round mild steel wire nails
157
1135-2544
Rubber waterstops
158
1138-2536
Solid wood parquet strips: nonteak
159
1146-2536
Rollers for aluminium sliding doors and
windows
160
1153-2536
Steel frame wall-panels
161
1164-2536
Precast reinforced concrete box sections
for drainage under sidewalk
162
1165-2536
Precast reinforced concrete box sections
for drainage with less than 0.6 m of cover
subjected to highway loading
163
1166-2536
164
165
166
1187-2547
1188-2536
1189-2536
Precast reinforced concrete box sections
for drainage with 0.6-3.0 m of cover
subjected to highway loading
Shower units
Faucets for bathtubs
Faucets for shower baths
Remark
8/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
167
1190-2536
Artificial marble sanitary appliances:
wash basins
168
1193-2536
Precast reinforced concrete drainage
manholes
169
1194-2536
Metal panels for concrete formwork
170
1220-2541
Fire-resistant doorsets: side hung
171
1221-2537
Solid wood parquet strips: teak
172
1222-2539
Glass for use in buildings: laminated
safety glass
173
1225-2537
Precast reinforced concrete drainage
manhole pipes
174
1226-2537
Precast reinforced concrete covers and
frames for manhole pipes
175
1227-2539
Hot rolled structural steel sections
176
1228-2549
Cold formed structural steel sections
177
1231-2537
Glass for use in buildings: insulating glass
178
1237-2537
179
1239-2537
180
125-2529
181
182
126-2548
1276-2538
183
184
185
1277-2547
1278-2547
128-2549
186
1288-2538
Precast reinforced concrete covers and
frames for manholes
PVC waterstops for sealing joints in
concrete
Asbestos cement joints for asbestos
cement drainaged pipes
Asbestos cement pressure couplings
Artificial marble sanitary appliances:
bathtubs
Faucets for sinks
Faucets for wash basins
Precast reinforced concrete drainage pipe
Metal frames and panel-frames for doors
and windows: cold formed steel doorsets
Remark
9/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
187
1301-2538
Tongue and groove solid wood flooring
strips: Teak
188
1302-2538
Solid wood flooring strips with tongueand-groove sides and ends: teak
189
1303-2538
Welded structural steel sections
190
1344-2541
Tinted float glass
191
1345-2539
Tinted sheet glass
192
1366-2539
Spacers for reinforced concrete
193
1367-2539
Solid wood flooring strips with tongueand-groove sides and ends: Nonteak
194
195
196
197
198
199
200
1368-2539
1377-2547
1384-2548
1390-2539
1395-2540
1407-2540
1410-2540
201
1413-2540
202
203
204
205
1414-2540
1417-2540
1427-2540
1439-2540
206
1479-2541
207
208
1482-2540
1483-2549
Air vent valves for water service
Self-closing faucets for wash basins
Polyethyene foam thermal insulation
Hot rolled steel sheet piles
Hollow glass blocks
Fibre-cement profile sheets
Unplasticized polyvinyl chloride pipe
fittings for soil, waste and vent (SWV)
applications
Cast iron rubber-seated gate valves for
water services
Metal fence panels
Marble slabs
Fibre-cement flat sheets
Austenitic stainless steel tubes for heatexchangers
Hot-rolled carbon steel coil, strip, plate
and sheet for general structure
PVC floor tiles
Fibreglass pressure pipes for water
services
Remark
10/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
209
1484-2540
Fibreglass pressure pipes for industrial
and sewerage services
210
1485-2540
Fibreglass non-pressure pipes for
industrial and sewerage services
211
1486-2540
Water supply hoses for sanitary wares :
plastics hose
212
1487-2540
Waste fittings for bathtubs
213
1490-2540
PVC-U lining steel pipes for water
services
214
1497-2548
Rinsing sprays
215
1499-2541
Hot-rolled carbon steel coil, strip, plate
and sheet for welded structure
216 15 เลม 1-2547 Portland cement Part 1 Specification
217
1500-2541
Metal gates
218
1505-2541
Autoclaved aerated lightweight concrete
elements
219
1510-2541
Autoclaved aerated reinforced
lightweight concrete panels
220
1568-2541
Fibreglass reinforced polyester doors
221
1569-2541
Fibreglass reinforced polyester frames for
doors
222
1651-2541
Metal frames and panel frames for doors
and windows: steel frames
223
1776-2542
Dry mortar for plastering
224
189-2519
Glazed vitrified clay sewer pipes
225
1898-2542
Plastics traps for discharge pipework
systems inside building
226
192-2549
Wood – based panel doors
227
193-2519
Solid wood parquet strips with
rectangular face
228
1984-2543
Glass fibre reinforced gypsum
plasterboards
Remark
11/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
229
2012-2543
Cold reduced carbon steel coil, strip and
sheet of commercial and drawing qualities
230
2035-2543
Interlocking concrete paving blocks for
heavy duty
Flush valves for sanitary wares :
environment requirements; water savings
Showers : environment requirements;
water - savings
Faucets for sanitary wares : environment
requirements; water - savings
231
2065-2544
232
2066-2544
233
2067-2544
234
235
2115-2545
2118-2545
Pre-finished multiply wood flooring
Plastic seats and covers for water-closets
236
237
213-2520
2133-2545
238
239
2147-2546
2148-2546
Ready-mixed concrete
Zinc coated flexible steel conduits for
electrical wiring
Automatic faucets for sanitary wares
Automatic faucets for sanitary wares :
environment requirements ; water-savings
240
241
2149-2546
2158-2547
242
2196-2547
243
2197-2547
244
245
2203-2547
2226-2548
Wall-faucets for bathroom
Solid wood flooring strips with finger
jointing : teak
Pipework-stainless steel fittings threaded
in accordance with iso 7-1
Non-alloy steel fittings threaded to ISO
7/1
Patterned glass
Precast concrete wall panels
Remark
12/24
Member Country : Thailand
Date of Submission : 19 Febuary 2009
Submitted by : Mr.Sirilak Boonchaiyo (Thai Industrial Standards Institute, Minist
Email : sirilakb@tisi.go.th
NoConstruction Material
National Standards (N
Title of NS
No : Year
246
2228-2548
Hot-dip aluminium/zinc-coated steel
sheet of commercial, drawing and
structural qualities
247
2253-2548
Ductile iron pipe fittings for water
pressure lines
248
2303-2549
Mineral fiber board thermal insulation
249
2314-2549
Aluminium composite panel walls
250
2316-2549
Lighting galvanized steel columns
251
2367-2551
Weld steel pipe for conveying oil gas and
high pressure liquid
252
2377-2551
Rubber flooring
253
2378-2551
Rubber paving blocks
254
2379-2551
Rubber seals for concrete joints
Remark
13/24
try of Industry)
14/24
try of Industry)
15/24
try of Industry)
16/24
try of Industry)
17/24
try of Industry)
18/24
try of Industry)
19/24
try of Industry)
20/24
try of Industry)
21/24
try of Industry)
22/24
try of Industry)
23/24
try of Industry)
24/24
try of Industry)
Member Country : VIET NAM
Date of Submission : April 24, 2007
Submitted by : Ms. Tran Tuyet Nhung - STAMEQ
E-mail address : qldp@fpt.vn; nhungtt03@yahoo.com
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 1 - National Standards for Construction Materials
National Standards (NS)
No :
Year
(Construction Materials)
1.
TCVN 4344-86
2.
TCVN 4345-86
3.
4.
5.
6.
7.
TCVN
TCVN
TCVN
TCVN
TCVN
8.
9.
TCVN 2119-91
TCVN 5440-91
10.
TCVN 2276-91
3110-79
3735-82
2231-89
4732-89
5592: 91
Title of NS
Clay for production of hard burnt tiles and
bricks. Sampling
Clay for production of hard-burnt tiles and
bricks. Physico-mechanical test methods
Concrete mixtures. Composition analysis
Active pozzolanic admixtures
Lime for construction
Facing stones. Specifications
Concrete. Curing requirements under natural
humidity conditions
Limestone
Concrete. Strength control and evaluation.
General
Reinforced concrete voided slabs for floors
and roofs of residential buildings
Remarks
11.
TCVN 5642:1992
12.
13.
TCVN 3106:1993
TCVN 3105:1993
14.
15.
16.
TCVN 3107:1993
TCVN 3108:1993
TCVN 3109:1993
17.
TCVN 3111:1993
18.
19.
20.
21.
22.
23.
24.
TCVN
TCVN
TCVN
TCVN
TCVN
TCVN
TCVN
25.
26.
TCVN 3119:1993
TCVN 3120:1993
27.
TCVN 5726:1993
28.
29.
34.
TCVN 2118:1994
TCVN 6016:1995
ISO 679:1989(E)
TCVN 6017:1995
ISO 9597:1989(E)
TCVN 6065:1995
TCVN 6074:1995
TCVN 6025:1995
ISO 3893:1977
TCVN 6071:1995
35.
TCVN 6069:1995
36.
37.
TCVN 4313:1995
TCVN 4033:1995
38.
TCVN 6072:1996
30.
31.
32.
33.
3112:1993
3113:1993
3114:1993
3115:1993
3116:1993
3117:1993
3118:1993
Natural block stones for producing facing
stones
Fresh concrete. Slump test method
Fresh concrete and heavy weight concrete.
Sampling, marking and curing test specimens
Fresh concrete. Vebe test method
Fresh concrete. Determination of density
Fresh concrete. Determination of mortar and
water segregation
Fresh concrete. Determination of air bubbles
content
Concrete. Determination of specific mass
Concrete. Determination of water absortivity
Concrete. Determination of abrasiveness
Concrete. Determination of density
Concrete. Determination of watertighless
Concrete. Determination of shrinkage
Concrete. Determination of compressive
strength
Concrete. Determination of flexural strength
Concrete. Determination of tensile spliting
strength
Concrete. Determination of prismatic
compressive strength and static modulus of
elasticity in compression
Silica bricks. Specifications
Cement. Test methods. Determination of
strength
Cements. Test methods. Determination of
setting time and soundness
Cement floor tiles
Granito floor tiles
Concrete. Classification by compressive
strength
Raw materials for portland cement production.
Clay mixtures
Low-heat portland cement. Technical
requirements
Roof tiles. Physic mechanical test method
Pozzolanic portland cement. Technical
requirements
Raw materials for portlant cement production.
39.
TCVN 6227:1996
40.
TCVN 6072:1996
41.
TCVN 6220:1997
42.
TCVN 6221:1997
43.
TCVN 6260:1997
44.
TCVN 6300:1997
45.
TCVN 6301:1997
46.
47.
48.
49.
50.
TCVN
TCVN
TCVN
TCVN
TCVN
51.
TCVN 6355-2:1998
52.
TCVN 6355-3:1998
53.
TCVN 6355-4:1998
54.
TCVN 6355-5:1998
55.
TCVN 6355-6:1998
56.
TCVN 6355-7:1998
57.
TCVN 6355-8:1998
58.
59.
60.
61.
62.
63.
TCVN
TCVN
TCVN
TCVN
TCVN
TCVN
6394:1998
6393:1998
1450:1998
1451:1998
6355-1:1998
6414:1998
6415:1998
141:1998
6416:1998
4710:1998
6533:1999
Limestone. Technical requirements
ISO standard sand for determination of cement
trength
Raw materials for portlant cement production.
Limestone. Technical requirements
Light aggregates for concrete. Expanded clay,
grawel and sand. Technical requirements
Light aggregates for concrete. Expanded clay,
grawel and sand. Test method
Portland blended cements. Technical
requirements
Raw material for producing of construction
ceramics. Clay. Technical requirements
Raw material for producing of construction
ceramics. Enriched kaolin. Technical
requirements
Net-wire concrete units irrigational canal
Net-wire concrete pumping pipes
Hollow clay bricks
Solid clay bricks
Bricks. Method of test. Part 1: Determination
of compressive strength
Bricks. Method of test. Part 2:Determination
of bend strength
Bricks. Method of test. Part 3: Determination
of water absortion
Bricks. Method of test. Part 4: Determination
of specific gravity
Bricks. Method of test. Part 5: Determination
of dencity
Bricks. Method of test. Part 6: Determination
of void area
Bricks. Method of test. Part 7: Determination
of pitting due to lime
Bricks. Method of test. Part 8: Determination
of efflorescence
Ceramic floor and wall tiles. Specification
Ceramic floor and wall tiles. Test methods
Cement. Methods of chemical analysis
Refractory Materials. Fireclay mortar
Refractory materials. Fireclay bricks
Alumosilicate refractories. Methods of
64.
TCVN 6530-1:1999
65.
TCVN 6530-2:1999
66.
TCVN 6530-3:1999
67.
TCVN 6530-4:1999
68.
TCVN 6530-5:1999
69.
TCVN 6530-6:1999
70.
71.
72.
73.
TCVN
TCVN
TCVN
TCVN
74.
TCVN 4435:2000
75.
76.
TCVN 5691:2000
TCVN 6587:2000
77.
TCVN 6588:2000
78.
TCVN 6530-7:2000
79.
TCVN 6820:2001
80.
81.
82.
TCVN 6882:2001
TCVN 6883:2001
TCVN 6884:2001
83.
84.
TCVN 6885:2001
ISO 10545-6:1995
TCVN 6927:2001
85.
TCVN 6926:2001
2682:1999
6476:1999
6477:1999
4434:2000
chemical analysis
Refractories. Methods of test. Part
1:Determination of cold compressive strength
Refractories. Methods of test. Part 2:
Determination of true density
Refractories. Methods of test. Part 3:
Determination of bulk density, water
absorption, apparent porosity and true
porosity
Refractories. Methods of test. Part 4:
Determination of pyrometric cone equivalent
(refractoriness)
Refractories. Methods of test. Part 5:
Determination of permanent change in
dimentions on heating
Refractories. Methods of test. Part 6:
Determination of refractoriness-under-load
Portland cement. Technical requirements
Interlocking concrete bricks
Concrete block bricks
Asbestos-cement corrugated sheets. Technical
requirements
Asbestos-cement corrugated sheets. Method of
test
White portland cement
Raw materials for production of fireclay
refractories. Clay
Raw materials for production of fireclay
refractories. caolin
Refractories. Method of test. Part 7:
Determination of thermal shock resistance
Barium contained porland cement. Methods of
chemical analysis
Mineral admixture for cement
Ceramic tiles. Granite. Specification
Ceramic tiles with low water absorption.
Specification
Ceramic tiles. Determination of resistance to
deep abrasion for unglazed tiles
Raw materials for producing construction
ceramics. Quartz
Raw materials for producing construction
87.
TCVN 4787:2001
EN 196-7:1989
TCVN 7218:2002
88.
89.
TCVN 7219:2002
TCVN 7190-1:2002
90.
TCVN 7190-2:2002
91.
92.
93.
94.
TCVN
TCVN
TCVN
TCVN
95.
TCVN 7133:2002
96.
TCVN 7134:2002
97.
98.
TCVN 7195:2002
TCVN 6530-8:2003
99.
100.
TCVN 7239:2003
TCVN 4030:2003
101.
102.
TCVN 4314:2003
TCVN 3121-1:2003
103.
TCVN 3121-2:2003
104.
TCVN 3121-3:2003
105.
TCVN 3121-8:2003
106.
TCVN 3121-9:2003
107.
TCVN 3121-6:2003
86.
7194:2002
7024:2002
7131:2002
7132:2002
glass. Dolomite
Cement. Methods of taking and preparing
samples
Sheet glass for construction. Clear float
glass. Specifications
Sheet glass for construction. Method of test
Refractories. Method for sampling. Part 1:
Sampling of raw materials and unshaped
products
Refractories. Method for sampling. Part 2:
Sampling and acceptance testing of shape
products
Thermal insulating materials. Classification
Trade portland cement clinker
Clay. Methods of chemical analysis
Ceramic floor and wall tiles. Definitions,
classification, characteristics and marking
Ceramic floor and wall tile, group BIIb (6% E
or % ). Specification
Ceramic floor and wall tiles, group BIII (E
10% ). Specification
Glazed roofing tiles
Refactories. Method of test. Part:
Determination of slag attack resistance
Skim coat
Cement. Test method for determination of
fineness
Mortar for masonry. Specifications
Mortar for masonry. Test methods. Part 1:
Determination of maximum particle size of
aggregate
Mortar for masonry. Test methods. Part 2:
Sampling and preparation of sample
Mortar for masonry. Test methods. Part 3:
Determination of consistence fresh mortar (by
flow table)
Mortar for masonry. Test methods. Part 8:
Determination of consistency retentivity
Mortar for masonry. Test methods. Part 6:
Determination of bulk density of fresh mortar
Mortar for masonry. Test methods. Part 6:
Determination of bulk density of fresh mortar
108.
TCVN 3121-10:2003
109.
TCVN 3121-11:2003
110.
TCVN 3121-12:2003
111.
TCVN 3121-17:2003
112.
TCVN 3121-18:2003
113.
TCVN 7368:2004
114.
TCVN 7364-1:2004
115.
TCVN 7364-2:2004
116.
TCVN 7364-3:2004
117.
TCVN 7364-4:2004
118.
TCVN 7364-5:2004
119.
TCVN 7364-6:2004
120.
121.
TCVN 7456:2004
TCVN 7455:2004
122.
TCVN 7452-1:2004
EN 1026:2000
TCVN 7452-2:2004
EN 1027:2000
TCVN 7452-3:2004
123.
124.
Mortar for masonry. Test methods. Part 10:
Determination of dry bulk density of hardened
mortars
Mortar for masonry. Test methods. Part 11:
Determination of flexural and compressive
strength of hardened mortars
Mortar for masonry. Test methods. Part 12:
Determination of adhesive strength of hardened
mortars on substrates
Mortar for masonry. Test methods. Part 17:
Determination of water soluble content
Mortar for masonry. Test methods. Part 18:
Determination of water absorption of hardened
mortars
Glass in building. Laminated and laminated
safety glass. Test methods for impact
resistance
Glass in building. Laminated glass and
laminated safety glass. part 1: Definitions
and description of component parts
Glass in building. Laminated glass and
laminated safety glass. Part 2: Laminated
safety glass
Glass in building. Laminated glass and
laminated safety glass. part 3: Laminated
glass
Glass in building. Laminated glass and
laminated safety glass. Part 4: Test methods
for durability
Glass in building. Laminated glass and
laminated safety glass. Part 5: Dimensions and
adge finishing
Glass in building. Laminated glass and
laminated safety glass. Part 6: Appearance
Glass in building. Wired glass
Glass in building. Thermally toughened safety
glass
Windows and doors. Test methods. Part 1:
Determination of air permeability
Windows and doors. Test methods. Part 2:
Determination of watertighness
Windows and doors. Test methods. Part 3:
125.
TCVN 7452-4:2004
126.
128.
TCVN 7452-5:2004
(ISO 8274:1985)
TCVN 7452-6:2004
ISO 9379:1989
TCVN 7451:2004
129.
130.
TCVN 1452:2004
TCVN 7445-1:2004
131.
132.
133.
134.
TCVN
TCVN
TCVN
TCVN
135.
TCVN 6068:2004
127.
136.
7445-2:2004
5438:2004
5439:2004
6067:2004
TCVN 6415-1 : 2005
(ISO 10545)
Determination of wind resistance
Windows and doors. Test methods. Part 4:
Determination of strength of welded corners
for U-PVC profiles
Windows and doors. Doorsets. Part 5:
Determination of closing force
Windows and doors. Doorsets. Part 6: Repeated
opening and closing test
Windows and doors made from unplasticized
polyvinyl chloride (PVC-U) extruded hollow
profiles. Specifications
Clay roofing tiles. Specifications
Oil well cement class G. Part 1: Technical
requirements
Oil well cement class G. Part 2: Test methods
Cements. Terminology and definitions
Cements. Classification
Sulphate resisting portland cement. Technical
requirements
Sulphate resisting portland cements. Method of
test for potential expansion of mortars
exposed to sulphate
Ceramic floor and wall tiles – Test methods −
Part 1: Sampling and product acceptance
Part 2: Determination of dimensions and
surface quality
Part 3: Determination of water absorption, apparent porosity,
apparent relative density and bulk density
Part 4: Determination of modulus of rupture and breaking strength
Part 5: Determination of impact resistance by measurement of
coefficient of restitution
Part 6: Determination of resistance to deep abrasion for unglazed
tiles
Part 7: Determination of resistance to surface
abrasion for glazed tiles
Part 8: Determination of linear thermal
expansion
Part 9: Determination of resistance to thermal
shock
Part 10: Determination of moisture expansion
Part 11: Determination of crazing resistance
for glazed tiles
Part 12: Determination of frost resistance
Part 13: Determination of chemical resistance
Part 14: Determination of resistance to stains
Part 15: Determination of lead and cadmium
given off by glazed tiles
Part 16: Determination of small colour
difference
Part 17: Determination of coefficient of
friction
Part 18: Determination of scratch hardness of
surface according to Mohs’ scale (EN 101 :
1991)
137
138
139
140
141
142
143
144
TCVN 4745 : 2005
Cements − List of properties
TCVN 6070 : 2005
Hydraulic cement − Test method for heat of
hydration
TCVN 6073 : 2005
Sanitary ceramic wares − Specifications
TCVN 7483 : 2005
Extruded ceramic floor and wall tiles −
Specifications
TCVN 7484 : 2005
Refractory materials – High alumina bricks
TCVN 7505 : 2005
Code of practice for application of glass in
building − Selection and installation
TCVN 7526 : 2005
Sheet glass in building − Definitions and
classification
TCVN 7527 : 2005
Glass in building − Rolling patterned glass
145
146
147
148
TCVN 7528 : 2005
Glass in building – Solar reflective coated
glass
TCVN 7529 : 2005
Glass in building − Heat absorbing tint glass
TCVN 7570 : 2006
Aggregates for concrete and mortar −
Specifications
TCVN 7572-1÷20 : 2006
Aggregates for concrete and mortar − Test
methods
Part 1: Sampling
Part 2: Determination of partical zise
distribution
Part 3: Guide for determination of
petrographic compositions
Part 4: Determination of apparent specific
gravity, bulk specific gravity and water
absorption
Part 5: Method for determination of apparent
specific gravity, bulk specific gravity and
water absorption of original stone and coarse
aggregate particles
Part 6: Determination of bulk density and
voids
Part 7: Determination of moisture
Part 8: Method for determination of content of
dust, mud and clay in aggregate and content of
clay lumps in fine aggregate
Part 9: Determination of organic impurities
Part 10: Method for determination of strength
and softening coefficient of the original
stone
Part 11: Determination of crushing value (ACV)
and softening coefficient of coarse aggregate
Part 12: Determination of resistance to
degradation of coasre aggregate by abration
and impact in the Los Angeles machine
Part 13: Determination of elongation and
flakiness index of coarse aggregate
Part 14: Determination of alkali silica
reactivity
Part 15: Determination of chloride content
Part 16: Determination of sulfate and sulfite
content
Part 17: Determination of feeble weathered
particle content
Part 18: Determination of crushed particle
content
Part 19: Determination of amorphous silicate
content
Part 20: Determination of mica content
fine aggregate
149
150
151
152
153
154
in
TCVN 5436 : 2006
Sanitary ceramic wares – Test methods
TCVN 4315 : 2006
Granulated blast furnace slag for cement
production
TCVN 4316 : 2006
Portland blast furnace slag cement
TCVN 7569 : 2006
Alumina cement
TCVN 7599 : 2006
Glass in building − Hollow glass blocks
TCVN 7624 : 2006
Mirrors − Mirrors from silver-coated float
glass
by wet-chemical technology− Specifications
155
156
TCVN 7625 : 2006
Mirrors − Method of test
TCVN 6530-9 : 2006
Refractory materials − Method of test −
Part 9: Determination of thermal conductivity
by the Hot-Wire method (cross-array)
157
158
TCVN
7636 : 2006
Refractory materials − Insulating fireclay
bricks
TCVN
7637 : 2006
Refractory materials − High alumina insulating
bricks
159
TCVN 7638 : 2006
Refractories − Determination of zirconium
dioxide
____________________
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
Part 2 - Technical Regulations / Administrative Requirements with respect to the control of construction materials.
Technical Regulations (TR)
Administrative Requirements
(AR) – Reference No.
Law on Building
Decision No. 50/2006/QD-TTg of March 7,
2006 of the Prime Minister
Brief Description / or Title of TR / AR
Remarks
(State TR or AR)
December 26, 2003 - Resolution No.
16/2003/QH 11 by National
Assembly
LIST OF GOODS SUBJECT TO THE
STATE QUALITY INSPECTION
To conduct respective investigation on quality
of locally-made and imported products.
(Atem 6. Those subject to the Ministry of
Construction)
Atem 6. Those subject to the Ministry of
Construction:
1. Portland cement - TCVN 2682:1999
2. Mixed Portland Cement - TCVN 6260:1997
3. Puzolan Portland Cement - TCVN 4033:1995
4. Sunphated Portland cement -TCVN 6067:2004
5. White Portland Cement -TCVN 5691:2000
6. Less radiate heat Portland cement - TCVN
6069:1995
7. Asbestos – cement roof - TCVN 4434:2000
8. Steel rod concrete paddle and concrete blocks
used for making floors and ceilings - TCXD
235:1999
ACCSQ WG 1 –
Information for the Directory of Standards and Technical Regulations / Requirements in the Construction Sector
PART 3 – List of Contact points : Construction / building related regulatiors
Item
Name
Position
Deputy
Mr. Nguyen The
Hung
Director
Department
Department of
Science and
Technology
(DST)Ministry of
Construction
Address
37 Le Dai
Hanh Str. HanoiVietnam
Tel
84 4
9760775
Fax
84 4 9762153
84 4 9780676
E-mail
dst-moc@hn.vnn.vn