Synthesis and Characterization of Porous Silica Ceramics for

advertisement

Synthesis and Characterization of Porous

Silica Ceramics for Thermal Insulation

Application

Nagarjun.S, Nallavelli Ramesh

Abstract

The scope of project work comprises measurement of physical, micro structural, mechanical, thermal properties and heat transfer simulation were carried out on assynthesized porous silica ceramics by direct foam method. In this investigation porous ceramics showed 86% porosity. The density and shrinkages were calculated from dimensional measurement method. The micro structural characterization was performed using scanning electron microscope (SEM) to evaluate the pore sizes within the sample. The mechanical strength for porous ceramics was evaluated by compression test using universal testing machine (UTM). For examining the thermal property of the porous samples, a thermal conductivity set up has been designed and fabricated (in-house) for measuring the thermal conductivity using heat transfer approach. The modeling of porous ceramic sample was done using Finite Element Analysis (FEA), to observe the temperature and heat flux distribution across the thickness.

Index Terms—FEA, Porosity, UTM, SEM

International Journal of Engineering and Technical Research (IJETR)

ISSN: 2321-0869, Volume-1, Issue-7, September 2013

References

[1] J.A. Lewis, Colloidal processing of ceramics, J. Am. Ceram. Soc. 83 (2000) 2341–2359.

[2] P. Sepulveda, Am. Ceram. Soc. Bull. 76 (10) (1997) 61–65.

[3] M.Scheffler, P. Colombo, Cellular Ceramics—Structure, Manufacturing and Applications, Wiley VCH,

Germany, 2005, pp. 291–310.

[4] J.S. Woyansky, C.E. Scott, W.P. Minnear, Am. Ceram. Soc. Bull. 71 (11) (1992) 1674–1682.

[5] H.N. Wang, P. Yuan, L. Zhou, Y.N. Guo, J. Zou, A.M. Yu, G.Q. Lu, C.Z. Yu, J. Mater. Sci. 44 (2009) 6484–

6489.

[6] F. Carn, A. Colin, M-.F. Achard, H. Deleuze, Z. Saadi, R. Backov, Adv. Mater. 16 (2004) 140–144.

[7] A.R. Studart, U.T. Gonzenbach, E. Tervoort, L.J. Gauckler, J. Am. Ceram. Soc. 89 (6) (2006) 1771–1789.

[8] Sarika Mishra, R. Mitra, M. Vijayakumar, J. Alloy& Compounds.504 (2010)76-82.

[9] Benjamin Iyenagbe UGHEOKE, Emmanuel Ogo ONCHE, Oliver Nicholas NAMESSAN, Gabriel Abasiaka

ASIKPO (2006), Property Optimization of Kaolin-Rice Husk Insulating Fire – Bricks, Leonardo Electronic

Journal of Practices and Technology, 9,167-178.

[10] ASTM International, E1225 (1999), Standard Test Method for Thermal Conductivity of Solids by

Means of the Guarded- Comparative-Longitudinal Heat Flow, pp. 1-8.

[11] ASTM International, Standard Test Method for Permeability of Refractories. C577-99 (1999) 99–102

[12]Sarika Mishra, R. Mitra, M. Vijayakumar, J. Eur. Ceram. Soc. 28 (2008) 1769–1776.

[13] Renjie ZENG, B.Rand (2005), Improvement of True Green Porosity, Sinterabilty and Microstructure in Alumina Ceramics by Filter Pressing, Journal of Materials Science & Technology, 21, 105-108.

[14]Sarika Mishra, R. Mitra, M. Vijayakumar (2008), Light weight silica tiles through foam casting method, Journal of the European Ceramic society, 28, 1769-1776.

[15] Mohsen K. Khorasgani, Abdolghafar Barzegar (2010), Effect of Fabrication Parameters on

Morphology of Porous Kaolin Ceramics, TMS Annual meeting & Exhibition, February 14-18, 2010.

[16] J. Luyten, S. Mullens, J. Cooymans, A.M. De Wilde, I. Thijs, R. Kemps (2009), Different methods to synthesize ceramic foams, Journal of the European Ceramic Society, 29, 829-832.

International Journal of Engineering and Technical Research (IJETR)

ISSN: 2321-0869, Volume-1, Issue-7, September 2013

[17] Sarika Mishra, R. Mitra, (2010), Rational design in suspension rheology of cellular silica, Journal of

Alloys and Compounds, 506, 308-312.

[18] S.M. Olhero, J.M.F. Ferreira, Influence of particle size distribution on rheology and particle packing of silica-based suspensions, Powder Technol. 139 (2004) 69–75.

International Journal of Engineering and Technical Research (IJETR)

ISSN: 2321-0869, Volume-1, Issue-7, September 2013

Download