Study Guide: Magnetism and Electricity Investigations 2&3
Test: Wednesday, April 23rd








Be able to identify a picture of a D-cell, circuit board, schematic diagram, bulb,
switch, motor, Fahnestock clip (wire holders).
Vocabulary to review: circuit, filament, series circuit, parallel circuit
Explain how a conductor allows electricity to flow through metal
Be able to give examples of electricity receivers (ex. Anything that uses
electricity)
Be able to explain the difference between an open circuit and a closed circuit.
Be able to explain the difference between a series circuit and a parallel circuit.
Be able to tell the purpose of an insulator ( ex. Rubber around a wire)
Be able to draw a schematic diagram of a circuit (both series and parallel)
** Use your notes to help you. Good luck!
Study Guide: Magnetism and Electricity Investigations 2&3
Test: Wednesday, April 23rd








Be able to identify a picture of a D-cell, circuit board, schematic diagram, bulb,
switch, motor, Fahnestock clip (wire holders).
Vocabulary to review: circuit, filament, series circuit, parallel circuit
Explain how a conductor allows electricity to flow through metal
Be able to give examples of electricity receivers (ex. Anything that uses
electricity)
Be able to explain the difference between an open circuit and a closed circuit.
Be able to explain the difference between a series circuit and a parallel circuit.
Be able to tell the purpose of an insulator ( ex. Rubber around a wire)
Be able to draw a schematic diagram of a circuit (both series and parallel)
** Use your notes to help you. Good luck!
Study Guide: Magnetism and Electricity Investigations 2&3
Test: Wednesday, April 23rd








Be able to identify a picture of a D-cell, circuit board, schematic diagram, bulb,
switch, motor, Fahnestock clip (wire holders).
Vocabulary to review: circuit, filament, series circuit, parallel circuit
Explain how a conductor allows electricity to flow through metal
Be able to give examples of electricity receivers (ex. Anything that uses
electricity)
Be able to explain the difference between an open circuit and a closed circuit.
Be able to explain the difference between a series circuit and a parallel circuit.
Be able to tell the purpose of an insulator ( ex. Rubber around a wire)
Be able to draw a schematic diagram of a circuit (both series and parallel)
** Use your notes to help you. Good luck!