TRANSMITTER/TRANSDUCER -6- TRANSMITTER/TRANSDUCER -6- TRANSMITTER/TRANSDUCER SU-DX DIGITAL AMPLIFIER FOR STRAIN GORGE Digital amplifier for strain gauge Characteristics Input: up to 4 strain gauge full bridges (350 ohms / summation) Input sensitivity: 0,1...5 mV/V Sensor supply: 5 VDC TARE IN - 11 SUPPLY +24 V 10 mA V OUT SUPPLY SUPPLY + DMS SHIELD SIGNAL SIGNAL + 9 8 7 6 5 4 3 2 1 13 12 11 10 9 8 7 6 5 4 3 2 1 Analogue output: 4...20 mA / 0...10 V (standard version) Voltage supply: 24 VDC +/-30% Resolution: 12 / 14 / 15 / 16 bit Combined error: 0,2% of end scale value Degree of protection: IP 20 Taring: with external drive Adjustment and output: RS232 interface Enclosure: plastics Mounting: top hat rail - +24 V 13 IN + 12 Technical data Input Output Analogue: 2 outputs (programmable) 0...10 V and 4...20 mA (standard) optionally 2...10 V or 0...20 mA Current: working resistance <500 Ohm Voltage: load resistor > 600 Ohm Interface: RS232 Sensor supply: 5 VDC 60 mA maximum Adjustment Interface: RS232 Measuring rate: 10 ms....5 s (programmable) Filter: 10 ms...5 s (programmable) Active: Passive: DIGITAL AMPLIFIER FOR STRAIN GAUGE Sensitivity: Interface: Tare up to 4 strain gauge full bridges 350 ohms (summation of signal) 0,1...5 mV/V (programmable) RS232 (for programming) drive with 24 VDC (externally) drive with potential free relay point (make contact) Power supply Voltage: 24 VDC, +/-30% Power consumption: with options approx. 1,5 W Residual ripple: 200 mV Mechanics Enclosure: Dimension: Mounting: Colour: Protection: Weight: Connection: Accessories Operating temperature:-10...+60°C Storing temperature: -20...+70°C Programming: cable set with adaptor and software - Ambient conditions plastics PA6 W38 x D76 x H74 top hat rail black degree IP 20 approx. 90 g 13-pole pin and socket connector 9-pole Sub-D socket Accuracy Resolution: at measuring rate: Combined error: Temperature coeff.: 12 /14 /15 /16 bit (programmable) 128 / 32 / 16 / 8 per second +/- 0,2% of end scale value <50 ppm/K Applications Mounted in an adequate housing the digital measuring amplifier is suitable for nearly all applications. It can be matched easily to the local conditions with the interface. As output is available a standard signal and serial RS232 for the following processing. DIGITAL AMPLIFIER FOR STRAIN GAUGE Amplifier: photo: www.pixelquelle.de SU-DX-1 TRANSMITTER/TRANSDUCER SU-DX -6- TRANSMITTER/TRANSDUCER -6- TRANSMITTER/TRANSDUCER Ordering code, dimension, connection DIGITAL AMPLIFIER FOR STRAIN GORGE Ordering code D L X X X X X X - Input: 0,1...5 mV/V Output: 4...20 mA / 0...10 V Supply: 24 VDC Enclosure: plastics for top hat rail Adjustment: factory-configuration* customized (please indicate)** Other / accessories: special model (please indicate) Sub-D cable set with adaptor and software for programming X X X 0 0 0 0 0 1 0 1 - *factory-set: sensitivity: 3 mV/V / analogue output: 0...10 V and 4...20 mA / resolution: 16 bit / measuring rate: 5/s / filter: 1s / tare: active (24 VDC) **the possibilities of the technical data can be selected. In case of not given values the details of factory-set are used. top view +24 V 13 IN + 12 TARE SUPPLY OUT IN - 11 +24 V 10 9 mA 8 V 7 6 5 SUPPLY - SUPPLY + 4 DMS SHIELD 3 2 1 SIGNAL SIGNAL + 13 12 11 10 9 8 7 6 5 4 3 2 1 front view side view 74 83 76 74 76 38 38 Connection (example) Programming TARE Windows PC +24 V IN - IN + +24 V V mA SHIELD SUPPLY + SUPPLY - SIGNAL + SIGNAL - SUPPLY OUT DMS DIGITAL AMPLIFIER FOR STRAIN GAUGE Dimensions (in mm) Adapter - 13 12 11 10 9 8 7 6 5 4 3 2 1 13 12 11 10 9 8 7 6 5 4 3 2 1 Strain gauge bridge (eg shear force call) Tare SU-DX-2 potentialfree relay point (option) signal + shield supply - external 24 VDC (standard) + DIGITAL AMPLIFIER FOR STRAIN GAUGE supply + signal - Power supply 24 VDC reference potential ( Processing voltage signal (eg SPS) current signal ) + Subject to change, version 38-565